Publications

Found 1223 results
[ Author(Desc)] Title Type Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
S
Sheplak, M., E. Spina, and C. McGinley, "Hot-Film Anemometry in Hypersonic Flow", 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2232, Colorado Springs, CO, June, 1994.
Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear Stress Sensor using Stokes Layer Excitation", AIAA Journal, vol. 39, issue 5, no. 5, pp. 819-823, JUN, 2001.
Sheplak, M., "MEMS-Based acoustic sensors for fluid mechanics and aeroacoustics", The Journal of the Acoustical Society of America, vol. 141, issue 5, pp. 3721 - 3721, Jan-05-2017.
Sheplak, M., and J. Seiner, "A MEMS Microphone for Aeroacoustics Measurements", 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Sheplak, M., and J. Dugundji, "Large Deflections of Clamped Circular Plates Under Tension and Transitions to Membrane Behavior", J. Appl. Mech., vol. 65, no. 1, pp. 107-115, JUN, 1998.
Sheplak, M., and E. Spina, "Elimination of Impinging Jet Resonance", 31st AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 93-0733, Reno, NV, January, 1993.
Sheplak, M., A. Cain, T. Nishida, and L. Cattafesta, "Characterization of a Micromachined Thermal Shear Stress Sensor", AIAA Journal, vol. 40, no. 6, pp. 1099-1104, APR, 2002.
Sheplak, M., E. Spina, and C. McGinley, "Progress in Hot-Film Anemometry for Hypersonic Flow", Experimental Thermal and Fluid Science, vol. 13, no. 1, pp. 21-28, JUL, 1996.
Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear-Stress Sensor Using Stokes Layer Excitation", 36th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 98-0585, Reno, NV, January, 1998.
Sheplak, M., L. Cattafesta, and Y. Tian, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 67-73, 2008.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly with angular orientation and selective bonding", 2009 NSF CMMI Engineering Research and Innovation Conference, Honolulu, HI, 06/2009.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Part-to-Part and Part-to-Substarte Magnetic Self-Assembly of Millimeter Scale Components with Angular Orientation", Tech. Dig. 22nd IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2009), Sorrento, Italy, pp. 669-672, January, 2009.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly of millimeter-scale components with angular orientation", J. Micromech. Syst., vol. 19, issue 3, pp. 599-609, 06/2010.
Shetye, S., J. Agashe, and D. P. Arnold, "Investigation of microscale magnetic forces for magnet array self-assembly", IEEE Trans. Magn., vol. 43, no. 6, pp. 2713-2715, JUN, 2007.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008.
Shetye, S., and D. P. Arnold, "Magnetic self-assembly of millimeter scale components", 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN, 01/2008.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly of multiple component types: simultaneous and sequential sorting of a heterogeneous mixture", Proc. 6th Conf. Foundations of Nanoscience (FNANO 2009), Snowbird, UT, 04/2009.
Shukla, S., A. Baev, H. Jee, R. Hu, R. Burzynski, Y.K. Yoon, and P. N. Prasad, "Large-Area, Near-Infrared (IR) Photonic Crystals with Colloidal Gold Nanoparticles Embedding", ACS Applied Materials and Interfaces, vol. 2, 2010.
Shukla, S., X. Vidal, E. P. Furlani, M. T. Swihart, K. T. Kim, Y.K. Yoon, A. Urbas, and P. N. Prasad, "Subwavelength direct laser patterning of conductive gold nanostructures by simultaneous photopolymerization and photoreduction", ACS Nano, vol. 5 (3), 2011.
Shukla, S., K. Tae Kim, A. Baev, Y.K. Yoon, N. Litchinitser, and P. N. Prasad, "Fabrication and Characterization of Gold-Polymer Nanocomposite Plasmonic Nanoarrays in a Porous Alumina Template", ACS Nano, vol. 4, 2010.
Siauw, W. Long, J-P. Bonnet, J. Tensi, and L. Cattafesta, "Physics of Separated Flow over a NACA 0015 Airfoil and Detection of Flow Separation", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-144, January, 2009.
Siauw, W. Long, J-P. Bonnet, J. Tensi, L. Cordier, B. Noack, and L. Cattafesta, "Transient dynamics of the flow around a NACA 0015 airfoil using fluidic vortex generators ", International Journal of Heat and Fluid Flow, vol. 31, issue 3, pp. 450-459, 06/2010.
Siauw, W. Long, J-P. Bonnet, J. Tensi, L. Cordier, B. Noack, and L. Cattafesta, "Impulsive Flow Attachment Process over a NACA 0015 under the Action of Fluidic Vortex Generators (FVG)", Sixth International Symposium on Turbulence and Shear Flow Phenomenon, Seoul, South Korea, June, 2009.
Smarslok, B. P., D. Alexander, R. T. Haftka, L. Carraro, and D. Ginsbourger, "Separable Monte Carlo Simulation Applied to Laminated Composite Plates Reliability", 49th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, AIAA, 04/2008.