Publications

Zhang, J., K. Chen, and H. Z. Fan, "Circulating Tumor Cell Isolation and Analysis", Advances in Clinical Chemistry , vol. 75: ELSEVIER, pp. 1-31, 2016.

Sawant, S. G., E. A. Deem, D.J. Agentis, L. Cattafesta, and D. P. Arnold, "Chip-scale electrodynamic synthetic jet actuators", 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2015), Estoril, Portugal, IEEE, 01/2015.

Z. Fan, H., P. York, and S. Cherukuri, "Chip fabrication for combinatorial chemistry", Microstructures and Microfabricated Systems III, pp. 89-93, SEP, 1997.

Gu, P., K. Liu, H. Chen, T. Nishida, and H. Z. Fan, "Chemical-Assisted Bonding of Thermoplastics/Elastomer for Fabricating Microfluidic Valves", Analytical Chemistry, vol. 83, issue 1, pp. 446 - 452, 01/2011.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0666, Reno, NV, January, 2002.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", International Journal of Aeroacoustics, vol. 1, no. 2, pp. 183-205, APR, 2002.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.

Sheplak, M., A. Cain, T. Nishida, and L. Cattafesta, "Characterization of a Micromachined Thermal Shear Stress Sensor", AIAA Journal, vol. 40, no. 6, pp. 1099-1104, APR, 2002.

Sheplak, M., A. Cain, T. Nishida, and L. Cattafesta, "Characterization of a Micromachined Thermal Shear Stress Sensor", AIAA Journal, vol. 40, no. 6, pp. 1099-1104, APR, 2002.

Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Characterization of a MEMS-Based Floating Element Shear Stress Sensor", 47th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, 01/2009.

Wang, H., Z. Chen, H. Yang, H. Jiang, and H. Xie, "A Ceramic PZT-based pMUT Array for Endoscopic Photoacoustic Imaging", Journal of Microelectromechanical Systems, 2020.

Khnouf, R., D. Olivero, S. Jin, M. A. Coleman, and H. Z. Fan, "Cell-Free Expression of Soluble and Membrane Proteins in an Array Device for Drug Screening", Analytical Chemistry, vol. 82, 2010.

Sheng, W., O. O. Ogunwobi, T. Chen, J. Zhang, T. J. George, C. Liu, and H. Fan, "Capture, release and culture of circulating tumor cells from pancreatic cancer patients using an enhanced mixing chip", Lab on a Chip, vol. 14, issue 1, pp. 89, 2013, 2014.

Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "A Bridge Voltage Doubler AC/DC Converter for Low-Voltage Energy Harvesting Applications", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington DC, pp. 25-28,, December, 2009.

Bowsher, K., E. F. Civillico, J. Coburn, J. Collinger, J. L. Contreras-Vidal, T. Denison, J. Donoghue, J. French, N. Getzoff, L. R. Hochberg, et al., "Brain–computer interface devices for patients with paralysis and amputation: a meeting report", Journal of Neural Engineering, vol. 13, issue 2, pp. 023001, Jan-04-2016.

Bowsher, K., E. F. Civillico, J. Coburn, J. Collinger, J. L. Contreras-Vidal, T. Denison, J. Donoghue, J. French, N. Getzoff, L. R. Hochberg, et al., "Brain–computer interface devices for patients with paralysis and amputation: a meeting report", Journal of Neural Engineering, vol. 13, issue 2, pp. 023001, Jan-04-2016.

Bowsher, K., E. F. Civillico, J. Coburn, J. Collinger, J. L. Contreras-Vidal, T. Denison, J. Donoghue, J. French, N. Getzoff, L. R. Hochberg, et al., "Brain–computer interface devices for patients with paralysis and amputation: a meeting report", Journal of Neural Engineering, vol. 13, issue 2, pp. 023001, Jan-04-2016.

Bowsher, K., E. F. Civillico, J. Coburn, J. Collinger, J. L. Contreras-Vidal, T. Denison, J. Donoghue, J. French, N. Getzoff, L. R. Hochberg, et al., "Brain–computer interface devices for patients with paralysis and amputation: a meeting report", Journal of Neural Engineering, vol. 13, issue 2, pp. 023001, Jan-04-2016.

Wang, W., Q. Chen, D. Wang, L. Zhou, and H. Xie, "A bi-directional large-stroke electrothermal MEMS mirror with minimal thermal and temporal drift", 2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS)2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA, IEEE, 2017.

Benard, N., J-P. Bonnet, E. Moreau, J. Griffin, and L. Cattafesta, "Benefits of Using Hysteresis Effects for Closed-Loop Separation Control by Plasma Actuator", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.

Benard, N., L. Cattafesta, E. Moreau, J. Griffin, and J-P. Bonnet, "On the benefits of hysteresis effects for closed-loop separation control using plasma actuation", Physics of Fluids, vol. 23, issue 8, pp. 083601, 2011.