Publications

Pal, S., and H. Xie, "Design and Fabrication of 2D Fast Electrothermal Micromirrors with Large Scan Range and Small Center Shift", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.

Pal, S., and H. Xie, "Analysis and Simulation of Curved Bimorph Microactuators", Microtech Conference and Expo (Nanotech 2010 vol. 2), Anaheim, CA, NSTI, 2010.

Pal, S., and H. Xie, "Distributed and lumped element models for a bimorph-actuated micromirror", Journal of Micromechanics and Microengineering, vol. 20, no. 4, pp. 045020, 2010.

Pal, S., and A. Ghosh, "Optimal actuation of micro-cantilevers by laser radiation pressure", IEE Electronics Letters, vol. 42, no. 10, pp. 580-581, MAY, 2006.

Pal, S., K. Jia, and H. Xie, "An Electrothermal Micromirror with High Linear Scanning Efficiency", LEOS 2007, Lake Buena Vista, FL, October, 2007.

Pabon, R. J., L. Ukeiley, M. Sheplak, and C. Barnard Keane, "Characteristics of turbulent boundary layer large scale motions using direct fluctuating wall shear stress measurements", Physical Review Fluids, vol. 3, issue 11, Jan-11-2018.

Pabon, R., C. Barnard, L. Ukeiley, and M. Sheplak, "Spatio-temporal characteristics of large scale motions in a turbulent boundary layer from direct wall shear stress measurement", Bulletin of the American Physical Society, 69th Annual Meeting of the APS Division of Fluid Dynamics, 2016.

Pabon, R., D. A. Mills, L. S. Ukeiley, and M. Sheplak, "Convection of wall shear stress events in a turbulent boundary layer", 70th APS Division of Fluid Dynamics, Denver, CO, 2017.

Oyarzun, M., and L. Cattafesta, "Design and Optimization of Piezoceramic Zero-Net Mass-Flux Actuators", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 07/2010.

Oxley, T. J., N. L. Opie, S. E. John, G. S. Rind, S. M. Ronayne, T. L. Wheeler, J. W. Judy, A. J. McDonald, A. Dornom, T. J. H. Lovell, et al., "Minimally invasive endovascular stent-electrode array for high-fidelity, chronic recordings of cortical neural activity", Nature Biotechnology, vol. 34, issue 3, pp. 320 - 327, Aug-02-2016.

Oniku, O. D., B. Bowers, S. B. Shetye, N. Wang, and D. P. Arnold, "Permanent magnet microstructures using dry-pressed magnetic powders", Journal of Micromechanics and Microengineering, vol. 23, issue 7, pp. 075027, 07/2013.

Oniku, O. D., B. Qi, and D. P. Arnold, "Electroplated L10 CoPt thick-film permanent magnets", J. Appl. Phys., vol. 115, pp. 17E521, 02/2014.

Oniku, O. D., A. Garraud, E. Shorman, W. C. Patterson, and D. P. Arnold, "Modeling of a micromagnetic imprinting process", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 187-190, 06/2014.

Oniku, O. D., B. Qi, and D. P. Arnold, "Electroplated thick-film cobalt platinum permanent magnets", Journal of Magnetism and Magnetic Materials, vol. 416, pp. 417 - 428, Jan-10-2016.

Oniku, O. D., and D. P. Arnold, "Mitigation of interfacial silicide reactions for electroplated CoPt films on Si substrates", Journal of Physics: Conference Series, vol. 660, no. 1, pp. 012140, 2015.

Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.

Oniku, O. D., R. Regojo, Z. A. Kaufman, W. C. Patterson, and D. P. Arnold, "Batch patterning of sub-millimeter features in hard magnetic films using pulsed magnetic fields and soft magnetizing heads", IEEE Trans. on Magn., vol. 49, no. 7, 07/2013.

Oniku, O. D., and D. P. Arnold, "High-energy-density permanent micromagnets formed from heterogeneous magnetic powder mixtures", 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), Paris, France, IEEE, pp. 436 - 439, 2012.

Oniku, O. D., P. V. Ryiz, A. Garraud, and D. P. Arnold, "Imprinting of fine-scale magnetic patterns in electroplated hard magnetic films using magnetic foil masks", Journal of Applied Physics, vol. 115, issue 17, pp. 17A718, 05/2014.

Oniku, O. D., B. Qi, and D. P. Arnold, "Effect of current density on electroplated CoPt thick films", TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, USA, IEEE, pp. 596 - 601, 2015.

Oniku, O. D., B. Qi, and D. P. Arnold, "Electroplated thick-film cobalt platinum permanent magnets", Journal of Magnetism and Magnetic Materials, 5/2016.

Ok, I., K. Akarvardar, S. Lin, M. Baykan, C.D. Young, P.Y. Hung, M.P. Rodgers, S. Bennett, H.O. Stamper, D.L. Franca, et al., "Strained SiGe and Si FinFETs for High Performance Logic with SiGe/Si Stack on SOI", International Electron Devices Meeting, San Francisco, CA, IEEE, 2010.

Nunamaker, E. A., B. S. Spearman, J. B. Graham, E. W. Atkinson, V. H. Desai, C. S. Shafor, S. Natt, R. A. Wachs, C. E. Schmidt, J. W. Judy, et al., "Implantation methodology development for tissue-engineered-electronic-neural-interface (TEENI) devices", 2017 8th International IEEE/EMBS Conference on Neural Engineering (NER), Shanghai, China, IEEE, 2017.

Nishida, T., "TSensors Vision: Enabling Sustainable Solutions for the Global Environment through Novel Sensing", MEMS & Sensors Executive Congress, 2016.

Nishida, T., "BiMOS and SMOSC structures for MOS parameter measurement", Solid-State Electronics, vol. 35, pp. 357-369, MAR, 1992.