Publications

Cleveland, C., M. E. Orazem, and S. Moghaddam, "Corrosion of Copper in De-Aerated Water by Impedance Spectroscopy", 223rd Electrochemical Society Meeting, Ontario, Canada, 05/2013.

Xu, S., K. Ngo, T. Nishida, G-B. Chung, and A. Sharma, "Converter and Controller for Micro-Power Energy Harvesting", Proceedings of IEEE Applied Power Electronics Conference, pp. 226-230, November, 2005.

Griffin, J., M. Oyarzun, L. Cattafesta, J. H. Tu, C. W. Rowley, and R. Mittal, "Control of a canonical separated flow", 43rd AIAA Fluid Dynamics Conference, San Diego, CA, 06/2013.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Compliant-Backplate Helmholtz Resonators for Active Noise Control Applications", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0817, Reno, NV, January, 2001.

Schultz, T., F. Liu, M. Sheplak, L. Cattafesta, and M. Jones, "A Comparison Study of Normal-Incidence Acoustic Impedance Measurements of a Perforate Liner", 15th AIAA/CEAS Aeroacoustics conference, AIAA 2009-3301, Miami, FL, May, 2009.

Bahr, C., and L. Cattafesta, "Comparison of Trailing Edge Noise Measurement Methods", Florida Center for Advanced Aero-Propulsion (FCAAP) - Annual Technical Symposium 2010, Tallahassee, August 2010.

Schultz, T., L. Cattafesta, and M. Sheplak, "Comparison of the two microphone method and the modal decomposition method for acoustic impedance testing", 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2695, Cambridge, MA, May, 2006.

Sawant, S. G., I. Eskinazi, M. Sheplak, L. Cattafesta, and D. P. Arnold, "A comparative study of two methods for driving electrodynamic zero-net-mass-flux actuators", 6th AIAA Flow Control Conf., New Orleans, LA, AIAA, 06/2012.

Zawodny, N., F. Liu, T. Yardibi, and L. Cattafesta, "A Comparative Study of a 1/4-scale Gulfstream G550 Aircraft Nose Gear Model", 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference), AIAA Paper 2009-3153, May, 2009.

Cheng, X., D. Senior, C. Kim, and Y.K. Yoon, "A Compact Self-packaged Patch Antenna with Non-Planar Complimentary Split Ring Resonator Loading", Antennas and Propagation Society International Symposium (APSURSI), 2011 IEEE, Spokane, WA, 06/2011.

Cheng, X., C. Kim, D. Senior, and Y.K. Yoon, "A Compact Self-Packaged Patch Antenna Folded inRegtangular Waveguide Shape", Antennas and Propagation Society International Symposium (APSURSI), 2011 IEEE, Spokane, WA, 06/2011.

Cheng, X., C. Kim, J. Kim, D. Senior, and Y.K. Yoon, "Compact Self-Packaged Active Folded Patch Antenna with Omni-directional Radiation Pattern", Electronic Components and Technology Conference (ECTC, Lake Buena Vista, Florida , 06/2011.

Kim, C., H. Ahn, J. Kim, X. Cheng, and Y.K. Yoon, "A Compact 5GHz WLAN Notched Bluetooth/UWB Antenna", Antennas and Propagation Society International Symposium (APSURSI), 2010 IEEE, Toronto, Canada, IEEE, 07/2010.

Senior, D., X. Cheng, PF. Jao, C. Kim, and Y.K. Yoon, "Compact 3D Integrable SU8 Embedded Microwave Bandpass Filters using Complementary Split Ring Resonator Loaded Half Mode Substate Integrated Waveguide", Electronic Components and Technology Conference ECTC 2011, Lake Buena Vista, FL, June 2011.

Dopico, P., K. Chen, J. I. Varillas, V. Pedrosa, T. J. George, and H. Z. Fan, "Circulating Tumor Cell Isolation from Clinical Samples Utilizing a Lateral Filter Array Microfluidic Device", MicroTAS 2019, October 2019.

Sawant, S. G., E. A. Deem, D.J. Agentis, L. Cattafesta, and D. P. Arnold, "Chip-scale electrodynamic synthetic jet actuators", 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2015), Estoril, Portugal, IEEE, 01/2015.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0666, Reno, NV, January, 2002.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.

Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Characterization of a MEMS-Based Floating Element Shear Stress Sensor", 47th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, 01/2009.

Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "A Bridge Voltage Doubler AC/DC Converter for Low-Voltage Energy Harvesting Applications", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington DC, pp. 25-28,, December, 2009.

Wang, W., Q. Chen, D. Wang, L. Zhou, and H. Xie, "A bi-directional large-stroke electrothermal MEMS mirror with minimal thermal and temporal drift", 2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS)2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA, IEEE, 2017.