Publications

Found 463 results
Author Title [ Type(Asc)] Year
Filters: First Letter Of Last Name is C  [Clear All Filters]
Conference Paper
Benard, N., J-P. Bonnet, E. Moreau, J. Griffin, and L. Cattafesta, "Benefits of Using Hysteresis Effects for Closed-Loop Separation Control by Plasma Actuator", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.
Bowrothu, R., H. Kim, C. S. Smith, X..N.Guan, S. Cui, F. Herrault, and D. P. Arnold, "Batch-fabricated substrate-embedded Ka band self-biased circulators using screen-printed strontium hexaferrite/PDMS composite", Tech. Dig. Intl. Microwave Symposium, June 2021.
Bowrothu, R., H-in. Kim, C. Smith, X. N. Guan, S. Cui, F. Herrault, D. P. Arnold, and Y. Kyu Yoon, "Batch-Fabricated Substrate-Embedded K a Band Self-Biased Circulators Using Screen-Printed Strontium Hexaferrite/PDMS Composite", 2021 IEEE/MTT-S International Microwave Symposium - IMS 20212021 IEEE MTT-S International Microwave Symposium (IMS), Atlanta, GA, USA, IEEE, 2021.
Hsu, A., C. Cowan, W. Chu, B. McCoy, A. Wong-Foy, R. Pelrine, C. Velez, D. P. Arnold, J. Lake, J. Ballard, et al., "Automated 2D micro-assembly using diamagnetically levitated milli-robots", 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Montreal, QC, IEEE, 2017.
Hsu, A., C. Cowan, W. Chu, B. McCoy, A. Wong-Foy, R. Pelrine, C. Velez, D. P. Arnold, J. Lake, J. Ballard, et al., "Automated 2D micro-assembly using diamagnetically levitated milli-robots", 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Montreal, QC, IEEE, 2017.
Cheng, J., W. Liu, Q. Chen, N. Xu, Q. Sun, Y. Liu, W. Wang, and H. Xie, "An auto-aligned vertical comb drive for low-cost variable optical attenuators", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.
Cheng, J., W. Liu, Q. Chen, N. Xu, Q. Sun, Y. Liu, W. Wang, and H. Xie, "An auto-aligned vertical comb drive for low-cost variable optical attenuators", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.
Chandrasekaran, V., B. V. Sankar, L. Cattafesta, T. Nishida, and M. Sheplak, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.
Chandrasekaran, V., B. V. Sankar, L. Cattafesta, T. Nishida, and M. Sheplak, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.
Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.
Bahr, C., F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.
Wang, G., B. V. Sankar, L. Cattafesta, and M. Sheplak, "Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS", International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.
Carroll, B., E. Boulos, M. Sytsma, L. Cattafesta, J. Hubner, and M. Sheplak, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.
Carroll, B., E. Boulos, M. Sytsma, L. Cattafesta, J. Hubner, and M. Sheplak, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.
Bahr, C., J. Li, and L. Cattafesta, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Cattafesta, L., and A. Pillarisetti, "Adaptive identification of fluid dynamic systems", 31th fluid dynamics conference & Exhibit, AIAA paper 2001-2978, June, 2001.
Tian, Y., Q. Song, and L. Cattafesta, "Adaptive Feedback Control of Flow Separation", 3rd Flow Control Conference, AIAA Paper 2006-3016, San Francisco, CA, June, 2006.
Tian, Y., L. Cattafesta, and R. Mittal, "Adaptive Control of Separated Flow", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1401, Reno, NV, January, 2006.
Wetzel, D., F. Liu, B. Rosenberg, and L. Cattafesta, "Acoustic Characteristics of a Circulation Control Airfoil", 15th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2009-3103, Miami, FL, May, 2009.
Lee, K., L. Wu, H. Xie, O. Ilegbusi, M. Costa, and J. P. Rolland, "A 5mm Catheter for Constant Resolution Probing in Fourier Domain Optical Coherence Endoscopy", Photonics West 2007, Proceedings of SPIE, vol. 6432, March, 2007.
Duan, C., W. Wang, X. Zhang, J. Ding, Q. Chen, A. Pozzi, and H. Xie, "A 45°-tilted 2-axis scanning micromirror integrated on a silicon optical bench for 3D endoscopic optical imaging", 2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS)2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS), Estoril, Portugal, IEEE, pp. 948 - 951, 1/2015.
Lee, W., H-in. Kim, S. Hwang, S. Jeon, H. Cho, and Y-K. Yoon, "3D integrated high gain rectenna in package with metamaterial superstrates for high efficiency wireless power transfer applications", 2021 IEEE 71st Electronic Components and Technology Conference (ECTC)2021 IEEE 71st Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, IEEE, 2021.
Lee, W., H-in. Kim, S. Hwang, S. Jeon, H. Cho, and Y-K. Yoon, "3D integrated high gain rectenna in package with metamaterial superstrates for high efficiency wireless power transfer applications", 2021 IEEE 71st Electronic Components and Technology Conference, 2021.
Lee, K-S., C. Koehler, E. G. Johnson, E. Valaski Teuma, O. Ilegbusi, M. Costa, H. Xie, and J. P. Rolland, "2mm catheter design for endoscopic optical coherence tomography", International Optical Design Conference 2006Proceedings of SPIE, vol. 6342, Vancouver, BC, Canada, SPIE, pp. 63420F - 63420F-9, 2006.
Wu, L., S. Samuelson, J. Sun, K. Jia, W. Lau, S. Choe, B. S. Sorg, and H. Xie, "A 2.8-mm imaging probe based on a high-fill-factor mems mirror and wire-bonding-free packaging for endoscopic optical coherence tomography", IEEE MEMS 2011, Cancun, Mexico, 2011.