Found 89 results
Author Title Type [ Year(Asc)]
Filters: First Letter Of Title is D  [Clear All Filters]
Jia, K., S. Pal, L. Wu, D. Hamilton, and H. Xie, "Dental optical coherence tomography employing miniaturized MEMS-based imaging probe", Optical MEMS and Nanophotonics, 2009 IEEE/LEOS International Conference on, pp. 1 -2, 2009.
Boniche, I., S. Masilamani, R. Durscher, B. C. Morgan, and D. P. Arnold, "Design of a Miniaturized Thermoelectric Generator using Micromachined Silicon Substrates", Journal of Electronic Materials, vol. 38, no. 7, pp. 1293-1302, 07/2009.
Patrick, E., V. Sankar, W. Rowe, J. C. Sanchez, and T. Nishida, "Design of an Implantable Intracortical Microelectrode System for Brain-Machine Interfaces", 4th International IEEE EMBS Conference on Neural Engineering, Antalya, Turkey, April, 2009.
Agashe, J., D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
Zhou, Y., J. Johnson, L. Wu, S. Maley, A. Ural, and H. Xie, "Design and Fabrication of Microheaters for Localized Carbon Nanotube Growth", 2008 8th IEEE Conference on Nanotechnology (NANO)2008 8th IEEE Conference on Nanotechnology, Arlington, Texas, USA, IEEE, pp. 452 - 455, 2008.
Min, M., W. LEE, T. Burks, J. Jordan, A. Schumann, J. Schueller, and H. Xie, "Design of a hyperspectral nitrogen sensing system for orange leaves", Computers and Electronics in Agriculture, vol. 63, issue 2, pp. 215 - 226, 10/2008.
Williams, M. D., J. Zito, J. Agashe, A. Sopeju, and D. P. Arnold, "Design of an Electrodynamically Actuated Microvalve Using COMSOL Multiphysics and MATLAB", COMSOL Conference, Hannover, Germany, November, 2008.
Wu, L., and H. Xie, "A dual-reflective electrothermal MEMS micromirror for full circumferential scanning endoscopic imaging", MEMS/MOEMS Components and Their Applications V. Special Focus Topics: Transducers at the Micro-Nano InterfaceProceedings of SPIE, vol. 6885, San Jose, CA, USA, SPIE, pp. 688508 - 688508-8, 01/2008.
Zhang, J., C. Das, and H. Z. Fan, "Dynamic coating for protein separation in cyclic olefin copolymer microfluidic devices", Microfluidics and Nanofluidics, vol. 5, issue 3, pp. 327 - 335, 9/2008.
Raju, R., R. Mittal, and L. Cattafesta, "Dynamics of Airfoil Separation Control Using Zero-Net Mass-Flux Forcing", AIAA Journal, vol. 46, no. 12, pp. 3103-3115, DEC, 2008.
Xia, Z., L. Cattafesta, and H. Z. Fan, "Deconvolution microscopy for flow visualization in microchannels", Analytical Chemistry, vol. 79, no. 6, pp. 2576-2582, JUN, 2007.
Wang, M., I. Batarseh, K. Ngo, and H. Xie, "Design and Fabrication of Integrated Power Inductor Based on Silicon Molding Technology", Proc. of the 38th Annual IEEE Power Electronics Specialists Conference (PESC'07), Orlando, FL, IEEE, 06/2007.
Martin, D., "Design, fabrication, and characterization of a MEMS dual-backplate capacitive microphone", Deparment of Electrical and Computer Engineering, vol. Ph.D., Gainesville, University of Florida, pp. 250, 2007.
Kadirvel, K., D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, "Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone", 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.
Homeijer, B., L. Cattafesta, T. Nishida, and M. Sheplak, "Design of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements", 13th AIAA/CEAS Aeroacoustics Conference and Exhibit, Rome, Italy, May, 2007.
Masilamani, S., I. Boniche, C. D. Meyer, R. Durscher, and D. P. Arnold, "Design of a tubular microfabricated power generation system for hot exhaust streams", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Development of a micromachined piezoelectric microphone for aeroacoustics applications", J. Acoust. Soc. Am., vol. 122, no. 6, pp. 3428-3436, DEC, 2007.
Das, C., C. K. Fredrickson, Z. Xia, and H. Z. Fan, "Device fabrication and Integration with photodefinable microvalves for protein separation", Sensors and Actuators A: Physical, vol. 134, no. 1, pp. 271-277, FEB, 2007.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.
Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
Pan, Y., Z. Wang, Z.L. Wu, A. Jain, and H. Xie, "Diagnosis of Biological Tissue Morphology and Function with Endoscopic Optical Coherence Tomography", 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference2005 IEEE Engineering in Medicine and Biology 27th Annual Conference, Shanghai, China, IEEE, pp. 7217 - 7220, 2005.
Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Dynamic calibration technique for thermal shear-stress sensors", Experiments in Fluids, vol. 38, pp. 56-65, JUL, 2005.