Publications

Barnard, C., J. Meloy, and M. Sheplak, "An instrumentation grade wall shear stress sensing system", 2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.

Barnard, C., D. Mills, and M. Sheplak, "A system for vector measurement of aerodynamic wall shear stress", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.

Barquist, C. S., P. Zheng, W. G. Jiang, Y. Lee, Y.-K. Yoon, T. Schumann, J. Nogan, and M. Lilly, "Development of a Spatially Resolved 3He Quasi-Particle Detector", Journal of Low Temperature Physics, vol. 183, issue 3-4, pp. 307 - 312, Jan-05-2016.

Bashirullah, R., J. Harris, J. C. Sanchez, T. Nishida, and J. Principe, "Florida Wireless Implantable Recording Electrodes (FWIRE) for Brain Machine Interfaces", IEEE International Symposium on Circuits and Systems (ISCAS 2007), 2084 , June, 2007.

Bauer, M. J., A. Thomas, B. Isenberg, J. Varela, A. Faria, D. P. Arnold, and J. S. Andrew, "Ultra-Low-Power Current Sensor Utilizing Magnetoelectric Nanowires", IEEE Sensors Journal, vol. 20, issue 10, pp. 5139 - 5145, Mar-05-2021, 2020.

Bauer, M. J., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Magnetic field sensors using arrays of electrospun magnetoelectric Janus nanowires", Microsystems & Nanoengineering, vol. 4, issue 1, Jan-12-2018.

Bauer, M., D. P. Arnold, and J. Andrew, "Arrays of Janus-Type Magnetoelectric Nanowires for Passive Magnetic Field Sensing", 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO), Cork, Ireland, IEEE, 2018.

Bauer, M., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Assembly of magnetoelectric nanowires into magnetic field sensors", 2017 Electronic Materials and Applications Conference, Orlando, FL, 2017.

Baykan, M., S. Thompson, and T. Nishida, "Strain effects on three-dimensional, two-dimensional, and one-dimensional silicon logic devices: Predicting the future of strained silicon", Journal of Applied Physics, vol. 108, no. 9, pp. 093716-24, 11/2010.

Bedair, S. S., C. D. Meyer, and B. C. Morgan, "Magnetic Nanoparticle Dosing of MEMS Structures by Solvent Evaporation in Capillaries", IEEE Transactions on Magnetics, vol. 46, issue 6, no. 6, pp. 2198 - 2201, 06/2010.

Benard, N., J-P. Bonnet, E. Moreau, J. Griffin, and L. Cattafesta, "Benefits of Using Hysteresis Effects for Closed-Loop Separation Control by Plasma Actuator", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.

Benard, N., E. Moreau, J. Griffin, and L. Cattafesta, "Slope seeking for autonomous lift improvement by plasma surface discharge", Experiments in Fluids, vol. 48, issue 5, pp. 791-808, 05/2010.

Benard, N., L. Cattafesta, E. Moreau, J. Griffin, and J-P. Bonnet, "On the benefits of hysteresis effects for closed-loop separation control using plasma actuation", Physics of Fluids, vol. 23, issue 8, pp. 083601, 2011.

Benard, N., E. Moreau, J. Griffin, and L. Cattafesta, "Plasma flow control - autonomous lift improvement by slope-seeking", 39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4182, San Antonio, TX, June, 2009.

Bernard, B. P., J. W. Peyser, B. Mann, and D. P. Arnold, "Using the mass ratio to induce band gaps in a 1D array of nonlinearly coupled oscillators", Proc. ASME 2012 Int. Design Engineering Tech. Conf. & Computers and Information in Eng. Conf. (IDETC/CIE 2012), Chicago, IL, ASME, 08/2012.

Bernard, B. P., M. J. Mazzoleni, N. Garraud, D. P. Arnold, and B. Mann, "Experimental investigation of bifurcation induced bandgap reconfiguration", J. Appl. Phys., vol. 116, 2014.

Bhanvadia, A. A., R. T. Farley, Y. Noh, and T. Nishida, "3D printing of hollow geometries using blocking liquid substitution stereolithography", Scientific Reports, vol. 13, issue 1, Jan-09-2023.

Bhanvadia, A. A., R. T. Farley, Y. Noh, and T. Nishida, "High-resolution stereolithography using a static liquid constrained interface", Communications Materials, vol. 2, issue 1, 2021.

Bhardwaj, S., M. Sheplak, and T. Nishida, "S/N Optimization and Noise Considerations for Piezoresistive Microphones", 16th International Conference on Noise in Physical Systems and 1/f Fluctuations, Gainesville, FL, World Scientific, pp. 549-552, October, 2001.

Tabrizian, R., "Fabrication Process Flows for Implementation of Piezoelectric MEMS Resonators", Microsystems and Nanosystems, vol. Piezoelectric MEMS Resonators, Cham, Springer International Publishing, pp. 283 - 298, 2017.

Bigham, S., A. Fazeli, and S. Moghaddam, "Physics of microstructures enhancement of thin film evaporation heat transfer in microchannels flow boiling", Scientific Reports, vol. 7, pp. 44745, May-17-2017.

Bigham, S., and S. Moghaddam, "Fundamentals of Microchannel Flow Boiling Sub-processes and Similarities and Differences with Pool Boiling", 15th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM), Cambridge, MA, 2017.

Bigham, S., D. Yu, D. Chugh, and S. Moghaddam, "Moving beyond the limits of mass transport in liquid absorbent microfilms through the implementation of surface-induced vortices", Energy, vol. 65, pp. 621 - 630, Jan-02-2014.

Bigham, S., R. Nasr Isfahani, and S. Moghaddam, "Direct molecular diffusion and micro-mixing for rapid dewatering of LiBr solution", Applied Thermal Engineering, vol. 64, issue 1-2, pp. 371 - 375, Jan-03-2014.

Bigham, S., and S. Moghaddam, "Physics of the Microchannel Flow Boiling Process and Comparison With the Existing Theories", Journal of Heat Transfer, vol. 139, issue 11, pp. 111503, Jan-11-2017.