Found 1228 results
Author Title Type [ Year(Desc)]
Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Liu, L., S. Pal, and H. Xie, "MEMS Mirrors Based on Curved Concentric Electrothermal Actuators with Very Small Lateral Shift and Tilt", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.
Sun, J., and H. Xie, "MEMS-Based Endoscopic Optical Coherence Tomography", International Journal of Optics, vol. 2011, no. 825629, 2011.
Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductor with high inductance density via mechanical energy storage", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 181-184, 11/2011.
Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
Bowers, B., O. D. Oniku, and D. P. Arnold, "Microfabrication and process integration of powder-based permanent magnets", Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.
Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.
Liu, L., L. Wu, J. Sun, E. Lin, and H. Xie, "Miniature endoscopic optical coherence tomography probe employing a two-axis microelectromechanical scanning mirror with through-silicon vias", Journal of Biomedical Optics, vol. 16, issue 2, pp. 026006, 2011.
Liao, W., W. Liu, L. Xi, J. Sun, Y. Zhu, L. Wu, H. Jiang, and H. Xie, "Miniature Photoacoustic Imaging Probe Using MEMS Scanning Micromirror", IEEE Optical MEMS and Nanophotonics, Istanbul, Turkey, 08/2011.
Griffin, B. A., V. Chandrasekaran, M. D. Williams, B. V. Sankar, and M. Sheplak, "Model for thermoelastic actuation of an axisymmetric isotropic circular plate via an internal harmonic heat source", International Journal of Solids and Structures, 02/2011.
Yang, T-S., N. Wang, and D. P. Arnold, "Morphology and magnetic properties of electroplated Co-rich Co-Zn thin films", Microsystem Technologies, vol. 17, no. 1, pp. 85-91, 01/2011.
Choi, S., Y.K. Yoon, S-H. Kim, and M. G. Allen, "Nonlinear sensitivity enhancement of resonant microsensors and its application to low power magnetic sensing", Journal of Micromechanics and Microengineering, vol. 21, 2011.
Lee, S.J., J. Sun, J. Flint, S. Guo, H. Xie, M. King, and M. Sarntinoranont, "Optically based-indentation technique for acute rat brain tissue slices and thin biomaterials", Journal of Biomedical Materials Research: Part B - Applied Biomaterials, vol. 97B, no. 1,, 2011.
Cheng, S., and D. P. Arnold, "Optimization of Permanent Magnet Assemblies Using Genetic Algorithms", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4104-4107, 11/2011.
Palavicini, M., B. George, and L. Cattafesta, "Passive Flow Control over a Three-Dimensional Turret with a Flat Aperture", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, AIAA, 07/2011.
Blood, D., D. Mills, M. Sheplak, and T. Schmitz, "Picosecond Laser Ablation of Sapphire for High Temperature Sensor Fabrication", Technologies for Future Micro-Nano Manufacturing Workshop, Napa, CA, Transducers Research Foundation, 08/2011.
Zhu, Y., W. Liu, K. Jia, W. Liao, and H. Xie, "A piezoelectric unimorph actuator based tip-tilt-piston micromirror with high fill factor and small tilt and lateral shift", Sensors and Actuators A: Physical, vol. 167, issue 2, no. 6, pp. 495 - 501, 6/2011.
Takahashi, H., F. Liu, M. Palavicini, M. Oyarzun, J. Griffin, L. Ukeiley, and L. Cattafesta, "Progress on Active Control of Open Cavities", 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, AIAA, 01/2011.
Cheng, X., PF. Jao, D. Senior, and Y.K. Yoon, "Reconfigurable Split Ring Resonator Array Loaded Waveguide for in-situ Tuning", Antennas and Propagation Society International Symposium (APSURSI), 2011 IEEE, Spokane, WA, 06/2011.
Cheng, X., and Y.K. Yoon, "Rectangular Waveguide Shape Folded Patch Antenna", 2010 IEEE AP-S International Symposium on Antennas and Propagation, 2011.
Cheng, S., and D. P. Arnold, "A resonant DC/AC inverter using an electromechanical device", PowerMEMS 2011, Seoul, Korea, 11/2011.
Griffin, B. A., D. Mills, T. Schmitz, and M. Sheplak, "A Sapphire Based Fiber Optic Dynamic Pressure Sensor for Harsh Environments: Fabrication and Characterization", 49th AIAA Aerospace Sciences Meeting, Orlando, FL, AIAA, 01/2011.
Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear layer time-delay correction using a non-intrusive acoustic point source", International Journal of Aeroacoustics, vol. 10, no. 5 & 6, pp. 497-530, 9/2011.
Teh, S-Y., R. Khnouf, H. Fan, and A. P. Lee, "Stable, biocompatible lipid vesicle generation by solvent extraction-based droplet microfluidics", Biomicrofluidics, vol. 5, issue 4, pp. 044113, 2011.