Publications

Found 167 results
Author [ Title(Asc)] Type Year
Filters: Author is Sheplak, Mark  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
N
Liu, J., D. Martin, K. Kadirvel, T. Nishida, M. Sheplak, and B. Mann, "Nonlinear Identification of a Capacitive Dual-Backplate MEMS Microphone", 2005 ASME International Design Engineering Technical Conferences, Paper DETC2005-84591, Long Beach, CA, September, 2005.
Williams, M. D., B. A. Griffin, B. Homeijer, B. V. Sankar, and M. Sheplak, "The Nonlinear Behavior of a Post-Buckled Circular Plate", 6th IEEE Conference on Sensors, October, 2007.
Nishida, T., R. Dieme, M. Sheplak, and G. Bosman, "Noise Modeling and Characterization of Piezoresistive Transducers", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-15392, November, 2006.
M
Liu, F., S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, "A multiple degree of freedom electromechanical Helmholtz resonator", J. Acoust. Soc. Am., vol. 122, no. 1, pp. 291-301, JUL, 2007.
Guo, B., J. Li, H. Zmuda, and M. Sheplak, "Multifrequency Microwave-Induced Thermal Acoustic Imaging for Breast Cancer Detection", IEEE Trans. Bio. Eng., vol. 54, no. 11, pp. 2000-2010, NOV, 2007.
Li, X., R. Wu, M. Sheplak, and J. Li, "Multi-Frequency CW-Based Time Delay Estimation for Proximity Ultrasonic Sensors", IEE Proceedings: Radar, Sonar, and Navigation, vol. 149, no. 02, pp. 53-59, JUL, 2002.
Naughton, J., and M. Sheplak, "Modern Skin Friction Measurement Techniques: Description, Use, and What to Do with the Data", 21st AIAA Advanced Measurement Technology and Ground Testing Conference, AIAA Paper 2000-2521, Denver, CO, June, 2000.
Naughton, J., and M. Sheplak, "Modern Developments in Shear Stress Measurement", Progress in Aerospace Sciences, vol. 38, pp. 515-570, JUL, 2002.
Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", 2009 ASME International Mechanical Engineering Congress, Lake Buena Vista, FL, November, 2009.
Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", Journal of Applied Mechanics, vol. 79, no. 1, 01/2012.
Sawant, S. G., M. Oyarzun, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Modeling of electrodynamic zero-net mass-flux actuators", AIAA Journal, vol. 50, no. 6, 06/2012.
Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
Griffin, B. A., V. Chandrasekaran, M. D. Williams, B. V. Sankar, and M. Sheplak, "Model for thermoelastic actuation of an axisymmetric isotropic circular plate via an internal harmonic heat source", International Journal of Solids and Structures, 02/2011.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
Appukuttan, A., W. Shyy, M. Sheplak, and L. Cattafesta, "Mixed Convection Induced by MEMS-Based Thermal Shear Stress Sensors", Numerical Heat Transfer-A, vol. 43, no. 3, pp. 283-305, JUL, 2003.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.
Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.
Tuzzo, S., D. Martin, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS-Based Sound Intensity Probe", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3260, Hilton Head, SC, May, 2003.