Publications

Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines embedded in fusion-bonded silicon", Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.

Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.

Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, pp. 157-190, 2009.

Arnold, D. P., I. Zana, and M. G. Allen, "Analysis and optimization of vertically oriented, throughwafer, laminated magnetic cores in silicon", J. Micromech. Microeng, vol. 15, no. 5, pp. 971-977, MAY, 2005.

Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, 2009.

Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.

Arnold, D. P., H. Burch, M. Mitchell, A. Garraud, and R. Moore, "Spinning magnets: an unconventional method for compact generation of ELF radio signals", IEEE AP-S/URSI, San Diego, CA, 2017.

Arnold, D. P., and N. Wang, "Permanent Magnets for MEMS", J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.

Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.

Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.

Arnold, D. P., F. Cros, I. Zana, D. Veazie, and M. G. Allen, "Electroplated metal microstructures embedded in fusion-bonded silicon: conductors and magnetic materials", J. Microelectromech. Syst., vol. 13, no. 5, pp. 791-798, OCT, 2004.

Arunajatesan, S., Q. Song, M. Palavicini, C. Moreno, and L. Cattafesta, "Towards Adaptive Closed-Loop Control of Transonic Cavity Flows", 4th Flow Control Conference: AIAA, 06/2008.

Arunajatesan, S., M. Oyarzun, M. Palavicini, and L. Cattafesta, "Modeling of Zero-Net Mass-Flux Actuators for Feedback Flow Control", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0743, January, 2009.

Augustine, S., P. Gu, X. Zheng, T. Nishida, and H. Z. Fan, "Low-power electrically controlled thermoelastic microvalves integrated in thermoplastic microfluidic devices", Microfluidics and Nanofluidics, vol. 19, issue 6, pp. 1385 - 1394, 12/2015.

Azie, O., K. Castillo-Torres, Z. Greenberg, D. P. Arnold, and J. Dobson, "Magnetically triggered release of active TGF-B from spin vortex microdiscs", Journal of Magnetism and Magnetic Materials, vol. 546, pp. 168732, Jan-03-2022.

Baek, SK., Y.K. Yoon, and J-H. Park, "Wireless actuated microvalve system using induction heating and its thermal effect on the microfluidic system", International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers’11), Beijing, China, 06/2011.

Bahr, C., and L. Cattafesta, "Comparison of Trailing Edge Noise Measurement Methods", Florida Center for Advanced Aero-Propulsion (FCAAP) - Annual Technical Symposium 2010, Tallahassee, August 2010.

Bahr, C., and L. Cattafesta, "Limits of Coherence-Based Aeroacoustic Analysis in the Presence of Distributed Sources", Journal of the Acoustical Society of America, vol. 129, no. 6, pp. EL248-EL253, 05/2011.

Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear Layer Correction Validation using a Non-Intrusive Acoustic Point Source", 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, June, 2010.

Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Bahr, C., J. Li, and L. Cattafesta, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Bahr, C., F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.

Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.

Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear layer time-delay correction using a non-intrusive acoustic point source", International Journal of Aeroacoustics, vol. 10, no. 5 & 6, pp. 497-530, 9/2011.

Barnard, C., D. Mills, and M. Sheplak, "A system for vector measurement of aerodynamic wall shear stress", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.