Publications
"Uncertainty analysis of the two-microphone method", J. Sound Vib., vol. 304, no. 1-2, pp. 91-109, JUL, 2007.
, "Vibration of Post-Buckled Homogeneous Circular Plates", IEEE Ultrasonics Symposium, 2007: IEEE, October, 2007.
, "An Analytical Electroacoustic Model of a Piezoelectric Composite Circular Plate", AIAA Journal, vol. 44, no. 10, pp. 2311-2318, OCT, 2006.
, "Comparison of the two microphone method and the modal decomposition method for acoustic impedance testing", 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2695, Cambridge, MA, May, 2006.
, "Development of a MEMS Dual Backplate Capacitive Microphone for Aeroacoustic Measurements", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-1246, Reno, NV, January, 2006.
, "Experimental Study of Acoustic Impedance of MEMS-Based Micro-Perforated Liners", 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2401, Cambridge, MA, May, 2006.
, "Lumped Element Modeling of Piezoelectric Beams for Vibrational Energy Reclamation", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-, November, 2006.
, "A MEMS Acoustic Energy Harvester", J. Micromech. Microeng., vol. 16, pp. S174-S181, SEP, 2006.
, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.
, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
, "Noise Modeling and Characterization of Piezoresistive Transducers", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-15392, November, 2006.
, "Optimization of an Electromechanical Helmholtz Resonator", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
, "Optimized Design of Piezoelectric Flap Actuators for Active Flow Control", AIAA Journal, vol. 44, no. 12, pp. 2919-2928, SEP, 2006.
, "Piezoresistive Microphone Design Pareto Optimization: Tradeoff between Sensitivity and Noise Floor", J. Microelectromechanical Systems, vol. 15, no. 6, pp. 1632-1643, DEC, 2006.
, "A Self-Powered Wireless Active Acoustic Liner", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
, "Source of Excess Noise in Silicon Piezoresistive Microphones", J. Acoustical Society of America, vol. 119, pp. 2710-2720, MAY, 2006.
, "Wireless Hydrogen Sensor Self-powered Using Ambient Vibration and Light", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-14644, November, 2006.
, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.
, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.
, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
, "Dynamic calibration technique for thermal shear-stress sensors", Experiments in Fluids, vol. 38, pp. 56-65, JUL, 2005.
, "Effect of Conjugate Heat Transfer on MEMS-Based Thermal Shear Stress Sensor", Numerical Heat Transfer-A, vol. 48, no. 3, pp. 197-217, AUG, 2005.
,