Publications

Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.

Blood, D., D. Mills, M. Sheplak, and T. Schmitz, "Picosecond Laser Ablation of Sapphire for High Temperature Sensor Fabrication", Technologies for Future Micro-Nano Manufacturing Workshop, Napa, CA, Transducers Research Foundation, 08/2011.

Bigham, S., R. Nasr Isfahani, and S. Moghaddam, "Direct molecular diffusion and micro-mixing for rapid dewatering of LiBr solution", Applied Thermal Engineering, vol. 64, issue 1-2, pp. 371 - 375, Jan-03-2014.

Bigham, S., D. Yu, D. Chugh, and S. Moghaddam, "Moving beyond the limits of mass transport in liquid absorbent microfilms through the implementation of surface-induced vortices", Energy, vol. 65, pp. 621 - 630, Jan-02-2014.

Bigham, S., and S. Moghaddam, "Analysis of Microchannel Flow Boiling Process using Unprecedented Microscale Experimental Data", ASME HT/FE/ICNMM 2016, 2016.

Bigham, S., and S. Moghaddam, "Role of bubble growth dynamics on microscale heat transfer events in microchannel flow boiling process", Applied Physics Letters, vol. 107, issue 24, pp. 244103, Feb-12-2016, 2015.

Bigham, S., and S. Moghaddam, "Physics of the Microchannel Flow Boiling Process and Comparison With the Existing Theories", Journal of Heat Transfer, vol. 139, issue 11, pp. 111503, Jan-11-2017.

Bigham, S., and S. Moghaddam, "Microscale Analysis of Mechanisms of Heat Transfer in Microchannel Flow Boiling Process", 15th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM), Cambridge, MA, 2017.

Bigham, S., A. Fazeli, and S. Moghaddam, "Physics of microstructures enhancement of thin film evaporation heat transfer in microchannels flow boiling", Scientific Reports, vol. 7, pp. 44745, May-17-2017.

Bigham, S., and S. Moghaddam, "Fundamentals of Microchannel Flow Boiling Sub-processes and Similarities and Differences with Pool Boiling", 15th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM), Cambridge, MA, 2017.

Tabrizian, R., "Fabrication Process Flows for Implementation of Piezoelectric MEMS Resonators", Microsystems and Nanosystems, vol. Piezoelectric MEMS Resonators, Cham, Springer International Publishing, pp. 283 - 298, 2017.

Bhardwaj, S., M. Sheplak, and T. Nishida, "S/N Optimization and Noise Considerations for Piezoresistive Microphones", 16th International Conference on Noise in Physical Systems and 1/f Fluctuations, Gainesville, FL, World Scientific, pp. 549-552, October, 2001.

Bhanvadia, A. A., R. T. Farley, Y. Noh, and T. Nishida, "3D printing of hollow geometries using blocking liquid substitution stereolithography", Scientific Reports, vol. 13, issue 1, Jan-09-2023.

Bhanvadia, A. A., R. T. Farley, Y. Noh, and T. Nishida, "High-resolution stereolithography using a static liquid constrained interface", Communications Materials, vol. 2, issue 1, 2021.

Bernard, B. P., M. J. Mazzoleni, N. Garraud, D. P. Arnold, and B. Mann, "Experimental investigation of bifurcation induced bandgap reconfiguration", J. Appl. Phys., vol. 116, 2014.

Bernard, B. P., J. W. Peyser, B. Mann, and D. P. Arnold, "Using the mass ratio to induce band gaps in a 1D array of nonlinearly coupled oscillators", Proc. ASME 2012 Int. Design Engineering Tech. Conf. & Computers and Information in Eng. Conf. (IDETC/CIE 2012), Chicago, IL, ASME, 08/2012.

Benard, N., L. Cattafesta, E. Moreau, J. Griffin, and J-P. Bonnet, "On the benefits of hysteresis effects for closed-loop separation control using plasma actuation", Physics of Fluids, vol. 23, issue 8, pp. 083601, 2011.

Benard, N., E. Moreau, J. Griffin, and L. Cattafesta, "Plasma flow control - autonomous lift improvement by slope-seeking", 39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4182, San Antonio, TX, June, 2009.

Benard, N., E. Moreau, J. Griffin, and L. Cattafesta, "Slope seeking for autonomous lift improvement by plasma surface discharge", Experiments in Fluids, vol. 48, issue 5, pp. 791-808, 05/2010.

Benard, N., J-P. Bonnet, E. Moreau, J. Griffin, and L. Cattafesta, "Benefits of Using Hysteresis Effects for Closed-Loop Separation Control by Plasma Actuator", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.

Bedair, S. S., C. D. Meyer, and B. C. Morgan, "Magnetic Nanoparticle Dosing of MEMS Structures by Solvent Evaporation in Capillaries", IEEE Transactions on Magnetics, vol. 46, issue 6, no. 6, pp. 2198 - 2201, 06/2010.

Baykan, M., S. Thompson, and T. Nishida, "Strain effects on three-dimensional, two-dimensional, and one-dimensional silicon logic devices: Predicting the future of strained silicon", Journal of Applied Physics, vol. 108, no. 9, pp. 093716-24, 11/2010.

Bauer, M., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Assembly of magnetoelectric nanowires into magnetic field sensors", 2017 Electronic Materials and Applications Conference, Orlando, FL, 2017.

Bauer, M., D. P. Arnold, and J. Andrew, "Arrays of Janus-Type Magnetoelectric Nanowires for Passive Magnetic Field Sensing", 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO), Cork, Ireland, IEEE, 2018.

Bauer, M. J., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Magnetic field sensors using arrays of electrospun magnetoelectric Janus nanowires", Microsystems & Nanoengineering, vol. 4, issue 1, Jan-12-2018.