Publications
"Microelectromechanical inductors with high inductance density via mechanical energy storage", J. Micromech. Microeng., vol. 22, no. 9, pp. 11, 08/2012.
, "Microendoscopic Confocal Imaging Probe Based on an LVD Microlens Scanner", IEEE Journal of Selected Topics in Quantum Electronics, vol. 13, issue 2, pp. 228 - 234, 3/2007.
, "Microfabricated Electrodynamic Synthetic Jet Actuators", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 95 - 105, Nov-17-2017, 2018.
, "Microfabricated electrodynamic transformers for electromechanical power conversion", J. Micromech. Microeng., vol. 23, no. 11, pp. 10, 11/2013.
, "Microfabricated electrodynamic wireless power receiver for bio-implants and wearables", 2018 Digital Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, South Carolina, USASan Diego, Transducer Research Foundation, 2018.
, "Microfabricated Electro-Permanent Magnets Using AlNiCo and CoPt", IEEE Magnetics Letters, vol. 12, pp. 1 - 5, Jan-01-2021.
, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.
, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.
, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
, "Microfabrication and Assembly Processes for Integrating Microelectrode Arrays into Tissue-Engineered Scaffolds for Novel Nerve Interfaces", 64th American Vacuum Society Interna-tional Symposium and Exhibition, Tampa, FL, 2017.
, Microfabrication and Characterization of an Integrated 3-Axis CMOS-MEMS Accelerometer: IEEE, pp. 60 - 67, 2005.
, "Microfabrication and process integration of powder-based permanent magnets", Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.
, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.
, "Microfabrication of magnetically attached end effectors for micro/milli robots", Proc. 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS 2017), Montreal, Canda, 07/2017.
, "Microfabrication of rounded channel and waveguide integrated microlens using timed development and thermal reflow process", The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Jeju Island, Korea , 11/2009.
, "A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia", Biomicrofluidics, vol. 8, issue 5, pp. 054117, 09/2014.
, "Microfluidic network-based combinatorial dilution device with an initial concentration controller", International Conference on Miniaturized Systems for Chemistry and Life Sciences , Groningen, The Netherlands, 09/2010.
, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.
, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.
, "Micromachined thick-film copper power inductors and transformers for integrated power converters", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2010), Hilton Head, SC, pp. 455-458, 06/2010.
, "Micromachined wiring board with integrated microinductor for chip-scale power conversion", IEEE Trans. Power Electron, vol. 29, no. 11, Nov. 2014.
, "Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip", Science, vol. 261, issue 5123, pp. 895 - 897, 08/1993.
,