Publications

Found 167 results
Author Title [ Type(Desc)] Year
Filters: Author is Sheplak, Mark  [Clear All Filters]
Conference Paper
Chen, T-A., D. Mills, V. Chandrasekharan, H. Zmuda, and M. Sheplak, "Optical Miniaturization of a MEMS-Based Floating Element Shear Stress Sensor with Moir", 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-0498, 01/2010.
Liu, F., S. Horowitz, L. Cattafesta, and M. Sheplak, "Optimization of an Electromechanical Helmholtz Resonator", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
Gallas, Q., G. Wang, M. Papila, M. Sheplak, and L. Cattafesta, "Optimization of Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0635, Reno, NV, January, 2003.
Sells, J., V. Chandrasekharan, H. Zmuda, M. Sheplak, and D. P. Arnold, "Passive Wireless Direct Shear Stress Measurement", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.
Rosenberg, K. T., S. Duvvuri, M. Luhar, B. J. McKeon, C. Barnard, B. Freidkes, J. Meloy, and M. Sheplak, "Phase relationships between velocity, wall pressure, and wall shear stress in a forced turbulent boundary layer", 46th AIAA Fluid Dynamics Conference, Washington, D.C.Reston, Virginia, American Institute of Aeronautics and Astronautics, 2016.
Blood, D., D. Mills, M. Sheplak, and T. Schmitz, "Picosecond Laser Ablation of Sapphire for High Temperature Sensor Fabrication", Technologies for Future Micro-Nano Manufacturing Workshop, Napa, CA, Transducers Research Foundation, 08/2011.
Papila, M., R. T. Haftka, T. Nishida, and M. Sheplak, "Piezoresistive Microphone Design Pareto Optimization: Tradeoff Between Sensitivity and Noise Floor", 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2003-1632, Norfolk, VA, April, 2003.
Arnold, D. P., S. Bhardwaj, S. Gururaj, T. Nishida, and M. Sheplak, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
Kurdila, A., B. Carroll, T. Nishida, and M. Sheplak, "Reduced Order Modeling for Low Reynolds Number Flow Control", Proceedings of SPIEs 6th Annual International Symposium on Smart Structures and Materials, Mathematics Modeling and Control Conference, vol. 3667, Newport Beach, CA, pp. 68-79, March, 1999.
Wang, Z., J. Li, T. Nishida, and M. Sheplak, "Robust Capon Beamformers for Wideband Acoustic Imaging", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3198, Hilton Head, SC, May, 2003.
Griffin, B. A., D. Mills, T. Schmitz, and M. Sheplak, "A Sapphire Based Fiber Optic Dynamic Pressure Sensor for Harsh Environments: Fabrication and Characterization", 49th AIAA Aerospace Sciences Meeting, Orlando, FL, AIAA, 01/2011.
Griffin, B. A., D. Mills, T. Schmitz, and M. Sheplak, "Sapphire Sensors for High Temperature Applications", Florida Center for Advanced Aero-Propulsion Annual Technical Symposium, Tallahassee, FL, 08/2010.
Saini, R., S. Bhardwaj, T. Nishida, and M. Sheplak, "Scaling Relations for Piezoresistive Microphones", International Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2000.
Kadirvel, S., F. Liu, S. Horowitz, T. Nishida, K. Ngo, L. Cattafesta, and M. Sheplak, "A Self-Powered Wireless Active Acoustic Liner", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
Bhardwaj, S., M. Sheplak, and T. Nishida, "S/N Optimization and Noise Considerations for Piezoresistive Microphones", 16th International Conference on Noise in Physical Systems and 1/f Fluctuations, Gainesville, FL, World Scientific, pp. 549-552, October, 2001.
Martin, D., K. Kadirvel, J. Liu, R. M. Fox, M. Sheplak, and T. Nishida, "Surface and Bulk Micromachined Dual Back-Plate Condenser Microphone", 18th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2005), Miami, FL, January, 2005.
Martin, D., K. Kadirvel, T. Nishida, and M. Sheplak, "A Surface Micromachined Capacitive Microphone for Aeroacoustic Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2008.
Barnard, C., D. Mills, and M. Sheplak, "A system for vector measurement of aerodynamic wall shear stress", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.
Taylor, R., F. Liu, S. Horowitz, K. Ngo, T. Nishida, L. Cattafesta, and M. Sheplak, "Technology Development for Electromechanical Acoustic Liners", Active 04 Paper a04-093, Williamsburg, VA, September, 2004.
Horowitz, S., A. Kasyap V.S., F. Liu, D. Johnson, T. Nishida, K. Ngo, M. Sheplak, and L. Cattafesta, "Technology Development for Self-Powered Sensors", 1st AIAA Flow Control Conference, AIAA Paper 2002-2702, St. Louis, MO, June, 2002.
Chandrasekaran, V., M. Sheplak, L. Cattafesta, and B. V. Sankar, "Thermoelastic Actuation: Solution for Circular Composite Plates with Application in MEMS", International Mechanical Engineering Congress and Exposition, ASME Paper IMECE2002-39334, New Orleans, LA, November, 2002.
Chandrasekaran, V., E. Chow, T. Kenny, T. Nishida, L. Cattafesta, B. V. Sankar, and M. Sheplak, "Thermoelastically Actuated Acoustic Proximity Sensor with Integrated Through-Wafer Interconnects", Solid-State Sensor and Actuator Workshop, Hilton Head, SC, pp. 102-107, June, 2002.
Chandrasekaran, V., E. Chow, T. Kenny, T. Nishida, and M. Sheplak, "Through Wafer Electrical Interconnects for MEMS Sensors", Proceedings of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23846, vol. 2, New York, NY, November, 2001.
Liu, F., S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, "A Tunable Electromechanical Helmholtz Resonator", 9th AIAA/CEAS Aeroacoustics Conference and Exhibit, AIAA Paper 2003-3145, Hilton Head, SC, May, 2003.
McGinley, C., E. Spina, and M. Sheplak, "Turbulence Measurements in a Mach 11 Helium Boundary Layer", 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2364, Colorado Springs, CO, June, 1994.