Publications

Cassano, C. L., and K. Mawatari, "Thermal lens microscopy as a detector in microdevices", ELECTROPHORESIS, vol. 35, issue 16, pp. 2279 - 2291, 08/2014.

Horowitz, S., A. Kasyap V.S., F. Liu, D. Johnson, T. Nishida, K. Ngo, M. Sheplak, and L. Cattafesta, "Technology Development for Self-Powered Sensors", 1st AIAA Flow Control Conference, AIAA Paper 2002-2702, St. Louis, MO, June, 2002.

Taylor, R., F. Liu, S. Horowitz, K. Ngo, T. Nishida, L. Cattafesta, and M. Sheplak, "Technology Development for Electromechanical Acoustic Liners", Active 04 Paper a04-093, Williamsburg, VA, September, 2004.

Cheng, S., and D. P. Arnold, "A study of a multi-pole magnetic generator for low-frequency vibrational energy harvesting", J. Micromech. Microeng., vol. 20, no. 2, pp. 025015, 02/2010.

Sanchez, J. C., N. Alba, T. Nishida, C. Batich, and P. Carney, "Structural Modifications in Chronic Microwire Electrodes for Cortical Neuroprosthetics: A Case Study", IEEE Trans. Neural Systems and Rehab. Engr., vol. 14, no. 2, pp. 217-221, JUN, 2006.

Yang, X., Y. Choi, J-S. Lim, T. Nishida, and S. Thompson, "Strain induced changes in the gate leakage current of n-channel metal-oxide-semiconductor field-effect transistors", J. Appl. Phys., vol. 109, pp. 9, 06/2011.

Son, S. Y., Y. Choi, P. Kumar, H. W. Park, T. Nishida, R. K. Singh, and S. Thompson, "Strain induced changes in gate leakage current and dielectric constant of nitrided Hf-silicate metal oxide semiconductor capacitors", Appl. Phys. Lett., vol. 93, pp. 153505-1–153505-3, OCT, 2008.

Struk, P., A. Billard, S. Bargiel, Q. Tanguy, C. Gorecki, R. Chutani, N. Passilly, and H. Xie, "The SS-OCT endomicroscopy probe based on MOEMS Mirau micro-interferometer for early stomach cancer detection", Optical Micro- and NanometrologyOptical Micro- and Nanometrology VII, Strasbourg, France, SPIE, 2018.

Kagan, C. R., D. P. Arnold, D. J. Cappelleri, C. M. Keske, and K. T. Turner, "Special report: The Internet of Things for Precision Agriculture (IoT4Ag)", Computers and Electronics in Agriculture, vol. 196, pp. 106742, Jan-05-2022.

Yardibi, T., J. Li, P. Stoica, and L. Cattafesta, "Sparsity Constrained Deconvolution Approaches for Acoustic Source Mapping", J. Acous. Soc. Amer., vol. 123, no. 5, pp. 2631-2642, MAY, 2008.

Benard, N., E. Moreau, J. Griffin, and L. Cattafesta, "Slope seeking for autonomous lift improvement by plasma surface discharge", Experiments in Fluids, vol. 48, issue 5, pp. 791-808, 05/2010.

Senior, D., X. Cheng, M. Machado, and Y.K. Yoon, "Single and Dual Band Bandpass Filters Using Complementary Split Ring Resonator Loaded Half Mode Substrate Integrated Waveguide", 2010 IEEE Antenna Propagation Symposium, Toronto, Canada, July 2010.

Chu, M., A. D. Koehler, A. Gupta, T. Nishida, and S. Thompson, "Simulation of AlGaN/GaN high-electron-mobility transistor gauge factor based on two-dimnensional electron gas density and electron mobility", J. Appl. Phys. , vol. 108, pp. 6, 11/2010.

Aram, E., R. Mittal, and L. Cattafesta, "Simple Representations of Zero-Net Mass-Flux Jets in Grazing Flow for Flow-Control Simulations", International Journal of Flow Control, vol. 2, issue 2, pp. 109 - 125, 06/2010.

Raju, R., E. Aram, R. Mittal, and L. Cattafesta, "Simple Models of Zero-Net Mass-Flux Jets for Flow Control Simulations", International Journal of Flow Control, vol. 1, no. 3, pp. 179-197, SEP, 2009.

Wang, W., J. Chen, A.S. Zivkovic, C. Duan, and H. Xie, "A silicon based Fourier transform spectrometer base on an open-loop controlled electrothermal MEMS mirror", TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, USA, IEEE, pp. 212 - 215, 7/2015.

Chandrasekharan, V., J. Naughton, and M. Sheplak, "Shear Stress Measurements", Encyclopedia of Aerocpace Engineering, 1, vol. 1, 2010.

Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear layer time-delay correction using a non-intrusive acoustic point source", International Journal of Aeroacoustics, vol. 10, no. 5 & 6, pp. 497-530, 9/2011.

Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear Layer Correction Validation using a Non-Intrusive Acoustic Point Source", 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, June, 2010.

Smarslok, B. P., D. Alexander, R. T. Haftka, L. Carraro, and D. Ginsbourger, "Separable Monte Carlo Simulation Applied to Laminated Composite Plates Reliability", 49th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, AIAA, 04/2008.

Kadirvel, S., F. Liu, S. Horowitz, T. Nishida, K. Ngo, L. Cattafesta, and M. Sheplak, "A Self-Powered Wireless Active Acoustic Liner", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.

Rassay, S., F. Hakim, C. Li, C. Forgey, N. Choudhary, and R. Tabrizian, "A Segmented‐Target Sputtering Process for Growth of Sub‐50 nm Ferroelectric Scandium–Aluminum–Nitride Films with Composition and Stress Tuning", physica status solidi (RRL) – Rapid Research Letters, vol. 15, issue 5, pp. 2100087, Jan-05-2021.

Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.

Raju, R., Q. Gallas, R. Mittal, and L. Cattafesta, "Scaling of Pressure Drop for Oscillatory Flow through a Slot", Phys. Fluids, vol. 19, no. 7, JUL, 2007.

Challa, V. R., S. Cheng, and D. P. Arnold, "The role of coupling strength in the performance of electrodynamic vibrational energy harvesters", Smart Materials and Structures, vol. 22, issue 2, pp. 025005, 02/2013.