Publications

Xie, H., "MEMS-Based Optical Coherence Imaging", 2005 Pacific Rim Conference on Lasers & Electro-Optics2005 Pacific Rim Conference on Lasers & Electro-Optics, Tokyo, Japan, IEEE, pp. 187 - 188, 2005.

Xie, H., G. K. Fedder, and Y. Pan, "MEMS-based Optical Coherence Tomography", Proceedings of at the SPIE Photonics West: MOEMS-MEMS 2005, San Jose, CA, 2005.

Qu, H., D. Fang, and H. Xie, Microfabrication and Characterization of an Integrated 3-Axis CMOS-MEMS Accelerometer: IEEE, pp. 60 - 67, 2005.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.

Das, S., D. P. Arnold, I. Zana, J. Park, J. H. Lang, and M. G. Allen, "Multi-watt electric power from a microfabricated permanent-magnet generator", Tech. Dig. 18th IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2005), Miami Beach, FL, pp. 287-290, January, 2005.

Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.

Lim, J., X. Yang, T. Nishida, and S. Thompson, "Measurement of Conduction Band Deformation Potential Constants Using Gate Direct Tunneling Current in n-MOSFETs Under Mechanical Stress", Applied Physics Letters, vol. 89, pp. 073509, AUG, 2006.

Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "A MEMS Acoustic Energy Harvester", J. Micromech. Microeng., vol. 16, pp. S174-S181, SEP, 2006.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.

Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.

Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.

Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.

Qu, H., D. Fang, and H. Xie, "A Monolithic CMOS-MEMS 3-Axis Accelerometer with A Low-Noise, Low-Power Dual Chopper Amplifier", Solid-state Sensors, Actuators and Microsystem Workshop, Hilton Head, SC, pp. 224-227, June, 2006.

Todd, S., A. Jain, H. Qu, and H. Xie, "A Multi-Degree-of-Freedom Micromirror Utilizing Inverted-Series-Connected Bimorph Actuators", Journal of Optics A: Pure and Applied Optics, vol. 8, pp. s352-s359, 06/2006.

Choi, Y., J-S. Lim, T. Numata, T. Nishida, T. Nishida, and S. Thompson, "Mechanical stress altered electron gate tunneling current and extraction of conduction band deformation potentials for germanium", Journal of Applied Physics, vol. 102, pp. 104507-1–104507-5, DEC, 2007.

Xie, H., "MEMS-based endoscopic optical coherence tomography", (invited) Proc. of the 3rd Asian and Pacific Rim Symposium on Biophotonics, Cairns, Australia, July, 2007.

Bowers, B., J. Agashe, and D. P. Arnold, "A method to form bonded micromagnets embedded in silicon", Proc. 14th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 07), vol. 2, pp. 1581-1584, June, 2007.

Jain, A., and H. Xie, "Microendoscopic Confocal Imaging Probe Based on an LVD Microlens Scanner", IEEE Journal of Selected Topics in Quantum Electronics, vol. 13, issue 2, pp. 228 - 234, 3/2007.

Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.

Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.

Song, Q., Y. Tian, and L. Cattafesta, "MIMO Feedback Control of Flow Separation", 45th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2007-0109, Reno, NV, January, 2007.

Cheng, S., N. Wang, and D. P. Arnold, "Modeling of magnetic vibrational energy harvesters using equivalent circuit representations", J. Micromech. Microeng., vol. 17, no. 11, pp. 2328-2335, NOV, 2007.