Publications

Dai, X., L. Xi, C. Duan, H. Yang, H. Xie, and H. Jiang, "Miniature probe integrating optical-resolution photoacoustic microscopy, optical coherence tomography, and ultrasound imaging: proof-of-concept", Optics Letters, vol. 40, issue 12, pp. 2921, 2015.

Xi, L., C. Duan, H. Xie, and H. Jiang, "Miniature probe combining optical-resolution photoacoustic microscopy and optical coherence tomography for in vivomicrocirculation study", Applied Optics, vol. 52, issue 9, pp. 1928, 2013.

Han, F., W. Wang, X. Zhang, and H. Xie, "Miniature Fourier transform spectrometer with a dual closed-loop controlled electrothermal micromirror", Optics Express, vol. 24, issue 20, pp. 22650, Jan-01-2016.

Yang, H., D. Wang, T. Shan, X. Dai, H. Xie, L. Yang, and H. Jiang, "Miniature fluorescence molecular tomography (FMT) endoscope based on a MEMS scanning mirror and an optical fiberscope", Physics in Medicine & Biology, vol. 64, issue 12, pp. 125015, Jan-06-2019.

Liu, L., L. Wu, J. Sun, E. Lin, and H. Xie, "Miniature endoscopic optical coherence tomography probe employing a two-axis microelectromechanical scanning mirror with through-silicon vias", Journal of Biomedical Optics, vol. 16, issue 2, pp. 026006, 2011.

Luo, S., L. Zhou, D. Wang, C. Duan, H. Liu, Y. Zhu, G. Li, H. Zhao, J. Tang, Y. Wu, et al., "A Miniature Endoscopic Optical Coherence Tomography Probe Based on C-Lens", IEEE Photonics Journal, vol. 10, issue 5, pp. 1 - 10, Jan-10-2018.

Dai, X., H. Yang, T. Shan, H. Xie, S. A. Berceli, and H. Jiang, "Miniature Endoscope for Multimodal Imaging", ACS Photonics, vol. 4, issue 1, pp. 174 - 180, Dec-20-2016, 2017.

Halim, M. A., A. A. Rendon-Hernandez, S. E. Smith, J. M. Samman, N. Garraud, and D. P. Arnold, "Miniature Electrodynamic Wireless Power Transmission Receiver Using a Micromachined Silicon Suspension", Journal of Microelectromechanical Systems, vol. 30, issue 1, pp. 144 - 155, Jan-02-2021.

Wu, L., and H. Xie, "A Millimeter-Tunable-Range Microlens for Endoscopic Biomedical Imaging Applications", IEEE Journal of Quantum Electronics, vol. 46, issue 9, pp. 1237 - 1244, 09/2010.

Kim, J., and Y.K. Yoon, "Microworld: United We Stand", Lab on a Chip, vol. 10, 2010.

Peng, C., H. Lai, M. E. Orazem, and S. Moghaddam, "Microstructure of clay fabric in electrokinetic dewatering of phosphatic clay dispersions", Applied Clay Science, vol. 158, pp. 94 - 101, Jan-06-2018.

Fazeli, A., and S. Moghaddam, "Microscale phase separator for selective extraction of CO 2 from methanol solution flow", Journal of Power Sources, vol. 271, pp. 160 - 166, Jan-12-2014.

Fazeli, A., S. Bigham, and S. Moghaddam, "Microscale layering of liquid and vapor phases within microstructures for a new generation two-phase heat sink", International Journal of Heat and Mass Transfer, vol. 95, pp. 368 - 378, Jan-04-2016.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.

Xu, X., K. Liu, and Z.H. Fan, "Microscale 2D separation systems for proteomic analysis", Expert Review of Proteomics, vol. 9, issue 2, pp. 135 - 147, 04/2012.

Z. Fan, H., and D. J. Harrison, "Micromachining of capillary electrophoresis injectors and separators on glass chips and evaluation of flow at capillary intersections", Analytical Chemistry, vol. 66, pp. 177-184, SEP, 1994.

Harrison, D. J., K. Fluri, K. Seiler, H. Z. Fan, C. S. Effenhauser, and A. Manz, "Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip", Science, vol. 261, issue 5123, pp. 895 - 897, 08/1993.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined wiring board with integrated microinductor for chip-scale power conversion", IEEE Trans. Power Electron, vol. 29, no. 11, Nov. 2014.

Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.

Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.

Acosta, M. A., X. Jiang, P-K. Huang, K. B. Cutler, C. S. Grant, G. M. Walker, and M. P. Gamcsik, "A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia", Biomicrofluidics, vol. 8, issue 5, pp. 054117, 09/2014.

Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.

Qu, H., D. Fang, and H. Xie, Microfabrication and Characterization of an Integrated 3-Axis CMOS-MEMS Accelerometer: IEEE, pp. 60 - 67, 2005.

Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.

Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.