Publications

Found 167 results
Author Title [ Type(Asc)] Year
Filters: Author is Sheplak, M  [Clear All Filters]
Conference Paper
Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.
Tuzzo, S., D. Martin, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS-Based Sound Intensity Probe", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3260, Hilton Head, SC, May, 2003.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.
Sheplak, M., and J. Seiner, "A MEMS Microphone for Aeroacoustics Measurements", 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A MEMS Direct Skin Friction Sensor", Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.
Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Gallas, Q., J. Mathew, A. Kasyap V.S., R. Holman, T. Nishida, B. Carroll, M. Sheplak, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0125, Reno, NV, January, 2002.
V.S., A. Kasyap, A. Phipps, M. Sheplak, K. Ngo, T. Nishida, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric Beams for Vibrational Energy Reclamation", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-, November, 2006.
Gallas, Q., R. Holman, R. Raju, R. Mittal, M. Sheplak, and L. Cattafesta, "Low Dimensional Modeling of Zero-Net Mass Flux Actuators", 2nd AIAA Flow Control Conference, AIAA Paper 2004-2413, Portland, OR, June, 2004.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.
Griffin, B. A., B. Homeijer, M. D. Williams, B. V. Sankar, and M. Sheplak, "Large Deflections of Clamped Composite Circular Plates with Initial In-Plane Tension", IMAC XXVI, A Conference and Exposition on Structural Dynamics, Orlando, FL, February, 2008.
Utturkar, Y., R. Holman, R. Mittal, B. Carroll, M. Sheplak, and L. Cattafesta, "A Jet Formation Criterion for Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0636, Reno, NV, January, 2003.
Barnard, C., J. Meloy, and M. Sheplak, "An instrumentation grade wall shear stress sensing system", 2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.
Martin, D., K. Kadirvel, T. Nishida, and M. Sheplak, "An Instrumentation Grade MEMS Condenser Microphone for Aeroacoustic Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-257, January, 2008.