Publications

Found 1228 results
Author Title [ Type(Desc)] Year
Conference Paper
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A MEMS Direct Skin Friction Sensor", Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.
Challa, V. R., and D. P. Arnold, "MEMS electrodynamic vibrational energy harvesters using multi-pole magnetic architectures", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Sheplak, M., and J. Seiner, "A MEMS Microphone for Aeroacoustics Measurements", 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.
Liu, L., S. Pal, and H. Xie, "MEMS Mirrors Based on Curved Concentric Electrothermal Actuators with Very Small Lateral Shift and Tilt", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.
Zhang, X., R. Zhang, S. Koppal, L. Butler, X. Cheng, and H. Xie, "MEMS mirrors submerged in liquid for wide-angle scanning", TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, USA, IEEE, pp. 847 - 850, 2015.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Xie, H., S. Guo, J. Sun, L. Liu, and L. Wu, "MEMS-Based 3D Optical Microendoscopy", 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society , Minneapolis, MN, 2009.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Xie, H., "MEMS-based endoscopic optical coherence tomography", (invited) Proc. of the 3rd Asian and Pacific Rim Symposium on Biophotonics, Cairns, Australia, July, 2007.
Xie, H., "MEMS-based endoscopic optical coherence tomography", MOEMS Display and Imaging Systems IIIProceedings of SPIE, vol. 5721, San Jose, CA, USA, SPIE, pp. 81 - 92, 2005.
Xie, H., "MEMS-Based Optical Coherence Imaging", 2005 Pacific Rim Conference on Lasers & Electro-Optics2005 Pacific Rim Conference on Lasers & Electro-Optics, Tokyo, Japan, IEEE, pp. 187 - 188, 2005.
Xie, H., G. K. Fedder, and Y. Pan, "MEMS-based Optical Coherence Tomography", Proceedings of at the SPIE Photonics West: MOEMS-MEMS 2005, San Jose, CA, 2005.
Tuzzo, S., D. Martin, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS-Based Sound Intensity Probe", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3260, Hilton Head, SC, May, 2003.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.
Lee, W., H. Kim, and Y-K. Yoon, "Metamaterial-inspired dual-function loop antenna for wireless power transfer and wireless communications", 2020 IEEE 70th Electronic Components and Technology Conference (ECTC)2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, IEEE, 2020.
Paneri, A., and S. Moghaddam, "Methanol and Proton Transport Characteristics of Graphene Oxide Proton Exchange Membrane", ASME 2013 Fuel Cell Science, Engineering and Technology Conference, Minneapolis, MN, 07/2013.
Bowers, B., J. Agashe, and D. P. Arnold, "A method to form bonded micromagnets embedded in silicon", Proc. 14th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 07), vol. 2, pp. 1581-1584, June, 2007.
Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductor with high inductance density via mechanical energy storage", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 181-184, 11/2011.
Garraud, N., D. Alabi, J.D. Varela, D. P. Arnold, and A. Garraud, "Microfabricated electrodynamic wireless power receiver for bio-implants and wearables", 2018 Digital Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, South Carolina, USASan Diego, Transducer Research Foundation, 2018.
Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
Bowers, B., O. D. Oniku, and D. P. Arnold, "Microfabrication and process integration of powder-based permanent magnets", Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.
Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
Velez, C., and D. P. Arnold, "Microfabrication of magnetically attached end effectors for micro/milli robots", Proc. 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS 2017), Montreal, Canda, 07/2017.