Publications
"A Surface Micromachined Capacitive Microphone for Aeroacoustic Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2008.
, "Surface and Bulk Micromachined Dual Back-Plate Condenser Microphone", 18th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2005), Miami, FL, January, 2005.
, "S/N Optimization and Noise Considerations for Piezoresistive Microphones", 16th International Conference on Noise in Physical Systems and 1/f Fluctuations, Gainesville, FL, World Scientific, pp. 549-552, October, 2001.
, "A Self-Powered Wireless Active Acoustic Liner", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
, "Scaling Relations for Piezoresistive Microphones", International Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2000.
, "Sapphire Sensors for High Temperature Applications", Florida Center for Advanced Aero-Propulsion Annual Technical Symposium, Tallahassee, FL, 08/2010.
, "A Sapphire Based Fiber Optic Dynamic Pressure Sensor for Harsh Environments: Fabrication and Characterization", 49th AIAA Aerospace Sciences Meeting, Orlando, FL, AIAA, 01/2011.
, "Robust Capon Beamformers for Wideband Acoustic Imaging", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3198, Hilton Head, SC, May, 2003.
, "Reduced Order Modeling for Low Reynolds Number Flow Control", Proceedings of SPIEs 6th Annual International Symposium on Smart Structures and Materials, Mathematics Modeling and Control Conference, vol. 3667, Newport Beach, CA, pp. 68-79, March, 1999.
, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
, "Piezoresistive Microphone Design Pareto Optimization: Tradeoff Between Sensitivity and Noise Floor", 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2003-1632, Norfolk, VA, April, 2003.
, "Picosecond Laser Ablation of Sapphire for High Temperature Sensor Fabrication", Technologies for Future Micro-Nano Manufacturing Workshop, Napa, CA, Transducers Research Foundation, 08/2011.
, "Phase relationships between velocity, wall pressure, and wall shear stress in a forced turbulent boundary layer", 46th AIAA Fluid Dynamics Conference, Washington, D.C.Reston, Virginia, American Institute of Aeronautics and Astronautics, 2016.
, "Passive Wireless Direct Shear Stress Measurement", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.
, "Optimization of Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0635, Reno, NV, January, 2003.
, "Optimization of an Electromechanical Helmholtz Resonator", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
, "Optical Miniaturization of a MEMS-Based Floating Element Shear Stress Sensor with Moir", 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-0498, 01/2010.
, "Optical Flow Sensor Using Geometric Moire Interferometry", 34th International Conference on Environmental Systems, SAE Paper 2004-01-2267, Colorado Springs, CO, July, 2004.
, "Nonlinear System Identification of a MEMS Dual-Backplate Capacitive Microphone by Harmonic Balance Method", 2005 ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2005-82880, Orlando, FL, November, 2005.
, "A Nonlinear Model for the Large Deflections and Buckling of Circular Composite Diaphragms", 2005 ASME International Mechanical Engineering Congress & Exposition, November, 2005.
, "Nonlinear Identification of a Capacitive Dual-Backplate MEMS Microphone", 2005 ASME International Design Engineering Technical Conferences, Paper DETC2005-84591, Long Beach, CA, September, 2005.
, "The Nonlinear Behavior of a Post-Buckled Circular Plate", 6th IEEE Conference on Sensors, October, 2007.
, "Noise Modeling and Characterization of Piezoresistive Transducers", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-15392, November, 2006.
, "Modern Skin Friction Measurement Techniques: Description, Use, and What to Do with the Data", 21st AIAA Advanced Measurement Technology and Ground Testing Conference, AIAA Paper 2000-2521, Denver, CO, June, 2000.
, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", 2009 ASME International Mechanical Engineering Congress, Lake Buena Vista, FL, November, 2009.
,