Publications

Found 167 results
Author [ Title(Asc)] Type Year
Filters: Author is Sheplak, Mark  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
M
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Sheplak, M., "MEMS-Based acoustic sensors for fluid mechanics and aeroacoustics", The Journal of the Acoustical Society of America, vol. 141, issue 5, pp. 3721 - 3721, Jan-05-2017.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.
Sheplak, M., and J. Seiner, "A MEMS Microphone for Aeroacoustics Measurements", 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A MEMS Direct Skin Friction Sensor", Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "A MEMS Acoustic Energy Harvester", J. Micromech. Microeng., vol. 16, pp. S174-S181, SEP, 2006.
Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
L
Gallas, Q., J. Mathew, A. Kasyap V.S., R. Holman, T. Nishida, B. Carroll, M. Sheplak, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0125, Reno, NV, January, 2002.
Gallas, Q., R. Holman, T. Nishida, B. Carroll, M. Sheplak, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators", AIAA Journal, vol. 41, issue 2, no. 2, pp. 240-247, MAR, 2003.
V.S., A. Kasyap, A. Phipps, M. Sheplak, K. Ngo, T. Nishida, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric Beams for Vibrational Energy Reclamation", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-, November, 2006.
Gallas, Q., R. Holman, R. Raju, R. Mittal, M. Sheplak, and L. Cattafesta, "Low Dimensional Modeling of Zero-Net Mass Flux Actuators", 2nd AIAA Flow Control Conference, AIAA Paper 2004-2413, Portland, OR, June, 2004.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.
Griffin, B. A., B. Homeijer, M. D. Williams, B. V. Sankar, and M. Sheplak, "Large Deflections of Clamped Composite Circular Plates with Initial In-Plane Tension", IMAC XXVI, A Conference and Exposition on Structural Dynamics, Orlando, FL, February, 2008.
Sheplak, M., and J. Dugundji, "Large Deflections of Clamped Circular Plates Under Tension and Transitions to Membrane Behavior", J. Appl. Mech., vol. 65, no. 1, pp. 107-115, JUN, 1998.
J
Utturkar, Y., R. Holman, R. Mittal, B. Carroll, M. Sheplak, and L. Cattafesta, "A Jet Formation Criterion for Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0636, Reno, NV, January, 2003.
I
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
Sheplak, M., L. Cattafesta, and Y. Tian, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 67-73, 2008.
Barnard, C., J. Meloy, and M. Sheplak, "An instrumentation grade wall shear stress sensing system", 2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.
Martin, D., K. Kadirvel, T. Nishida, and M. Sheplak, "An Instrumentation Grade MEMS Condenser Microphone for Aeroacoustic Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-257, January, 2008.
H
Sheplak, M., E. Spina, and C. McGinley, "Hot-Film Anemometry in Hypersonic Flow", 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2232, Colorado Springs, CO, June, 1994.
Zhou, H., D. A. Mills, A. Vera, A. Garraud, W. Oates, and M. Sheplak, "A High-Temperature Optical Sapphire Pressure Sensor For Harsh Environments", AIAA Scitech 2019 Forum, San Diego, CaliforniaReston, Virginia, American Institute of Aeronautics and Astronautics, 2019.
Liu, J., D. Martin, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Harmonic Balance Nonlinear Identification of a capacitive dual-backplate MEMS microphone", J. Microelectromechanical Systems, vol. 17, no. 3, pp. 698-708, JUN, 2008.