Publications
"Assembly of magnetoelectric nanowires into magnetic field sensors", 2017 Electronic Materials and Applications Conference, Orlando, FL, 2017.
, "Analysis of Microchannel Flow Boiling Process using Unprecedented Microscale Experimental Data", ASME HT/FE/ICNMM 2016, 2016.
, "Automated 2D micro-assembly using diamagnetically levitated milli-robots", 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Montreal, QC, IEEE, 2017.
, "An auto-aligned vertical comb drive for low-cost variable optical attenuators", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.
, "Arrays of Janus-Type Magnetoelectric Nanowires for Passive Magnetic Field Sensing", 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO), Cork, Ireland, IEEE, 2018.
, "Anti-symmetric shear-extensional AlN lamb-wave resonators with kt 2 > 4%", 2017 Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium ((EFTF/IFC), BESANÇON, France, IEEE, 2017.
, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.
, "An analytical electrothermal model of a 1D electrothermal MEMS micromirror", Smart Structures, Devices, and Systems IIProceedings of SPIE, vol. 5649, Sydney, Australia, SPIE, pp. 344 - 353, 2005.
, "An Analytical Electrothermal Model of a 1-D Electrothermal MEMS Micromirror", SPIE International Symposium on Smart Materials, Nano-, and Micro-Smart Systems, Sydney, Australia, December, 2004.
, "Analysis, simulation and fabrication of curved multimorphs that undergo bending and twisting", Sensors, 2011 IEEE, pp. 667-670, Oct, 2011.
, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.
, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.
, "Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS", International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.
, "Analysis and Simulation of Curved Bimorph Microactuators", Microtech Conference and Expo (Nanotech 2010 vol. 2), Anaheim, CA, NSTI, 2010.
, "An Aluminum Nitride Piezoelectric Microphone for Aeroacoustics Applications", Hilton Head 2010: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, Transducer Research Foundation, Inc., 06/2010.
, "An Agile Tip-Tilt-Piston Micromirror With Large Aperture, Large Scanning Range and Low Driving Voltage", Hilton Head 2008, Technical Digest pp. 284-287, 2008.
, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.
, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
, "Advancements in electrodynamic wireless power transmission", IEEE Sensors Conf., Orlando,FL, 10.2016.
, "Advancements in electrodynamic wireless power transmission", 2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.
, "Adjustable refractive index method for complex microstructures by automated dynamic mode multidirectional UV lithography", International Conference of IEEE Micro Electro Mechanical Systems, Sorrento, Italy, 01/2009.
, "Adaptive identification of fluid dynamic systems", 31th fluid dynamics conference & Exhibit, AIAA paper 2001-2978, June, 2001.
, "Adaptive Feedback Control of Flow Separation", 3rd Flow Control Conference, AIAA Paper 2006-3016, San Francisco, CA, June, 2006.
, "Adaptive Control of Separated Flow", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1401, Reno, NV, January, 2006.
,