Publications
"A piezoelectric unimorph actuator based tip-tilt-piston micromirror with high fill factor and small tilt and lateral shift", Sensors and Actuators A: Physical, vol. 167, issue 2, no. 6, pp. 495 - 501, 6/2011.
, "Piezoelectric energy harvesting for self‐powered wearable upper limb applications", Nano Select, Sep-02-2021.
, "Physics of the Microchannel Flow Boiling Process and Comparison With the Existing Theories", Journal of Heat Transfer, vol. 139, issue 11, pp. 111503, Jan-11-2017.
, "Physics of Strain Effects in Semiconductors and Metal-Oxide-Semiconductor Field-effect Transistors", Journal of Applied Physics, vol. 101, pp. 104503-107524, JAN, 2007.
, "Physics of microstructures enhancement of thin film evaporation heat transfer in microchannels flow boiling", Scientific Reports, vol. 7, pp. 44745, May-17-2017.
, "Physics of lithium bromide (LiBr) solution dewatering through vapor venting membranes", International Journal of Multiphase Flow, vol. 58, pp. 27 - 38, Jan-01-2014.
, "Physics of Fluid Transport in Hybrid Biporous Capillary Wicking Microstructures", Langmuir, vol. 32, issue 33, pp. 8289 - 8297, Nov-08-2017, 2016.
, "Physics of direct-contact ultrasonic cloth drying process", Energy, vol. 125, pp. 498 - 508, Feb-27-2017.
, "A physically based mobility model for MOSFET numerical simulation", IEEE Trans. Electron Devices, vol. 34, no. 2, pp. 310-320, FEB, 1987.
, "Photogrammetry Applied to Wind-Tunnel Testing", AIAA Journal, vol. 38, no. 6, pp. 964-971, JUN, 2000.
, "Photoacoustic endomicroscopy based on a MEMS scanning mirror", Optics Letters, vol. 42, issue 22, pp. 4615, Jan-01-2017.
, "Phase-Shift Based Time-Delay Estimators for Proximity Acoustic Sensors", IEEE Journal of Oceanic Engineering, vol. 27, no. 1, pp. 47-56, JUL, 2002.
, "Phase and Vibration Analysis for a CMOS-MEMS Gyroscope", International Journal of Nonlinear Sciences and Numerical Simulation, vol. 3, no. 3-4, 2002.
, "Permeability of glucose and other neutral species through recast perfluorosulfonated ionomer films", Analytical Chemistry, vol. 64, pp. 1304-1311, SEP, 1992.
, "Permanent Magnets for MEMS", J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.
, "Permanent magnet microstructures using dry-pressed magnetic powders", Journal of Micromechanics and Microengineering, vol. 23, issue 7, pp. 075027, 07/2013.
, "Patterning of thick electroplated CoPt magnets using SU-8 micromoulds", Micro & Nano Letters, vol. 14, issue 14, pp. 1393 - 1396, Jun-12-2020, 2019.
, "A Passive Wireless Microelectromechanical Pressure Sensor for Harsh Environments", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 73 - 85, Jan-02-2018.
, "Parametric study of water vapor absorption into a constrained thin film of lithium bromide solution", International Journal of Heat and Mass Transfer, vol. 55, issue 21-22, pp. 5687 - 5695, Jan-10-2012.
, "A parametric dynamic compact thermal model of an electrothermally actuated micromirror", Journal of Micromechanics and Microengineering, vol. 19, no. 6, pp. 065007, 2009.
, "Prospect of Increasing CHF to 10 kW/cm2 – A New Paradigm and Discovery of CHF Governing Physics", 15th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM), Cambridge, MA, 2017.
, "Physics of Heat Transfer Mechanisms in Microchannel Flow Boiling Process and Role of Surface Micro- and Nanostructures on Enhancement", International Workshop on New Understanding in Nanoscale/Microscale Phase Change Phenomena, 2016.
, "Physics of direct-contact ultrasonic cloth drying process", International Mechanical Engineering Congress & Exposition (IMECE), Tampa, FL, 2017.
, "Proton and Methanol Transport Characteristics of Laminated Graphene Oxide Nanoplatelets", ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, Sapporo, Japan, 06/2013.
, "Progress towards a micromachined thermoelectric generator using PbTe and PbSnSeTe thin films", Tech. Dig. 6th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2006), Berkeley, CA, pp. 195-198, November, 2006.
,