Publications

Takahashi, H., F. Liu, M. Palavicini, M. Oyarzun, L. Ukeiley, and L. Cattafesta, "Experimental Study of Adaptive Control of High-Speed Flow-Induced Cavity Oscillations", Seventh International Conference on Flow Dynamics, Sendai, Japan, Tohoku University Global COE Program , 11/2010.

Wetzel, D., J. Griffin, F. Liu, and L. Cattafesta, "An Experimental Study of Circulation Control on an Elliptic Airfoil", 39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4280, San Antonio, TX, June, 2009.

R Isfahani, N., J. Darabi, and S. Moghaddam, "Experimental Study of Membrane-based Desorption Process in a New Generation LiBr-Water Absorption System", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.

R Isfahani, N., and S. Moghaddam, "Experimental Study of Membrane-based Phase Separation in Flow Boiling of a Binary Mixture", ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, Sapporo, Japan, 06/2013.

R Isfahani, N., and S. Moghaddam, "Experimental Study of Water Vapor Absorption into Lithium Bromide (LiBr) Solution Constrained by Superhydrophobic Porous Membranes", ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, 2013.

Meloy, J., J. Sells, V. Chandrasekharan, J. Griffin, L. Cattafesta, D. P. Arnold, and M. Sheplak, "Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Meloy, J., J. Griffin, J. Sells, V. Chandrasekharan, L. Cattafesta, and M. Sheplak, "Experimental Verification of a MEMS Based Skin Friction Sensor for Quantitative Wall Shear Stress Measurement", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, 06/2011.

Cattafesta, L., "Experimentation and Uncertainty Analysis for Engineers by Hugh Coleman and W. Glenn Steele", AIAA Journal, Vol. 38, No. 1, p. 191, 2000, JAN, 2000.

Wetzel, D., J. Griffin, and L. Cattafesta, "Experiments on an elliptic circulation control aerofoil", Journal of Fluid Mechanics, vol. 730, pp. 99 - 144, 9/2013.

Ghatge, M., and R. Tabrizian, "Exploiting elastic anharmonicity in aluminum nitride matrix for phase-synchronous frequency reference generation", Applied Physics Letters, vol. 112, issue 12, March, 2018.

Zito, J., D. P. Arnold, R. Durscher, and S. Roy, "Exploration of ceramic dielectrics for microscale dielectric barrier discharge plasma actuators", 44th AIAA Plasmadynamics and Lasers Conf., pp. 23, 06/2013.

Prestidge, D., R. Dhavalikar, A. C. Bohorquez, N. Garraud, M. Unni, A. Chiu-Lam, D. P. Arnold, and C. Rinaldi, "Exploring Iron Oxide Response under Biological Conditions using Magnetic Particle Spectrometry", 2016 Biomedical Engineering Society Annual Meeting, 2016.

Garraud, N., D. Alabi, S. Chyczewski, J. D. Varela, D. P. Arnold, and A. Garraud, "Extending the range of wireless power transmission for bioimplants and wearables", 17th PowerMEMS, Kanazawa, Japan, 2017.

Garraud, N., D. Alabi, S. Chyczewski, J. D. Varela, D. P. Arnold, and A. Garraud, "Extending the range of wireless power transmission for bio-implants and wearables", Journal of Physics: Conference Series, vol. 1052, pp. 012023, Jan-07-2018.

Koehler, A. D., A. Gupta, M. Chu, S. Parthasarathy, K. J. Linthicum, J. W. Johnson, T. Nishida, and S. Thompson, "Extraction of AlGaN/GaN HEMT Gauge Factor in the Presence of Traps", IEEE Electron Device Letters, vol. 31, pp. 3, 07/2010.

Maury, R., M. Koenig, L. Cattafesta, P. Jordan, J. Delville, J-P. Bonnet, and Y. Gervais, "Extremum-seeking optimisation of fluidic jet-noise control", 15th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2009-3132, May, 2009.

Mei, Q., C. K. Fredrickson, A. Simon, and H. Z. Fan, "FABRICATING A PLASTIC MESOFLUIDIC DEVICE FOR PROTEIN SYNTHESIS", ASME Conference, IMECE paper 2006-14122, Chicago, IL, November, 2006.

Reagan, T., J. Meloy, J. R. Underbrink, and M. Sheplak, "Fabrication and Characterization of a Flush-Mount MEMS Piezoelectric Dynamic Pressure Sensor and Associated Package for Aircraft Fuselage Arrays", 55th AIAA Aerospace Sciences Meeting55th AIAA Aerospace Sciences Meeting, Grapevine, Texas, American Institute of Aeronautics and Astronautics, 01/2017.

Clingenpeel, T., A. Rahimi, S. Hwangbo, Y.-K. Yoon, and A. Shorey, "Fabrication and characterization of advanced through glass via interconnects", International Symposium on Microelectronics, vol. 2016, issue 1, pp. 000288 - 000292, Feb-10-2016.

Qu, H., D. Fang, and H. Xie, "Fabrication and Characterization of an Integrated CMOS-MEMS Accelerometer", Nanotech 2007, Santa Clara, California, USA, 2007.

Shukla, S., K. Tae Kim, A. Baev, Y.K. Yoon, N. Litchinitser, and P. N. Prasad, "Fabrication and Characterization of Gold-Polymer Nanocomposite Plasmonic Nanoarrays in a Porous Alumina Template", ACS Nano, vol. 4, 2010.

Fang, S-P., S. Hwangbo, H. An, and Y. K. Yoon, "Fabrication and Characterization of Nanoporous Metallic Interconnects Using Electrospun Nanofiber Template and Electrochemical Deposition", 2017 IEEE 67th Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, IEEE, 2017.

Yang, T-S., N. Wang, and D. P. Arnold, "Fabrication and characterization of parylene-bonded Nd–Fe–B powder micromagnets", J. Applied Physics, vol. 109, no. 071753, 3 pages, 04/2011.

Zito, J., and D. P. Arnold, "Fabrication and Electrical Characterization of Microscale Dielectric Barrier Discharge Devices", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head), Hilton Head, SC, pp. 238-241, 06/2010.

Jiang, X., and H. Z. Fan, "Fabrication and Operation of Paper-Based Analytical Devices", Annual Review of Analytical Chemistry, vol. 9, issue 1, pp. 203 - 222, Dec-06-2016.