Publications
"Chip fabrication for combinatorial chemistry", Microstructures and Microfabricated Systems III, pp. 89-93, SEP, 1997.
, "A chip-sized piezoelectric receiver for low-frequency, near-field wireless power transfer: design, modeling and experimental validation", Smart Materials and Structures, vol. 30, issue 4, pp. 045011, Jan-04-2021.
, "Circulating Tumor Cell Isolation and Analysis", Advances in Clinical Chemistry , vol. 75: ELSEVIER, pp. 1-31, 2016.
, "Circumferential-scanning endoscopic optical coherence tomography probe based on a circular array of six 2-axis MEMS mirrors", Biomedical Optics Express, vol. 9, issue 5, pp. 2104, Jan-01-2018.
, "Clandestine nanoelectromechanical tags for identification and authentication", Microsystems & Nanoengineering, vol. 6, issue 1, Jan-12-2020.
, "A CMOS-MEMS Gyroscope Interface Circuit Design With High Gain and Low Temperature Dependence", IEEE Sensors Journal, vol. 11, issue 11, pp. 2740 - 2748, 11/2011.
, "A CMOS-MEMS Mirror with Curled-Hinge Comb Drives", Journal of Microelectromechanical Systems, vol. 12, issue 4, no. 4, pp. 450 - 457, 08/2003.
, "Coalescence and spreading of drops on liquid pools", Journal of Colloid and Interface Science, vol. 586, pp. 257 - 268, Jan-03-2021.
, "Cogenerating Synthetic Parts toward a Self-Replicating System", ACS Synthetic Biology, vol. 6, issue 7, pp. 1327 - 1336, Mar-23-2017.
, "Collection of Viable Aerosolized Influenza Virus and Other Respiratory Viruses in a Student Health Care Center through Water-Based Condensation Growth", mSphere, vol. 2, issue 5, pp. e00251-17, Oct-11-2017.
, "Common-path optical coherence tomography using a microelectromechanical-system-based endoscopic probe", Applied Optics, vol. 55, issue 25, pp. 6930, Jan-01-2016.
, "Compact and efficient generator for low grade solar and waste heat driven absorption systems", Applied Energy, vol. 198, pp. 173 - 179, Apr-28-2017.
, "A Compact Fourier Transform Spectrometer on a Silicon Optical Bench With an Electrothermal MEMS Mirror", Journal of Microelectromechanical Systems, vol. 25, no. 2, pp. 347-355, 04/2016.
, "A compact human-powered energy harvesting system", Energy Harvesting & Syst., vol. 1, no. 1-2, 01/ 2014.
, "Comparative Study of Two Methods for Driving Electrodynamic Zero-Net Mass-Flux Actuators", AIAA Journal, vol. 51, issue 9, pp. 2286 - 2290, 09/2013.
, "Comparison between high-field piezoresistive coefficients of Si metal-oxide-semiconductor field-effect transistors and bulk Si under uniaxial and biaxial stress", J. Appl. Phys., vol. 103, pp. 113704-1–113704-7, JUN, 2008.
, "Comparison of Microphone Array Processing Techniques for Aeroacoustic Measurements", International Journal of Aeroacoustics, vol. 9, no. 6, pp. 733-762, 2010.
, "Complementary-Switchable Dual-Mode SHF Scandium Aluminum Nitride BAW Resonator", IEEE Transactions on Electron Devices, pp. 1 - 8, Jan-01-2022.
, "Composite Circular Plates with Residual Tensile Stress Undergoing Large Deflections", Journal of Applied Mechanics, vol. 79, no. 2: ASME, 03/2012.
, "Comprehensive characterization and failure modes of tungsten microwire arrays in chronic neural implants", Journal of Neural Engineering, vol. 9, issue 5, no. 5, pp. 056015, 09/2012.
, "Computationally Efficient Approaches to Aeroacoustic Source Power Estimation", IEEE Signal Processing Letters, vol. 18, no. 1, pp. 11-14, 01/2011.
, "Computer numerical control (CNC) lithography: light-motion synchronized UV-LED lithography for 3D microfabrication", Journal of Micromechanics and Microengineering, vol. 26, issue 3, pp. 035003, Jan-03-2016.
, "Computer-controlled dynamic mode multidirectional UV lithography for 3D microfabrication", Journal of Micromechanics and Microengineering, vol. 21 (3), 2011.
, "Concentration and determination of cotinine in serum by cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography", ELECTROPHORESIS, vol. 33, issue 16, pp. 2570 - 2576, 08/2012.
, "Conductivity properties of carrier ampholyte pH gradients in isoelectric focusing", Electrophoresis, vol. 26, pp. 473-479, FEB, 2005.
,