Publications

Mills, D. A., C. Barnard, and M. Sheplak, "Characterization of a Hydraulically Smooth Wall Shear Stress Sensor for Low-Speed Wind Tunnel Applications", 55th AIAA Aerospace Sciences Meeting55th AIAA Aerospace Sciences Meeting, Grapevine, TexasReston, Virginia, American Institute of Aeronautics and Astronautics, 2017.

Mills, D. A., W. C. Patterson, B. Freidkes, C. Keane, and M. Sheplak, "Characterization of a Fully-Differential, Dual-Axis, Capacitive Wall Shear Stress Sensor System for Low-Speed Wind Tunnels", AIAA Aviation 2019 ForumAIAA Aviation 2019 Forum, Dallas, TexasReston, Virginia, American Institute of Aeronautics and Astronautics, 2019.

Mills, D. A., W. C. Patterson, C. Keane, and M. Sheplak, "Characterization of a Fully-Differential Capacitive Wall Shear Stress Sensor for Low-Speed Wind Tunnels", 2018 AIAA Aerospace Sciences Meeting2018 AIAA Aerospace Sciences Meeting, Kissimmee, FloridaReston, Virginia, American Institute of Aeronautics and Astronautics, 2018.

Mills, S. C., C. S. Smith, D. P. Arnold, and J. S. Andrew, "Electrophoretic deposition of iron oxide nanoparticles to achieve thick nickel/iron oxide magnetic nanocomposite films", AIP Advances, vol. 10, issue 1, pp. 015308, Jan-01-2020.

Mills, S. C., C. S. Smith, S. Pranesh Amirisetti, D. P. Arnold, J. S. Andrew, and N. Ferson, "Method for the fabrication of thick multilayered nickel/iron oxide nanoparticle magnetic nanocomposites", Journal of Magnetism and Magnetic Materials, vol. 542, pp. 168578, Jan-01-2022.

Meyer, C. D., S. S. Bedair, L. Xue, C. M. Dougherty, R. Bashirullah, D. P. Arnold, and B. C. Morgan, "Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process", 220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined wiring board with integrated microinductor for chip-scale power conversion", IEEE Trans. Power Electron, vol. 29, no. 11, Nov. 2014.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors", IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined thick-film copper power inductors and transformers for integrated power converters", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2010), Hilton Head, SC, pp. 455-458, 06/2010.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "High-Inductance-Density, Air-Core, Power Inductors, and Transformers Designed for Operation at 100–500 MHz", IEEE Transactions on Magnetics, vol. 46, issue 6, pp. 2236 - 2239, 06/2010.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Ultra-miniaturized power converter modules using micromachined copper scaffolds", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Meyer, C. D., S. S. Bedair, B. C. Morgan, X. Lin, R. Bashirullah, D. P. Arnold, I. M. Kierzewski, and N. Lazarus, "Power management for small scale systems", Proc. SPIE Defense Security & Sensing Conf. (Micro- and Nanotechnology Sensors, Systems, and Applications VI), vol. 9083, Baltimore, MD, pp. 90831U, 05/2014.

Meloy, J., J. Griffin, J. Sells, V. Chandrasekharan, L. Cattafesta, and M. Sheplak, "Experimental Verification of a MEMS Based Skin Friction Sensor for Quantitative Wall Shear Stress Measurement", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, 06/2011.

Meloy, J., J. Sells, V. Chandrasekharan, J. Griffin, L. Cattafesta, D. P. Arnold, and M. Sheplak, "Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Mei, Q., C. K. Fredrickson, W. Lian, S. Jin, and H. Z. Fan, "Ricin Detection by Biological Signal Amplification in a Well-in-a-Well Device", Analytical Chemistry, vol. 78, issue 22, pp. 7659 - 7664, 11/2006.

Mei, Q., C. K. Fredrickson, A. Simon, and H. Z. Fan, "FABRICATING A PLASTIC MESOFLUIDIC DEVICE FOR PROTEIN SYNTHESIS", ASME Conference, IMECE paper 2006-14122, Chicago, IL, November, 2006.

Mei, Q., R. Khnouf, A. Simon, and H. Z. Fan, "Protein synthesis in a device with nanoporous membranes and microchannels", Lab on a Chip, vol. 10, issue 19, pp. 2541, 2010.

Mei, Q., Z. Xia, F. Xu, S. A. Soper, and H. Z. Fan, "Fabrication of Microfluidic Reactors and Mixing Studies for Luciferase Detection", Analytical Chemistry, vol. 80, issue 15, pp. 6045 - 6050, 08/2008.

Mei, Q., C.K. Fredrickson, A. Simon, R. Khnouf, and Z.H. Fan, "Cell-Free Protein Synthesis in Microfluidic Array Devices", Biotechnology Progress, vol. 23, issue 6, pp. 1305 - 1311, 12/2007.

Mei, Q., C. K. Fredrickson, S. Jin, and H. Z. Fan, "Toxin Detection by a Miniaturized in Vitro Protein Expression Array", Analytical Chemistry, vol. 77, no. 17, pp. 5494-5500, SEP, 2005.

McManamon, P. F., P. J. Bos, M. J. Escuti, J. Heikenfeld, S. Serati, H. Xie, and E. A. Watson, "A Review of Phased Array Steering for Narrow-Band Electrooptical Systems", Proceedings of the IEEE, vol. 97, issue 6, pp. 1078 - 1096, 06/2009.

McGinley, C., E. Spina, and M. Sheplak, "Turbulence Measurements in a Mach 11 Helium Boundary Layer", 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2364, Colorado Springs, CO, June, 1994.

McEachern, K. M., and D. P. Arnold, "Electrodynamic Wireless Power Transmission to a Torsional Receiver", Journal of Physics: Conference Series, vol. 476, London, UK, IOP Publishing, pp. 012004, 12/2013.

Maury, R., M. Koenig, L. Cattafesta, P. Jordan, J. Delville, J-P. Bonnet, and Y. Gervais, "Extremum-seeking optimisation of fluidic jet-noise control", 15th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2009-3132, May, 2009.

Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.