Publications

Cheng, S., and D. P. Arnold, "Optimization of Permanent Magnet Assemblies Using Genetic Algorithms", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4104-4107, 11/2011.

Wen, X., S. J. Kelly, J. S. Andrew, and D. P. Arnold, "Nickel-zinc ferrite/permalloy (Ni0.5Zn0.5Fe2O4/Ni-Fe) soft magnetic nanocomposites fabricated by electro-infiltration", AIP Advances, vol. 6, issue 5, pp. 056111, 05/2016.

Smith, C. S., S. C. Mills, S. Savliwala, C. Rinaldi, J. Andrew, and D. P. Arnold, "Nanoscale structural evaluation of 0-3 magnetic nanocomposites fabricated by electro-infiltration", AIP Advances, vol. 9, issue 12, pp. 125028, Jan-12-2019.

Yang, T-S., N. Wang, and D. P. Arnold, "Morphology and magnetic properties of electroplated Co-rich Co-Zn thin films", Microsystem Technologies, vol. 17, no. 1, pp. 85-91, 01/2011.

Cheng, S., N. Wang, and D. P. Arnold, "Modeling of magnetic vibrational energy harvesters using equivalent circuit representations", J. Micromech. Microeng., vol. 17, no. 11, pp. 2328-2335, NOV, 2007.

Sawant, S. G., M. Oyarzun, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Modeling of electrodynamic zero-net mass-flux actuators", AIAA Journal, vol. 50, no. 6, 06/2012.

Garraud, N., A. Garraud, D. Munzer, M. Althar, and D. P. Arnold, "Modeling and experimental analysis of rotating magnet receivers for electrodynamic wireless power transmission", Journal of Physics D: Applied Physics, vol. 52, issue 18, pp. 185501, Feb-27-2019.

Lanier, O. L., C. Velez, D. P. Arnold, and J. Dobson, "Model of Magnetic Particle Capture Under Physiological Flow Rates for Cytokine Removal During Cardiopulmonary Bypass", IEEE Transactions on Biomedical Engineering, vol. 68, issue 4, pp. 1198 - 1207, Jan-04-2021.

Halim, M. A., A. A. Rendon-Hernandez, S. E. Smith, J. M. Samman, N. Garraud, and D. P. Arnold, "Miniature Electrodynamic Wireless Power Transmission Receiver Using a Micromachined Silicon Suspension", Journal of Microelectromechanical Systems, vol. 30, issue 1, pp. 144 - 155, Jan-02-2021.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined wiring board with integrated microinductor for chip-scale power conversion", IEEE Trans. Power Electron, vol. 29, no. 11, Nov. 2014.

Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.

Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.

Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.

Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.

Wang, Y., B. Y. Jimenez, C. S. Smith, A. A. Rendon-Hernandez, J. Samman, and D. P. Arnold, "Microfabricated Electro-Permanent Magnets Using AlNiCo and CoPt", IEEE Magnetics Letters, vol. 12, pp. 1 - 5, Jan-01-2021.

Cheng, S., and D. P. Arnold, "Microfabricated electrodynamic transformers for electromechanical power conversion", J. Micromech. Microeng., vol. 23, no. 11, pp. 10, 11/2013.

Sawant, S. G., B. George, L. S. Ukeiley, and D. P. Arnold, "Microfabricated Electrodynamic Synthetic Jet Actuators", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 95 - 105, Nov-17-2017, 2018.

Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductors with high inductance density via mechanical energy storage", J. Micromech. Microeng., vol. 22, no. 9, pp. 11, 08/2012.

Mills, S. C., C. S. Smith, S. Pranesh Amirisetti, D. P. Arnold, J. S. Andrew, and N. Ferson, "Method for the fabrication of thick multilayered nickel/iron oxide nanoparticle magnetic nanocomposites", Journal of Magnetism and Magnetic Materials, vol. 542, pp. 168578, Jan-01-2022.

Patterson, W. C., N. Garraud, E. E. Shorman, and D. P. Arnold, "A magneto-optical microscope for quantitative measurement of magnetic microstructures", Review of Scientific Instruments, vol. 86, issue 9, pp. 094704, 09/2015.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly of millimeter-scale components with angular orientation", J. Micromech. Syst., vol. 19, issue 3, pp. 599-609, 06/2010.

Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.

Bauer, M. J., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Magnetic field sensors using arrays of electrospun magnetoelectric Janus nanowires", Microsystems & Nanoengineering, vol. 4, issue 1, Jan-12-2018.

Yarmola, E. G., Y. Shah, D. P. Arnold, J. Dobson, and K. D. Allen, "Magnetic Capture of a Molecular Biomarker from Synovial Fluid in a Rat Model of Knee Osteoarthritis", Annals of Biomedical Engineering, vol. 44, issue 4, pp. 1159 - 1169, 4/2016.