Publications

Siauw, W. Long, J-P. Bonnet, J. Tensi, L. Cordier, B. Noack, and L. Cattafesta, "Transient dynamics of the flow around a NACA 0015 airfoil using fluidic vortex generators ", International Journal of Heat and Fluid Flow, vol. 31, issue 3, pp. 450-459, 06/2010.

Siauw, W. Long, J-P. Bonnet, J. Tensi, and L. Cattafesta, "Physics of Separated Flow over a NACA 0015 Airfoil and Detection of Flow Separation", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-144, January, 2009.

Shukla, S., A. Baev, H. Jee, R. Hu, R. Burzynski, Y.K. Yoon, and P. N. Prasad, "Large-Area, Near-Infrared (IR) Photonic Crystals with Colloidal Gold Nanoparticles Embedding", ACS Applied Materials and Interfaces, vol. 2, 2010.

Shukla, S., X. Vidal, E. P. Furlani, M. T. Swihart, K. T. Kim, Y.K. Yoon, A. Urbas, and P. N. Prasad, "Subwavelength direct laser patterning of conductive gold nanostructures by simultaneous photopolymerization and photoreduction", ACS Nano, vol. 5 (3), 2011.

Shukla, S., K. Tae Kim, A. Baev, Y.K. Yoon, N. Litchinitser, and P. N. Prasad, "Fabrication and Characterization of Gold-Polymer Nanocomposite Plasmonic Nanoarrays in a Porous Alumina Template", ACS Nano, vol. 4, 2010.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly of multiple component types: simultaneous and sequential sorting of a heterogeneous mixture", Proc. 6th Conf. Foundations of Nanoscience (FNANO 2009), Snowbird, UT, 04/2009.

Shetye, S., and D. P. Arnold, "Magnetic self-assembly of millimeter scale components", 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN, 01/2008.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly of millimeter-scale components with angular orientation", J. Micromech. Syst., vol. 19, issue 3, pp. 599-609, 06/2010.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly with angular orientation and selective bonding", 2009 NSF CMMI Engineering Research and Innovation Conference, Honolulu, HI, 06/2009.

Shetye, S., J. Agashe, and D. P. Arnold, "Investigation of microscale magnetic forces for magnet array self-assembly", IEEE Trans. Magn., vol. 43, no. 6, pp. 2713-2715, JUN, 2007.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Part-to-Part and Part-to-Substarte Magnetic Self-Assembly of Millimeter Scale Components with Angular Orientation", Tech. Dig. 22nd IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2009), Sorrento, Italy, pp. 669-672, January, 2009.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008.

Sheplak, M., and E. Spina, "Control of High-Speed Impinging Jet Resonance", AIAA Journal, vol. 32, no. 8, pp. 1583-1588, JUL, 1994.

Sheplak, M., "MEMS-Based acoustic sensors for fluid mechanics and aeroacoustics", The Journal of the Acoustical Society of America, vol. 141, issue 5, pp. 3721 - 3721, Jan-05-2017.

Sheplak, M., and J. Seiner, "A MEMS Microphone for Aeroacoustics Measurements", 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.

Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.

Sheplak, M., and E. Spina, "Elimination of Impinging Jet Resonance", 31st AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 93-0733, Reno, NV, January, 1993.

Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear-Stress Sensor Using Stokes Layer Excitation", 36th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 98-0585, Reno, NV, January, 1998.

Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear Stress Sensor using Stokes Layer Excitation", AIAA Journal, vol. 39, issue 5, no. 5, pp. 819-823, JUN, 2001.

Sheplak, M., L. Cattafesta, and Y. Tian, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 67-73, 2008.

Sheplak, M., E. Spina, and C. McGinley, "Characterization of a Hot-Film Probe for Hypersonic Flow", 6th AIAA International Aerospace Plane and Hypersonic Technologies Conference, AIAA Paper 95-6110, Nashville, TN, April, 1995.

Sheplak, M., and J. Dugundji, "Large Deflections of Clamped Circular Plates Under Tension and Transitions to Membrane Behavior", J. Appl. Mech., vol. 65, no. 1, pp. 107-115, JUN, 1998.

Sheplak, M., E. Spina, and C. McGinley, "Hot-Film Anemometry in Hypersonic Flow", 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2232, Colorado Springs, CO, June, 1994.

Sheplak, M., A. Cain, T. Nishida, and L. Cattafesta, "Characterization of a Micromachined Thermal Shear Stress Sensor", AIAA Journal, vol. 40, no. 6, pp. 1099-1104, APR, 2002.

Sheplak, M., E. Spina, and C. McGinley, "Progress in Hot-Film Anemometry for Hypersonic Flow", Experimental Thermal and Fluid Science, vol. 13, no. 1, pp. 21-28, JUL, 1996.