Publications

Found 189 results
Author [ Title(Asc)] Type Year
Filters: First Letter Of Title is M  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
M
Kim, J., and Y.K. Yoon, "Microworld: United We Stand", Lab on a Chip, vol. 10, 2010.
Peng, C., H. Lai, M. E. Orazem, and S. Moghaddam, "Microstructure of clay fabric in electrokinetic dewatering of phosphatic clay dispersions", Applied Clay Science, vol. 158, pp. 94 - 101, Jan-06-2018.
Fazeli, A., and S. Moghaddam, "Microscale phase separator for selective extraction of CO 2 from methanol solution flow", Journal of Power Sources, vol. 271, pp. 160 - 166, Jan-12-2014.
Fazeli, A., and S. Moghaddam, "Microscale Phase Separation through Nanoporous Membranes", ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, 2013.
Garraud, A., O. D. Oniku, W. C. Patterson, E. Shorman, D. LeRoy, N. M. Dempsey, and D. P. Arnold, "Microscale Magnetic Patterning Of Hard Magnetic Films Using Microfabricated Magnetizing Masks", 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), San Francisco, CA, IEEE, 2014.
Fazeli, A., S. Bigham, and S. Moghaddam, "Microscale layering of liquid and vapor phases within microstructures for a new generation two-phase heat sink", International Journal of Heat and Mass Transfer, vol. 95, pp. 368 - 378, Jan-04-2016.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.
Zito, J., D. P. Arnold, T. Houba, J. Soni, R. Durscher, and S. Roy, "Microscale dielectric barrier discharge plasma actuators: performance characterization and numerical comparison", 43rd AIAA Plasmadynamics and Lasers Conf., New Orleans, LA, AIAA, 06/2012.
Bigham, S., and S. Moghaddam, "Microscale Analysis of Mechanisms of Heat Transfer in Microchannel Flow Boiling Process", 15th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM), Cambridge, MA, 2017.
Xu, X., K. Liu, and Z.H. Fan, "Microscale 2D separation systems for proteomic analysis", Expert Review of Proteomics, vol. 9, issue 2, pp. 135 - 147, 04/2012.
Morgan, B. C., S. S. Bedair, W. Nothwang, D. P. Arnold, C. D. Meyer, B. Bowers, A. Sopeju, C. M. Dougherty, L. Xue, and R. Bashirullah, "Micro-power requirements & conversion for autonomous microsystems", NATO SET-150 Specialist Meeting on Energy Technologies & Management for Portable Power for Military Applications, Brdo pri Kranju, Slovenia, 05/2009.
Moghaddam, S., "Micro/Nanoengineering the Next Generation Thermal-Fluid and Energy Conversion Systems", ASME Heat Transfer, Fluid Engineering, and Nanochannels and Microchannels Conference, Puerto Rico, USA, 07/2012.
Cros, F., D. P. Arnold, M. G. Allen, S. Das, H. Koser, and J. H. Lang, "Micro-magnetic induction machines for portable power applications", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 17-21, April, 2003.
Z. Fan, H., and D. J. Harrison, "Micromachining of capillary electrophoresis injectors and separators on glass chips and evaluation of flow at capillary intersections", Analytical Chemistry, vol. 66, pp. 177-184, SEP, 1994.
Harrison, D. J., K. Fluri, K. Seiler, H. Z. Fan, C. S. Effenhauser, and A. Manz, "Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip", Science, vol. 261, issue 5123, pp. 895 - 897, 08/1993.
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined wiring board with integrated microinductor for chip-scale power conversion", IEEE Trans. Power Electron, vol. 29, no. 11, Nov. 2014.
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined thick-film copper power inductors and transformers for integrated power converters", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2010), Hilton Head, SC, pp. 455-458, 06/2010.
Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.
Lee, K., C. Kim, Y. Kim, J. Bang, B. Ahn, J. Kim, and Y.K. Yoon, "Microfluidic network-based combinatorial dilution device with an initial concentration controller", International Conference on Miniaturized Systems for Chemistry and Life Sciences , Groningen, The Netherlands, 09/2010.
Acosta, M. A., X. Jiang, P-K. Huang, K. B. Cutler, C. S. Grant, G. M. Walker, and M. P. Gamcsik, "A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia", Biomicrofluidics, vol. 8, issue 5, pp. 054117, 09/2014.
Kim, J., K. Lee, K. W. Oh, and Y.K. Yoon, "Microfabrication of rounded channel and waveguide integrated microlens using timed development and thermal reflow process", The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Jeju Island, Korea , 11/2009.
Velez, C., and D. P. Arnold, "Microfabrication of magnetically attached end effectors for micro/milli robots", Proc. 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS 2017), Montreal, Canda, 07/2017.