Publications

Found 161 results
Author Title [ Type(Desc)] Year
Filters: Author is Lou Cattafesta  [Clear All Filters]
Conference Paper
Utturkar, Y., R. Holman, R. Mittal, B. Carroll, M. Sheplak, and L. Cattafesta, "A Jet Formation Criterion for Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0636, Reno, NV, January, 2003.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.
Gallas, Q., R. Holman, R. Raju, R. Mittal, M. Sheplak, and L. Cattafesta, "Low Dimensional Modeling of Zero-Net Mass Flux Actuators", 2nd AIAA Flow Control Conference, AIAA Paper 2004-2413, Portland, OR, June, 2004.
V.S., A. Kasyap, A. Phipps, M. Sheplak, K. Ngo, T. Nishida, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric Beams for Vibrational Energy Reclamation", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-, November, 2006.
Gallas, Q., J. Mathew, A. Kasyap V.S., R. Holman, T. Nishida, B. Carroll, M. Sheplak, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0125, Reno, NV, January, 2002.
Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Tuzzo, S., D. Martin, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS-Based Sound Intensity Probe", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3260, Hilton Head, SC, May, 2003.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
Song, Q., Y. Tian, and L. Cattafesta, "MIMO Feedback Control of Flow Separation", 45th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2007-0109, Reno, NV, January, 2007.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.
Cattafesta, L., J. Mathew, and A. Kurdila, "Modeling and Design of Piezoelectric Actuators for Fluid Control", World Aviation Conference, San Diego, CA, October, 2000.
Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
Arunajatesan, S., M. Oyarzun, M. Palavicini, and L. Cattafesta, "Modeling of Zero-Net Mass-Flux Actuators for Feedback Flow Control", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0743, January, 2009.
Liu, J., D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Nonlinear System Identification of a MEMS Dual-Backplate Capacitive Microphone by Harmonic Balance Method", 2005 ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2005-82880, Orlando, FL, November, 2005.
Mittal, R., R. B. Kotapati, and L. Cattafesta, "Numerical Study of Resonant Interactions and Flow Control in a Canonical Seperated Flow", AIAA 43rd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2005-1261, Reno, NV, December, 2005.
Horowitz, S., T-A. Chen, L. Cattafesta, M. Sheplak, T. Nishida, and V. Chandrasekaran, "Optical Flow Sensor Using Geometric Moire Interferometry", 34th International Conference on Environmental Systems, SAE Paper 2004-01-2267, Colorado Springs, CO, July, 2004.
Liu, F., S. Horowitz, L. Cattafesta, and M. Sheplak, "Optimization of an Electromechanical Helmholtz Resonator", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
Gallas, Q., G. Wang, M. Papila, M. Sheplak, and L. Cattafesta, "Optimization of Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0635, Reno, NV, January, 2003.