Publications
"Chemical-Assisted Bonding of Thermoplastics/Elastomer for Fabricating Microfluidic Valves", Analytical Chemistry, vol. 83, issue 1, pp. 446 - 452, 01/2011.
, "A CMOS-MEMS Gyroscope Interface Circuit Design With High Gain and Low Temperature Dependence", IEEE Sensors Journal, vol. 11, issue 11, pp. 2740 - 2748, 11/2011.
, "Compact 3D Integrable SU8 Embedded Microwave Bandpass Filters using Complementary Split Ring Resonator Loaded Half Mode Substate Integrated Waveguide", Electronic Components and Technology Conference ECTC 2011, Lake Buena Vista, FL, June 2011.
, "Compact Self-Packaged Active Folded Patch Antenna with Omni-directional Radiation Pattern", Electronic Components and Technology Conference (ECTC, Lake Buena Vista, Florida , 06/2011.
, "A Compact Self-Packaged Patch Antenna Folded inRegtangular Waveguide Shape", Antennas and Propagation Society International Symposium (APSURSI), 2011 IEEE, Spokane, WA, 06/2011.
, "A Compact Self-packaged Patch Antenna with Non-Planar Complimentary Split Ring Resonator Loading", Antennas and Propagation Society International Symposium (APSURSI), 2011 IEEE, Spokane, WA, 06/2011.
, "Computationally Efficient Approaches to Aeroacoustic Source Power Estimation", IEEE Signal Processing Letters, vol. 18, no. 1, pp. 11-14, 01/2011.
, "Computer-controlled dynamic mode multidirectional UV lithography for 3D microfabrication", Journal of Micromechanics and Microengineering, vol. 21 (3), 2011.
, "Corrosion of tungsten microelectrodes used in neural recording applications", J. Neuroscience Methods, vol. 198, pp. 14, 06/2011.
, "Corrugated Substrate Integrated Waveguide with Dual Band non-Bragg Resonance", IEEE International Microwave Symposium (IMS 2011) , Baltimore, Maryland, 07/2011.
, "Coupling Biotic and Abiotic Metrics to Create a Testbed for Predicting Neural Electrode Performance", 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC'11) August 30 - September 3, 2011, Boston, MA, 08/2011.
, "Critical Discussion on (100) and (110) Orientation Dependent Transport: nMOS Planar and FinFET", Symposium on VLSI Technology, Kyoto, Japan, 2011.
, "A Curved Multimorph Based Electrothermal Micromirror with Large Scan Range and Low Drive Voltage", Sensors & Actuators: A. Physical, vol. 170, pp. pp. 156-163, 2011.
, "Design and Fabrication of 2D Fast Electrothermal Micromirrors with Large Scan Range and Small Center Shift", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.
, "Design Optimization and Implementation of a Miniature Optical Coherence Tomography Probe Based on a MEMS Mirror", the 4th International Symposium on Photoelectronic Detection and Imaging (ISPDI 2011), Beijing, China, May 24- 26, 2011.
, "Development of a fluorescent method for detecting the onset of coagulation in human plasma on microstructured lateral flow platforms", The Analyst, vol. 136, issue 9, pp. 1816, 2011.
, "Dispense and self planarization process on a modified surface for multiple height 3-D microfabrication", The 16th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers’11), Beijing, China, 06/2011.
, "Electrically Small Tunable Split Ring Resonator Antenna ", 2010 IEEE AP-S International Symposium on Antennas and Propagation, Toronto Canada, 07/2011.
, "Evaluation of Optical Fiber Positioning using Silicon V-Grooves", 39th North American Manufacturing Research Conference, Corvallis, OR, 2011.
, "Experimental demonstration of an electrodynamic transformer", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4433-4436, 10/2011.
, "Experimental Study of Adaptive Control of High-Speed Flow-Induced Cavity Oscillations", Journal of Fluid Science and Technology, vol. 6, no. 5, pp. 701-716, 07/2011.
, "Experimental Verification of a MEMS Based Skin Friction Sensor for Quantitative Wall Shear Stress Measurement", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, 06/2011.
, "Fabrication and characterization of parylene-bonded Nd–Fe–B powder micromagnets", J. Applied Physics, vol. 109, no. 071753, 3 pages, 04/2011.
, "Fabrication of Nanoporous membrane and its non-lithographic patterning using Electrospinning and Stamp-thru-Mold (ESTM)", IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011), Cancun, Mexico, 01/2011.
, "Fabrication optimization of a miniaturized array device for cell-free protein synthesis", ELECTROPHORESIS, vol. 32, issue 22, pp. 3101 - 3107, 11/2011.
,