Publications

Jia, K., S. Samuelson, and H. Xie, "High-Fill-Factor Micromirror Array With Hidden Bimorph Actuators and Tip–Tilt-Piston Capability", Journal of Microelectromechanical Systems, 2011.

Tang, H., G. J. Ehlert, Y. Lin, and H. A. Sodano, "Highly Efficient Synthesis of Graphene Nanocomposites", Nano Letters, vol. 12, no. 1, pp. 84-90, 11/2011.

Cheng, X., and Y.K. Yoon, "Hybrid Mode Radiation in Patch Antenna Loaded with Corrugated Electric Via Arrays", Antennas and Propagation Society International Symposium (APSURSI), 2011 IEEE, Spokane, WA, 06/2011.

Rao, Y., and D. P. Arnold, "Input-powered energy harvesting interface circuits with zero standby power", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1992-1999, 03/2011.

Rao, Y., and D. P. Arnold, "An input-powered vibrational energy harvesting interface circuit with zero standby power", IEEE Trans. Power Electron., vol. 46, no. 12, pp. 3524-3533, 12/2011.

Meyer, C. D., S. S. Bedair, L. Xue, C. M. Dougherty, R. Bashirullah, D. P. Arnold, and B. C. Morgan, "Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process", 220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.

Bahr, C., and L. Cattafesta, "Limits of Coherence-Based Aeroacoustic Analysis in the Presence of Distributed Sources", Journal of the Acoustical Society of America, vol. 129, no. 6, pp. EL248-EL253, 05/2011.

Sun, H., D. Fang, K. Jia, F. Maarouf, H. Qu, and H. Xie, "A Low-Power Low-Noise Dual-Chopper Amplifier for Capacitive CMOS-MEMS Accelerometers", IEEE Sensors Journal, vol. 11, issue 4, pp. 925 - 933, 04/2011.

Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Liu, L., S. Pal, and H. Xie, "MEMS Mirrors Based on Curved Concentric Electrothermal Actuators with Very Small Lateral Shift and Tilt", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.

Sun, J., and H. Xie, "MEMS-Based Endoscopic Optical Coherence Tomography", International Journal of Optics, vol. 2011, no. 825629, 2011.

Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductor with high inductance density via mechanical energy storage", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 181-184, 11/2011.

Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.

Bowers, B., O. D. Oniku, and D. P. Arnold, "Microfabrication and process integration of powder-based permanent magnets", Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.

Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.

Liu, L., L. Wu, J. Sun, E. Lin, and H. Xie, "Miniature endoscopic optical coherence tomography probe employing a two-axis microelectromechanical scanning mirror with through-silicon vias", Journal of Biomedical Optics, vol. 16, issue 2, pp. 026006, 2011.

Liao, W., W. Liu, L. Xi, J. Sun, Y. Zhu, L. Wu, H. Jiang, and H. Xie, "Miniature Photoacoustic Imaging Probe Using MEMS Scanning Micromirror", IEEE Optical MEMS and Nanophotonics, Istanbul, Turkey, 08/2011.

Griffin, B. A., V. Chandrasekaran, M. D. Williams, B. V. Sankar, and M. Sheplak, "Model for thermoelastic actuation of an axisymmetric isotropic circular plate via an internal harmonic heat source", International Journal of Solids and Structures, 02/2011.

Yang, T-S., N. Wang, and D. P. Arnold, "Morphology and magnetic properties of electroplated Co-rich Co-Zn thin films", Microsystem Technologies, vol. 17, no. 1, pp. 85-91, 01/2011.

Choi, S., Y.K. Yoon, S-H. Kim, and M. G. Allen, "Nonlinear sensitivity enhancement of resonant microsensors and its application to low power magnetic sensing", Journal of Micromechanics and Microengineering, vol. 21, 2011.

Lee, S.J., J. Sun, J. Flint, S. Guo, H. Xie, M. King, and M. Sarntinoranont, "Optically based-indentation technique for acute rat brain tissue slices and thin biomaterials", Journal of Biomedical Materials Research: Part B - Applied Biomaterials, vol. 97B, no. 1,, 2011.

Cheng, S., and D. P. Arnold, "Optimization of Permanent Magnet Assemblies Using Genetic Algorithms", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4104-4107, 11/2011.

Palavicini, M., B. George, and L. Cattafesta, "Passive Flow Control over a Three-Dimensional Turret with a Flat Aperture", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, AIAA, 07/2011.

Blood, D., D. Mills, M. Sheplak, and T. Schmitz, "Picosecond Laser Ablation of Sapphire for High Temperature Sensor Fabrication", Technologies for Future Micro-Nano Manufacturing Workshop, Napa, CA, Transducers Research Foundation, 08/2011.