Publications

Fazeli, A., and S. Moghaddam, "Microscale phase separator for selective extraction of CO 2 from methanol solution flow", Journal of Power Sources, vol. 271, pp. 160 - 166, Jan-12-2014.

Fazeli, A., S. Bigham, and S. Moghaddam, "Microscale layering of liquid and vapor phases within microstructures for a new generation two-phase heat sink", International Journal of Heat and Mass Transfer, vol. 95, pp. 368 - 378, Jan-04-2016.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.

Xu, X., K. Liu, and Z.H. Fan, "Microscale 2D separation systems for proteomic analysis", Expert Review of Proteomics, vol. 9, issue 2, pp. 135 - 147, 04/2012.

Z. Fan, H., and D. J. Harrison, "Micromachining of capillary electrophoresis injectors and separators on glass chips and evaluation of flow at capillary intersections", Analytical Chemistry, vol. 66, pp. 177-184, SEP, 1994.

Harrison, D. J., K. Fluri, K. Seiler, H. Z. Fan, C. S. Effenhauser, and A. Manz, "Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip", Science, vol. 261, issue 5123, pp. 895 - 897, 08/1993.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined wiring board with integrated microinductor for chip-scale power conversion", IEEE Trans. Power Electron, vol. 29, no. 11, Nov. 2014.

Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.

Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.

Acosta, M. A., X. Jiang, P-K. Huang, K. B. Cutler, C. S. Grant, G. M. Walker, and M. P. Gamcsik, "A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia", Biomicrofluidics, vol. 8, issue 5, pp. 054117, 09/2014.

Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.

Qu, H., D. Fang, and H. Xie, Microfabrication and Characterization of an Integrated 3-Axis CMOS-MEMS Accelerometer: IEEE, pp. 60 - 67, 2005.

Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.

Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.

Wang, Y., B. Y. Jimenez, C. S. Smith, A. A. Rendon-Hernandez, J. Samman, and D. P. Arnold, "Microfabricated Electro-Permanent Magnets Using AlNiCo and CoPt", IEEE Magnetics Letters, vol. 12, pp. 1 - 5, Jan-01-2021.

Cheng, S., and D. P. Arnold, "Microfabricated electrodynamic transformers for electromechanical power conversion", J. Micromech. Microeng., vol. 23, no. 11, pp. 10, 11/2013.

Sawant, S. G., B. George, L. S. Ukeiley, and D. P. Arnold, "Microfabricated Electrodynamic Synthetic Jet Actuators", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 95 - 105, Nov-17-2017, 2018.

Jain, A., and H. Xie, "Microendoscopic Confocal Imaging Probe Based on an LVD Microlens Scanner", IEEE Journal of Selected Topics in Quantum Electronics, vol. 13, issue 2, pp. 228 - 234, 3/2007.

Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductors with high inductance density via mechanical energy storage", J. Micromech. Microeng., vol. 22, no. 9, pp. 11, 08/2012.

Buongiorno, J., D. G. Cahill, C. H. Hidrovo, S. Moghaddam, A. J. Schmidt, and L. Shi, "Micro- and Nanoscale Measurement Methods for Phase Change Heat Transfer on Planar and Structured Surfaces", Nanoscale and Microscale Thermophysical Engineering, vol. 18, issue 3, pp. 270 - 287, Mar-07-2014.

Mills, S. C., C. S. Smith, S. Pranesh Amirisetti, D. P. Arnold, J. S. Andrew, and N. Ferson, "Method for the fabrication of thick multilayered nickel/iron oxide nanoparticle magnetic nanocomposites", Journal of Magnetism and Magnetic Materials, vol. 542, pp. 168578, Jan-01-2022.

Nishida, T., R. Matsukawa, K. Masaki, Z. Dubinsky, and I. Karube, "A method for screening potential antioxidant activity", J. Biotechnology, vol. 51, pp. 149-155, DEC, 1996.

Smith, C. S., Y. Feng, and S. L. Burkett, "Method for patterning poly(acrylic acid) sacrificial layers for use in solder-based self-assembly", Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, vol. 35, issue 3, pp. 03D102, Jan-05-2017.

Chen, F., H. Xie, and G. K. Fedder, "A MEMS-Based Monolithic Electrostatic Microactuator for Ultra-Low Magnetic Disk Head Fly Height Control", IEEE Transaction on Magnetics, vol. 37, no. 4, pp. 1915-1918, JUL, 2001.

Sun, J., and H. Xie, "MEMS-Based Endoscopic Optical Coherence Tomography", International Journal of Optics, vol. 2011, no. 825629, 2011.