Publications

Found 167 results
Author Title Type [ Year(Asc)]
Filters: Author is Mark Sheplak  [Clear All Filters]
2009
Cattafesta, L., and M. Sheplak, Fundamentals and Applications of Modern Flow Control, vol. 231, pp. 149-175, DEC, 2009.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.
Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", 2009 ASME International Mechanical Engineering Congress, Lake Buena Vista, FL, November, 2009.
2008
Liu, F., A. Phipps, S. Horowitz, K. Ngo, L. Cattafesta, T. Nishida, and M. Sheplak, "Acoustic energy harvesting using an electromechanical Helmholtz resonator", J. Acoust. Soc. Am., vol. 123, no. 4, APR, 2008.
Liu, J., D. Martin, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Harmonic Balance Nonlinear Identification of a capacitive dual-backplate MEMS microphone", J. Microelectromechanical Systems, vol. 17, no. 3, pp. 698-708, JUN, 2008.
Martin, D., K. Kadirvel, T. Nishida, and M. Sheplak, "An Instrumentation Grade MEMS Condenser Microphone for Aeroacoustic Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-257, January, 2008.
Sheplak, M., L. Cattafesta, and Y. Tian, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 67-73, 2008.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
Griffin, B. A., B. Homeijer, M. D. Williams, B. V. Sankar, and M. Sheplak, "Large Deflections of Clamped Composite Circular Plates with Initial In-Plane Tension", IMAC XXVI, A Conference and Exposition on Structural Dynamics, Orlando, FL, February, 2008.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.
Liu, J., D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Nonlinear Model and System Identification of a Capacitive Dual-Backplate MEMS Microphone", J. Sound Vib., vol. 309, no. 1-2, pp. 276-292, JAN, 2008.
Papila, M., M. Sheplak, and L. Cattafesta, "Optimization of Clamped Circular Piezoelectric Composite Actuators", Sensors & Actuators A, vol. 147, no. 1, pp. 310-323, SEP, 2008.
Martin, D., K. Kadirvel, T. Nishida, and M. Sheplak, "A Surface Micromachined Capacitive Microphone for Aeroacoustic Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2008.
2007
Schultz, T., M. Sheplak, and L. Cattafesta, "Application of multivariate uncertainty analysis to frequency response function estimates", J. Sound Vib., vol. 305, no. 1-2, pp. 116-133, AUG, 2007.
Martin, D., "Design, fabrication, and characterization of a MEMS dual-backplate capacitive microphone", Deparment of Electrical and Computer Engineering, vol. Ph.D., Gainesville, University of Florida, pp. 250, 2007.
Kadirvel, K., D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, "Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone", 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.
Homeijer, B., L. Cattafesta, T. Nishida, and M. Sheplak, "Design of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements", 13th AIAA/CEAS Aeroacoustics Conference and Exhibit, Rome, Italy, May, 2007.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Development of a micromachined piezoelectric microphone for aeroacoustics applications", J. Acoust. Soc. Am., vol. 122, no. 6, pp. 3428-3436, DEC, 2007.
Xia, Z., L. Cattafesta, R. Mei, M. Sheplak, and H. Z. Fan, "Fluid Mixing in Channels with Microridges", Proceedings of IMECE 2007 ASME International Mechanical Engineering Congress and Exposition, pp. Seattle, WA, November, 2007.
Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.
Guo, B., J. Li, H. Zmuda, and M. Sheplak, "Multifrequency Microwave-Induced Thermal Acoustic Imaging for Breast Cancer Detection", IEEE Trans. Bio. Eng., vol. 54, no. 11, pp. 2000-2010, NOV, 2007.
Liu, F., S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, "A multiple degree of freedom electromechanical Helmholtz resonator", J. Acoust. Soc. Am., vol. 122, no. 1, pp. 291-301, JUL, 2007.
Williams, M. D., B. A. Griffin, B. Homeijer, B. V. Sankar, and M. Sheplak, "The Nonlinear Behavior of a Post-Buckled Circular Plate", 6th IEEE Conference on Sensors, October, 2007.