Publications

Found 250 results
Author Title Type [ Year(Desc)]
Filters: Author is Arnold, David P  [Clear All Filters]
2011
Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.
Cheng, S., R. D. Natarajan, and D. P. Arnold, "Experimental demonstration of an electrodynamic transformer", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4433-4436, 10/2011.
Yang, T-S., N. Wang, and D. P. Arnold, "Fabrication and characterization of parylene-bonded Nd–Fe–B powder micromagnets", J. Applied Physics, vol. 109, no. 071753, 3 pages, 04/2011.
Rao, Y., and D. P. Arnold, "Input-powered energy harvesting interface circuits with zero standby power", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1992-1999, 03/2011.
Rao, Y., and D. P. Arnold, "An input-powered vibrational energy harvesting interface circuit with zero standby power", IEEE Trans. Power Electron., vol. 46, no. 12, pp. 3524-3533, 12/2011.
Meyer, C. D., S. S. Bedair, L. Xue, C. M. Dougherty, R. Bashirullah, D. P. Arnold, and B. C. Morgan, "Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process", 220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.
Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductor with high inductance density via mechanical energy storage", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 181-184, 11/2011.
Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
Bowers, B., O. D. Oniku, and D. P. Arnold, "Microfabrication and process integration of powder-based permanent magnets", Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.
Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.
Yang, T-S., N. Wang, and D. P. Arnold, "Morphology and magnetic properties of electroplated Co-rich Co-Zn thin films", Microsystem Technologies, vol. 17, no. 1, pp. 85-91, 01/2011.
Cheng, S., and D. P. Arnold, "Optimization of Permanent Magnet Assemblies Using Genetic Algorithms", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4104-4107, 11/2011.
Cheng, S., and D. P. Arnold, "A resonant DC/AC inverter using an electromechanical device", PowerMEMS 2011, Seoul, Korea, 11/2011.
Xue, L., C. D. Meyer, D. P. Arnold, and R. Bashirullah, "Towards miniature step-up power converters for mobile microsystems", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1451-1455, 03/2011.
Cheng, S., R. Sathe, R. D. Natarajan, and D. P. Arnold, "A Voltage-Multiplying Self-Powered AC/DC Converter with 0.35 V Minimum Input Voltage for Energy Harvesting Applications", IEEE Transactions on Power Electronics, vol. 26, no. 9, pp. 2542-2549, 09/2011.
Cheng, S., R. Sathe, R. D. Natarajan, and D. P. Arnold, "A Voltage-Multiplying Self-Powered AC/DC Converter with 0.35 V Minimum Input Voltage for Energy Harvesting Applications", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1311-1318, 03/2011.
Challa, V. R., V. Divakar, J. Oscar Mur-Miranda, and D. P. Arnold, "Wireless power transmission to an electrodynamic energy harvester using low-frequency magnetic fields", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 335-338, 11/2011.
2012
Peterson, B., F. Herrault, O. D. Oniku, Z. A. Kaufman, and D. P. Arnold, "Assessment of laser-induced damage in laser-micromachined rare-earth permanent magnets", IEEE Trans. Magn., vol. 48, no. 11, 2012.
Sawant, S. G., I. Eskinazi, M. Sheplak, L. Cattafesta, and D. P. Arnold, "A comparative study of two methods for driving electrodynamic zero-net-mass-flux actuators", 6th AIAA Flow Control Conf., New Orleans, LA, AIAA, 06/2012.
Cheng, S., and D. P. Arnold, "Demonstration of a micromachined electrodynamic transformer and application in a resonant dc/ac power inverter", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Challa, V. R., D. P. Arnold, and J. Oscar Mur-Miranda, "Electrodynamic wireless power transmission using low-frequency fields", 2nd Int. Workshop Wireless Energy Transport and Harvesting, Leuven, Belgium, 05/2012.
Zhang, Y., and D. P. Arnold, "Electromechanical inductors with enhanced electrical inductance", Sensors & Actuators A. Physical, vol. 180, pp. 187-192, 06/2012.
Meloy, J., J. Sells, V. Chandrasekharan, J. Griffin, L. Cattafesta, D. P. Arnold, and M. Sheplak, "Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications", Hilton Head 2012, Hilton Head Island, SC, 06/2012.
Zito, J., R. Durscher, J. Soni, S. Roy, and D. P. Arnold, "Flow and force inducement using micron size dielectric barrier discharge actuators", Appl. Phys. Lett., vol. 100, 05/2012.