Publications

Baykan, M., S. Thompson, and T. Nishida, "Strain effects on three-dimensional, two-dimensional, and one-dimensional silicon logic devices: Predicting the future of strained silicon", Journal of Applied Physics, vol. 108, no. 9, pp. 093716-24, 11/2010.

Ok, I., K. Akarvardar, S. Lin, M. Baykan, C.D. Young, P.Y. Hung, M.P. Rodgers, S. Bennett, H.O. Stamper, D.L. Franca, et al., "Strained SiGe and Si FinFETs for High Performance Logic with SiGe/Si Stack on SOI", International Electron Devices Meeting, San Francisco, CA, IEEE, 2010.

Cheng, S., and D. P. Arnold, "A study of a multi-pole magnetic generator for low-frequency vibrational energy harvesting", J. Micromech. Microeng., vol. 20, no. 2, pp. 025015, 02/2010.

Wang, M., J. Li, K. Ngo, and H. Xie, "A Surface Mountable Micro-Fabricated Power Inductor in Silicon for Ultra-Compact Power Supplies", IEEE Transactions on Power Electronics, 2010.

Wu, L., S. Dooley, E. A. Watson, P. F. McManamon, and H. Xie, "A Tip-Tilt-Piston Micromirror Array for Optical Phased Array Applications", Journal of Microelectromechanical Systems, 2010.

Aram, E., R. Mittal, J. Griffin, and L. Cattafesta, "Towards Effective ZNMF Jet Based Control of a Canonical Separated Flow", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.

Siauw, W. Long, J-P. Bonnet, J. Tensi, L. Cordier, B. Noack, and L. Cattafesta, "Transient dynamics of the flow around a NACA 0015 airfoil using fluidic vortex generators ", International Journal of Heat and Fluid Flow, vol. 31, issue 3, pp. 450-459, 06/2010.

Yardibi, T., C. Bahr, N. Zawodny, F. Liu, L. Cattafesta, and J. Li, "Uncertainty Analysis of the Standard Delay-and-Sum Beamformer and Array Calibration", Journal of Sound and Vibration, vol. 329, no. 13, pp. 2654-2682, 06/2010.

Cheng, S., and D. P. Arnold, "Wireless power transmission via magnetic coupling to an electrodynamic receiver", 10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 61-64, 12/2010.

Wu, L., S. Samuelson, J. Sun, K. Jia, W. Lau, S. Choe, B. S. Sorg, and H. Xie, "A 2.8-mm imaging probe based on a high-fill-factor mems mirror and wire-bonding-free packaging for endoscopic optical coherence tomography", IEEE MEMS 2011, Cancun, Mexico, 2011.

Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "An active voltage doubling ac/dc converter for low-voltage energy harvesting applications", IEEE Transactions on Power Electronics, vol. 26, no. 8, pp. 2258-2265, 08/2011.

Cattafesta, L., and M. Sheplak, "Actuators for Active Flow Control", Annual Review of Fluid Mechanics, vol. 43, no. 1, pp. 247–272, 2011.

Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.

Bahr, C., J. Li, and L. Cattafesta, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Griffin, B. A., M. D. Williams, C. S. Coffman, and M. Sheplak, "Aluminum Nitride Ultrasonic Air-Coupled Actuator ", Journal of Microelectromechanical Systems, vol. 20, no. 2, pp. 476-486, 04/2011.

Pal, S., and H. Xie, "Analysis, simulation and fabrication of curved multimorphs that undergo bending and twisting", Sensors, 2011 IEEE, pp. 667-670, Oct, 2011.

Benard, N., L. Cattafesta, E. Moreau, J. Griffin, and J-P. Bonnet, "On the benefits of hysteresis effects for closed-loop separation control using plasma actuation", Physics of Fluids, vol. 23, issue 8, pp. 083601, 2011.

Gu, P., K. Liu, H. Chen, T. Nishida, and H. Z. Fan, "Chemical-Assisted Bonding of Thermoplastics/Elastomer for Fabricating Microfluidic Valves", Analytical Chemistry, vol. 83, issue 1, pp. 446 - 452, 01/2011.

Sun, H., K. Jia, X. Liu, G. Zhen Yan, Y-W. Hsu, R. M. Fox, and H. Xie, "A CMOS-MEMS Gyroscope Interface Circuit Design With High Gain and Low Temperature Dependence", IEEE Sensors Journal, vol. 11, issue 11, pp. 2740 - 2748, 11/2011.

Senior, D., X. Cheng, PF. Jao, C. Kim, and Y.K. Yoon, "Compact 3D Integrable SU8 Embedded Microwave Bandpass Filters using Complementary Split Ring Resonator Loaded Half Mode Substate Integrated Waveguide", Electronic Components and Technology Conference ECTC 2011, Lake Buena Vista, FL, June 2011.

Cheng, X., C. Kim, J. Kim, D. Senior, and Y.K. Yoon, "Compact Self-Packaged Active Folded Patch Antenna with Omni-directional Radiation Pattern", Electronic Components and Technology Conference (ECTC, Lake Buena Vista, Florida , 06/2011.

Cheng, X., C. Kim, D. Senior, and Y.K. Yoon, "A Compact Self-Packaged Patch Antenna Folded inRegtangular Waveguide Shape", Antennas and Propagation Society International Symposium (APSURSI), 2011 IEEE, Spokane, WA, 06/2011.

Cheng, X., D. Senior, C. Kim, and Y.K. Yoon, "A Compact Self-packaged Patch Antenna with Non-Planar Complimentary Split Ring Resonator Loading", Antennas and Propagation Society International Symposium (APSURSI), 2011 IEEE, Spokane, WA, 06/2011.

Du, L., P. Stoica, J. Li, and L. Cattafesta, "Computationally Efficient Approaches to Aeroacoustic Source Power Estimation", IEEE Signal Processing Letters, vol. 18, no. 1, pp. 11-14, 01/2011.

Kim, J., M. G. Allen, and Y.K. Yoon, "Computer-controlled dynamic mode multidirectional UV lithography for 3D microfabrication", Journal of Micromechanics and Microengineering, vol. 21 (3), 2011.