Publications

Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.

Min, M., W. LEE, T. Burks, J. Jordan, A. Schumann, J. Schueller, and H. Xie, "Design of a hyperspectral nitrogen sensing system for orange leaves", Computers and Electronics in Agriculture, vol. 63, issue 2, pp. 215 - 226, 10/2008.

Neugroschel, A., C-T. Sah, K. Han, M. Carroll, T. Nishida, J. Kavalieros, and Y. Lu, "Direct-current measurements of oxide and interface traps on oxidized silicon", IEEE Trans. Electron Dev., vol. 42, pp. 1657-1662, SEP, 1995.

Martin, D., "Design, fabrication, and characterization of a MEMS dual-backplate capacitive microphone", Deparment of Electrical and Computer Engineering, vol. Ph.D., Gainesville, University of Florida, pp. 250, 2007.

Oyarzun, M., and L. Cattafesta, "Design and Optimization of Piezoceramic Zero-Net Mass-Flux Actuators", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 07/2010.

Pal, S., and H. Xie, "Distributed and lumped element models for a bimorph-actuated micromirror", Journal of Micromechanics and Microengineering, vol. 20, no. 4, pp. 045020, 2010.

Pal, S., and H. Xie, "Design and Fabrication of 2D Fast Electrothermal Micromirrors with Large Scan Range and Small Center Shift", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.

Pal, S., and H. Xie, "Dynamic Compact Thermal Model of an Electrothermal Micromirror Based on Transmission Line Theory", Microtech Conference and Expo (Nanotech 2010 vol. 2), Anaheim, CA, NSTI, 2010.

Pan, Y., Z. Wang, Z.L. Wu, A. Jain, and H. Xie, "Diagnosis of Biological Tissue Morphology and Function with Endoscopic Optical Coherence Tomography", 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference2005 IEEE Engineering in Medicine and Biology 27th Annual Conference, Shanghai, China, IEEE, pp. 7217 - 7220, 2005.

Patrick, E., M. Ordonez, C. Batich, J. C. Sanchez, and T. Nishida, "Design and Fabrication of Flexible Substrate Microelectrode Array for Brain Machine Interfaces", IEEE EMBS, New York, NY, August, 2006.

Patrick, E., V. Sankar, W. Rowe, J. C. Sanchez, and T. Nishida, "Design of an Implantable Intracortical Microelectrode System for Brain-Machine Interfaces", 4th International IEEE EMBS Conference on Neural Engineering, Antalya, Turkey, April, 2009.

Petrov, G., J. Davis, W. Schumaker, M. Vargas, V. Chvykov, B. Hou, A. Maksimchuk, V. Yanovsky, A. G. R. Thomas, K. Krushelnick, et al., "Development of mini-undulators for a table-top free-electron laserAbstract", Laser and Particle Beams, vol. 36, issue 3, pp. 396 - 404, Jan-09-2018.

Phipps, A., F. Liu, L. Cattafesta, M. Sheplak, and T. Nishida, "Demonstration of a wireless, self-powered electroacoustic liner system", J. Acoust. Soc. Am, vol. 125, no. 2, pp. 873-881, FEB, 2009.

Raju, R., R. Mittal, and L. Cattafesta, "Dynamics of Airfoil Separation Control Using Zero-Net Mass-Flux Forcing", AIAA Journal, vol. 46, no. 12, pp. 3103-3115, DEC, 2008.

Rassay, S., D. Mo, and R. Tabrizian, "Dual-Mode Scandium-Aluminum Nitride Lamb-Wave Resonators Using Reconfigurable Periodic Poling", Micromachines, vol. 13, issue 7, pp. 1003, Jan-07-2022.

Rendon-Hernandez, A., and S. Basrour, "On the design guidelines for miniaturizing thermo-magnetically activated piezoelectric energy generator", Journal of Physics: Conference Series, vol. 1052, pp. 012053, Jan-07-2018.

Shekhawat, A., G. Walters, N. Yang, J. Guo, T. Nishida, and S. Moghaddam, Data retention and low voltage operation of Al2O3/Hf0.5Zr0.5O2 based ferroelectric tunnel junctions, 2020.

Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear-Stress Sensor Using Stokes Layer Excitation", 36th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 98-0585, Reno, NV, January, 1998.

Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear Stress Sensor using Stokes Layer Excitation", AIAA Journal, vol. 39, issue 5, no. 5, pp. 819-823, JUN, 2001.

Smith, S. E., M. A. Halim, A. A. Rendon-Hernandez, and D. P. Arnold, "Dual-Transduction Electromechanical Receiver for Near-Field Wireless Power Transmission", 2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS)2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS), Gainesville, FL, USA, IEEE, 2021.

Sun, J., C. Duan, S. Samuelson, and H. Xie, "Design and Characterization of MEMS Based Optical Coherence Tomography Endoscopic Probe", Biomedical OpticsBiomedical Optics and 3-D Imaging, Miami, FloridaWashington, D.C., OSA, pp. BTu3A.79, 2012.

Tanguy, Q., S. Bargiel, H. Xie, N. Passilly, M. Barthès, O. Gaiffe, J. Rutkowski, P. Lutz, and C. Gorecki, "Design and Fabrication of a 2-Axis Electrothermal MEMS Micro-Scanner for Optical Coherence Tomography", Micromachines, vol. 8, issue 6, pp. 146, Jan-06-2017.

Tasneem, Z., D. Wang, H. Xie, and K. Sanjeev, "Directionally Controlled Time-of-Flight Ranging for Mobile Sensing Platforms", Robotics: Science and Systems 2018Robotics: Science and Systems XIV: Robotics: Science and Systems Foundation, 2018.

Tseng, V. F. G., and H. Xie, "Design and fabrication of a high-density multilayer metal–insulator–metal capacitor based on selective etching", Journal of Micromechanics and Microengineering, vol. 23, issue 3, pp. 035025, 03/2013.

Tseng, V.F.-G., J. Li, X. Zhang, and H. Xie, "Design and fabrication of an electromagnetically actuated optical switch with precise tilt angle control", Optical MEMS and Nanophotonics (OMN), 2013 International Conference on, pp. 67-68, Aug, 2013.