Publications

Found 167 results
Author Title [ Type(Desc)] Year
Filters: Author is Sheplak, Mark  [Clear All Filters]
Conference Paper
Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A MEMS Direct Skin Friction Sensor", Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.
Sheplak, M., and J. Seiner, "A MEMS Microphone for Aeroacoustics Measurements", 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Tuzzo, S., D. Martin, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS-Based Sound Intensity Probe", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3260, Hilton Head, SC, May, 2003.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.
Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.
Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", 2009 ASME International Mechanical Engineering Congress, Lake Buena Vista, FL, November, 2009.
Naughton, J., and M. Sheplak, "Modern Skin Friction Measurement Techniques: Description, Use, and What to Do with the Data", 21st AIAA Advanced Measurement Technology and Ground Testing Conference, AIAA Paper 2000-2521, Denver, CO, June, 2000.
Nishida, T., R. Dieme, M. Sheplak, and G. Bosman, "Noise Modeling and Characterization of Piezoresistive Transducers", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-15392, November, 2006.
Williams, M. D., B. A. Griffin, B. Homeijer, B. V. Sankar, and M. Sheplak, "The Nonlinear Behavior of a Post-Buckled Circular Plate", 6th IEEE Conference on Sensors, October, 2007.
Liu, J., D. Martin, K. Kadirvel, T. Nishida, M. Sheplak, and B. Mann, "Nonlinear Identification of a Capacitive Dual-Backplate MEMS Microphone", 2005 ASME International Design Engineering Technical Conferences, Paper DETC2005-84591, Long Beach, CA, September, 2005.
Griffin, B. A., B. Homeijer, V. Chandrasekaran, B. V. Sankar, and M. Sheplak, "A Nonlinear Model for the Large Deflections and Buckling of Circular Composite Diaphragms", 2005 ASME International Mechanical Engineering Congress & Exposition, November, 2005.
Liu, J., D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Nonlinear System Identification of a MEMS Dual-Backplate Capacitive Microphone by Harmonic Balance Method", 2005 ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2005-82880, Orlando, FL, November, 2005.
Horowitz, S., T-A. Chen, L. Cattafesta, M. Sheplak, T. Nishida, and V. Chandrasekaran, "Optical Flow Sensor Using Geometric Moire Interferometry", 34th International Conference on Environmental Systems, SAE Paper 2004-01-2267, Colorado Springs, CO, July, 2004.