Publications

Son, S. Y., Y. Choi, P. Kumar, H. W. Park, T. Nishida, R. K. Singh, and S. Thompson, "Strain induced changes in gate leakage current and dielectric constant of nitrided Hf-silicate metal oxide semiconductor capacitors", Appl. Phys. Lett., vol. 93, pp. 153505-1–153505-3, OCT, 2008.

Smith, C. S., K. Sondhi, S. C. Mills, J. S. Andrew, H. Z. Fan, T. Nishida, and D. P. Arnold, "Screen-printable and stretchable hard magnetic ink formulated from barium hexaferrite nanoparticles", Journal of Materials Chemistry C, 2020.

Smith, C. S., K. Sondhi, B. Y. Jimenez, H. Z. Fan, T. Nishida, and D. P. Arnold, "Screen-printed inductive silver ink strain sensor on stretchable TPU substrate", 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Virtual, 2020.

Smith, C. S., R. Bowrothu, Y. Wang, F. Herrault, Y. K. Yoon, and D. P. Arnold, "Screen-Printable, Self-Biased SrM/PDMS Composites for Integrated Magnetic Microwave Devices", IEEE Transactions on Magnetics, vol. 57, issue 10, pp. 1 - 5, Jan-10-2021.

Smarslok, B. P., D. Alexander, R. T. Haftka, L. Carraro, and D. Ginsbourger, "Separable Monte Carlo Simulation Applied to Laminated Composite Plates Reliability", 49th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, AIAA, 04/2008.

Shukla, S., X. Vidal, E. P. Furlani, M. T. Swihart, K. T. Kim, Y.K. Yoon, A. Urbas, and P. N. Prasad, "Subwavelength direct laser patterning of conductive gold nanostructures by simultaneous photopolymerization and photoreduction", ACS Nano, vol. 5 (3), 2011.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008.

Senior, D., X. Cheng, M. Machado, and Y.K. Yoon, "Single and Dual Band Bandpass Filters Using Complementary Split Ring Resonator Loaded Half Mode Substrate Integrated Waveguide", 2010 IEEE Antenna Propagation Symposium, Toronto, Canada, July 2010.

Sanchez, J. C., N. Alba, T. Nishida, C. Batich, and P. Carney, "Structural Modifications in Chronic Microwire Electrodes for Cortical Neuroprosthetics: A Case Study", IEEE Trans. Neural Systems and Rehab. Engr., vol. 14, no. 2, pp. 217-221, JUN, 2006.

Saini, R., S. Bhardwaj, T. Nishida, and M. Sheplak, "Scaling Relations for Piezoresistive Microphones", International Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2000.

Sadat, A., Y. Liu, J. Yuan, and H. Xie, "Soft breakdown effects on MOS switch and passive mixer", 2004 IEEE International Reliability Physics Symposium.2004 IEEE International Reliability Physics Symposium. Proceedings, Phoenix, AZ, USA, IEEE, pp. 653 - 654, 04/2004.

A. Rodriguez, S., N. Garraud, D. Alabi, A. Garraud, and D. P. Arnold, "A simple passive 390 mV ac/dc rectifier for energy harvesting applications", 18th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Application (Power MEMS 2018), Daytona Beach, FL, 2018.

A Rodriguez, S., N. Garraud, D. Alabi, A. Garraud, and D. P. Arnold, "A simple passive 390 mV ac/dc rectifier for energy harvesting applications", Journal of Physics: Conference Series, vol. 1407, pp. 012018, Jan-11-2019.

Fang, S-P., T. Schumann, L. Garcia, and Y.-K. Yoon, "Semiconductor-Based SensorsEmerging Nanotechnology for Strain Gauge Sensor", Semiconductor-Based Sensors: WORLD SCIENTIFIC, pp. 435 - 472, 2016.

Rassay, S., F. Hakim, C. Li, C. Forgey, N. Choudhary, and R. Tabrizian, "A Segmented‐Target Sputtering Process for Growth of Sub‐50 nm Ferroelectric Scandium–Aluminum–Nitride Films with Composition and Stress Tuning", physica status solidi (RRL) – Rapid Research Letters, vol. 15, issue 5, pp. 2100087, Jan-05-2021.

Raju, R., E. Aram, R. Mittal, and L. Cattafesta, "Simple Models of Zero-Net Mass-Flux Jets for Flow Control Simulations", International Journal of Flow Control, vol. 1, no. 3, pp. 179-197, SEP, 2009.

Raju, R., Q. Gallas, R. Mittal, and L. Cattafesta, "Scaling of Pressure Drop for Oscillatory Flow through a Slot", Phys. Fluids, vol. 19, no. 7, JUL, 2007.

Rahimi, A., and Y.-K. Yoon, "Study on Cu/Ni Nano Superlattice Conductors for Reduced RF Loss", IEEE Microwave and Wireless Components Letters, vol. 26, issue 4, pp. 258 - 260, Jan-04-2016.

Qu, H., D. Fang, and H. Xie, "A Single-crystal Silicon 3-axis CMOS-MEMS Accelerometer", IEEE Sensors, 2004, Vienna, Austria, IEEE, pp. 661 - 664, 10/2004.

Phipps, A., and T. Nishida, "System Modeling of Piezoelectric Energy Harvesters", IEEE Trans. Power Electronics, vol. 27, issue 2, 2012.

Pabon, R., C. Barnard, L. Ukeiley, and M. Sheplak, "Spatio-temporal characteristics of large scale motions in a turbulent boundary layer from direct wall shear stress measurement", Bulletin of the American Physical Society, 69th Annual Meeting of the APS Division of Fluid Dynamics, 2016.

Ok, I., K. Akarvardar, S. Lin, M. Baykan, C.D. Young, P.Y. Hung, M.P. Rodgers, S. Bennett, H.O. Stamper, D.L. Franca, et al., "Strained SiGe and Si FinFETs for High Performance Logic with SiGe/Si Stack on SOI", International Electron Devices Meeting, San Francisco, CA, IEEE, 2010.

Mortazavi, M., and S. Moghaddam, "Scalable Bonding of Polytetrafluoroethylene (ePTFE) Nanofibrous Membranes on Microstructures", Enabling Nanofabrication for Rapid Innovation, Napa, CA, 2013.

Mortazavi, M., A. Fazeli, and S. Moghaddam, "Scalable bonding of nanofibrous polytetrafluoroethylene (PTFE) membranes on microstructures", Journal of Micromechanics and Microengineering, vol. 28, issue 1, pp. 015001, Dec-01-2017, 2018.

Martin, D., K. Kadirvel, J. Liu, R. M. Fox, M. Sheplak, and T. Nishida, "Surface and Bulk Micromachined Dual Back-Plate Condenser Microphone", 18th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2005), Miami, FL, January, 2005.