Publications

Found 463 results
Author Title [ Type(Asc)] Year
Filters: First Letter Of Last Name is C  [Clear All Filters]
Conference Paper
V.S., A. Kasyap, J. Lim, K. Ngo, A. Kurdila, T. Nishida, M. Sheplak, and L. Cattafesta, "Energy Reclamation from a Vibrating Piezoceramic Composite Beam", 9th International Congress on Sound and Vibration, Orlando, FL, July, 2002.
Je, S. - S., N. Wang, H. C. Brown, D. P. Arnold, and J. Chae, "An electromagnetically actuated microspeaker with fully-integrated wax-bonded Nd–Fe–B micromagnets for hearing aid applications", 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, 06/2009.
Challa, V. R., D. P. Arnold, and J. Oscar Mur-Miranda, "Electrodynamic wireless power transmission using low-frequency fields", 2nd Int. Workshop Wireless Energy Transport and Harvesting, Leuven, Belgium, 05/2012.
Cheng, X., D. Senior, and Y.K. Yoon, "Electrically Small Tunable Split Ring Resonator Antenna ", 2010 IEEE AP-S International Symposium on Antennas and Propagation, Toronto Canada, 07/2011.
Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Effect of dynamic pressure on direct shear stress sensor design", 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-004, 01/2010.
Chandrasekaran, V., A. Cain, T. Nishida, and M. Sheplak, "Dynamic Calibration Technique for Thermal Shear Stress Sensors with Variable Mean Flow", 38th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2000-0508, Reno, NV, January, 2000.
Chandrasekaran, V., A. Cain, T. Nishida, and M. Sheplak, "Dynamic Calibration Technique for Thermal Shear Stress Sensors with Variable Mean Flow", 38th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2000-0508, Reno, NV, January, 2000.
Kasyap, A., A. Phipps, T. Nishida, M. Sheplak, and L. Cattafesta, "Development of MEMS-based Piezoelectric Vibration Energy Harvesters", SEC IMAC, 02/2010.
Agashe, J., D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
Zhou, L., Y. Chen, X. Chen, Y. Hao, J. Coleman, and H. Xie, "Development of an electrothermal MEMS mirror based two-photon microscopy probe", Multiphoton Microscopy in the Biomedical Sciences XIXMultiphoton Microscopy in the Biomedical Sciences XIX, San Francisco, United States, SPIE, 2019.
Zhou, L., Y. Chen, X. Chen, Y. Hao, J. Coleman, and H. Xie, "Development of an electrothermal MEMS mirror based two-photon microscopy probe", Multiphoton Microscopy in the Biomedical Sciences XIXMultiphoton Microscopy in the Biomedical Sciences XIX, San Francisco, United States, SPIE, 2019.
Zhou, L., Y. Chen, X. Chen, Y. Hao, J. Coleman, and H. Xie, "Development of an electrothermal MEMS mirror based two-photon microscopy probe", Multiphoton Microscopy in the Biomedical Sciences XIXMultiphoton Microscopy in the Biomedical Sciences XIX, San Francisco, United States, SPIE, 2019.
Homeijer, B., L. Cattafesta, T. Nishida, and M. Sheplak, "Design of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements", 13th AIAA/CEAS Aeroacoustics Conference and Exhibit, Rome, Italy, May, 2007.
Kadirvel, K., D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, "Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone", 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.
Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
Jansson, D., J. Mathew, J. Hubner, M. Sheplak, and L. Cattafesta, "Design and Validation of an Aeroacoustic Test Facility", 8th AIAA / CEAS Aeroacoustics Conference, AIAA Paper 2002-2466, Breckenridge, CO, June, 2002.
Oyarzun, M., and L. Cattafesta, "Design and Optimization of Piezoceramic Zero-Net Mass-Flux Actuators", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 07/2010.
Wang, H., Y. Yu, Z. Chen, H. Yang, H. Jiang, and H. Xie, "Design and Fabrication of a Piezoelectric Micromachined Ultrasonic Transducer Array Based on Ceramic PZT", IEEE Sensors, New Delhi, India, IEEE, 2018.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.
Carroll, R. E., J. A. Little, B. P. Mann, and D. P. Arnold, "Demonstration of tunable energy propagation using magneto-mechanical oscillator arrays", 2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA, IEEE, 2017.
Carroll, R. E., J. A. Little, B. P. Mann, and D. P. Arnold, "Demonstration of tunable energy propagation using magneto-mechanical oscillator arrays", Proc. 30th IEEE Conf. Micro Electro Mechanical Systems (MEMS 2017), Las Vegas, NV, 01/2017.
Cheng, S., and D. P. Arnold, "Demonstration of a micromachined electrodynamic transformer and application in a resonant dc/ac power inverter", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Wang, Z., H. Adler, D. Chan, A. Jain, H. Xie, Z.L. Wu, and Y. Pan, "Cystoscopic optical coherence tomography for urinary bladder imaging in vivo", Coherence Domain Optical Methods and Optical Coherence Tomography in Biomedicine XProceedings of SPIE, vol. 6079, San Jose, CA, USA, SPIE, pp. 60790J - 60790J-9, 2006.
Cheng, X., D. Senior, PF. Jao, J. Kim, and Y.K. Yoon, "Corrugated Substrate Integrated Waveguide with Dual Band non-Bragg Resonance", IEEE International Microwave Symposium (IMS 2011) , Baltimore, Maryland, 07/2011.