Publications

Chung, J., and S. Moghaddam, "Molecular Dynamics Simulation of Phases Interactions in Membrane-based Absorption and Desorption Processes", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.

Pal, S., S. Samuelson, and H. Xie, "Novel mechanisms for millimeter range piston actuation of vertical micromirrors and microlenses", International Conference on Optical MEMS and Nanophotonics, Banff, Alberta, Canada, 2012.

Yu, D., J. Chung, and S. Moghaddam, "Parametric study of water vapor absorption into a constrained thin film of lithium bromide solution", International Journal of Heat and Mass Transfer, vol. 55, issue 21-22, pp. 5687 - 5695, Jan-10-2012.

Paprotny, I., A. Waterbury, V. R. Challa, Q. Xu, D. P. Arnold, S. Sanders, and P. K. Wright, "Piezoelectrodynamic gyrator: analysis, experiments, and applications to wireless power transfer", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Prasad, A., Q-S. Xue, V. Sankar, T. Nishida, G. Shaw, W. J. Streit, and J. C. Sanchez, "Predicting Microelectrode Array Functionality Using Biotic and Abiotic Metrics in Vivo", 34th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, San Diego, CA, Aug 28-Sep 1, 2012.

Dieme, R., J. Zhang, N. G. Rudawski, K. Jones, G. Bosman, M. Sheplak, and T. Nishida, "Process Dependence of 1/f Noise and Defects in Ion Implanted p-Type Piezoresistors", Journal of Applied Physics, vol. 112, 2012.

Phipps, A., and T. Nishida, "System Modeling of Piezoelectric Energy Harvesters", IEEE Trans. Power Electronics, vol. 27, issue 2, 2012.

Griffin, B. A., V. Chandrasekaran, and M. Sheplak, "Thermoelastically Actuated Acoustic Proximity Sensor with Integrated Through-Silicon Vias", Journal of Microelectromechanical Systems, vol. 21, no. 2, 04/2012.

Liu, L., and H. Xie, "Three-dimensional confocal scanning microscope using an MEMS mirror for lateral scan and an MEMS lens scanner for depth scan", Optical MEMS and Nanophotonics (OMN), 2012 International Conference on, pp. 158-159, Aug, 2012.

Streit, W. J., Q-S. Xue, A. Prasad, V. Sankar, E. Knott, A. T. Dyer, J. R. Reynolds, T. Nishida, G. Shaw, and J. C. Sanchez, "Tissue, Electrical, and Material Responses in Electrode Failure", IEEE Pulse, vol. 3, issue 1, pp. 30 - 33, 01/2012.

Yang, S., F. Liu, M. Oyarzun, M. Palavicini, and L. Cattafesta, "Transfer Matrix Modeling of Synthetic Jet Actuators", Fluid Science and Technology, vol. 8, no. 2, 07/2012.

Yang, S., F. Liu, M. Oyarzun, M. Palavicini, and L. Cattafesta, "Transfer Matrix Modeling of Synthetic Jet Actuators", Fluid Science and Technology, vol. 8, no. 2, 07/2012.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Ultra-miniaturized power converter modules using micromachined copper scaffolds", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Bernard, B. P., J. W. Peyser, B. Mann, and D. P. Arnold, "Using the mass ratio to induce band gaps in a 1D array of nonlinearly coupled oscillators", Proc. ASME 2012 Int. Design Engineering Tech. Conf. & Computers and Information in Eng. Conf. (IDETC/CIE 2012), Chicago, IL, ASME, 08/2012.

Li, J., K. D. T. Ngo, G-Q. Lu, and H. Xie, "Wafer-level fabrication of high-power-density MEMS passives based on silicon molding technique", Integrated Power Electronics Systems (CIPS), 2012 7th International Conference on, pp. 1-5, March, 2012.

Li, J., K. D. T. Ngo, G-Q. Lu, and H. Xie, "Wafer-level fabrication of high-power-density MEMS passives based on silicon molding technique", Integrated Power Electronics Systems (CIPS), 2012 7th International Conference on, pp. 1-5, March, 2012.

Challa, V. R., J. Oscar Mur-Miranda, and D. P. Arnold, "Wireless power transmission to an electromechanical receiver using low-frequency magnetic fields", Smart Materials and Structures, vol. 21, issue 11, pp. 115017, 11/2012.

Wu, L., S. Samuelson, J. Sun, K. Jia, W. Lau, S. Choe, B. S. Sorg, and H. Xie, "A 2.8-mm imaging probe based on a high-fill-factor mems mirror and wire-bonding-free packaging for endoscopic optical coherence tomography", IEEE MEMS 2011, Cancun, Mexico, 2011.

Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "An active voltage doubling ac/dc converter for low-voltage energy harvesting applications", IEEE Transactions on Power Electronics, vol. 26, no. 8, pp. 2258-2265, 08/2011.

Cattafesta, L., and M. Sheplak, "Actuators for Active Flow Control", Annual Review of Fluid Mechanics, vol. 43, no. 1, pp. 247–272, 2011.

Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.

Bahr, C., J. Li, and L. Cattafesta, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Griffin, B. A., M. D. Williams, C. S. Coffman, and M. Sheplak, "Aluminum Nitride Ultrasonic Air-Coupled Actuator ", Journal of Microelectromechanical Systems, vol. 20, no. 2, pp. 476-486, 04/2011.

Pal, S., and H. Xie, "Analysis, simulation and fabrication of curved multimorphs that undergo bending and twisting", Sensors, 2011 IEEE, pp. 667-670, Oct, 2011.

Benard, N., L. Cattafesta, E. Moreau, J. Griffin, and J-P. Bonnet, "On the benefits of hysteresis effects for closed-loop separation control using plasma actuation", Physics of Fluids, vol. 23, issue 8, pp. 083601, 2011.