Publications

Found 167 results
Author [ Title(Asc)] Type Year
Filters: Author is Mark Sheplak  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
S
Saini, R., S. Bhardwaj, T. Nishida, and M. Sheplak, "Scaling Relations for Piezoresistive Microphones", International Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2000.
Griffin, B. A., D. Mills, T. Schmitz, and M. Sheplak, "Sapphire Sensors for High Temperature Applications", Florida Center for Advanced Aero-Propulsion Annual Technical Symposium, Tallahassee, FL, 08/2010.
Griffin, B. A., D. Mills, T. Schmitz, and M. Sheplak, "A Sapphire Based Fiber Optic Dynamic Pressure Sensor for Harsh Environments: Fabrication and Characterization", 49th AIAA Aerospace Sciences Meeting, Orlando, FL, AIAA, 01/2011.
R
Wang, Z., J. Li, T. Nishida, and M. Sheplak, "Robust Capon Beamformers for Wideband Acoustic Imaging", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3198, Hilton Head, SC, May, 2003.
Kurdila, A., B. Carroll, T. Nishida, and M. Sheplak, "Reduced Order Modeling for Low Reynolds Number Flow Control", Proceedings of SPIEs 6th Annual International Symposium on Smart Structures and Materials, Mathematics Modeling and Control Conference, vol. 3667, Newport Beach, CA, pp. 68-79, March, 1999.
P
Sheplak, M., E. Spina, and C. McGinley, "Progress in Hot-Film Anemometry for Hypersonic Flow", Experimental Thermal and Fluid Science, vol. 13, no. 1, pp. 21-28, JUL, 1996.
Dieme, R., J. Zhang, N. G. Rudawski, K. Jones, G. Bosman, M. Sheplak, and T. Nishida, "Process Dependence of 1/f Noise and Defects in Ion Implanted p-Type Piezoresistors", Journal of Applied Physics, vol. 112, 2012.
Chow, E., A. Partridge, V. Chandrasekaran, M. Sheplak, T. Nishida, C. Quate, and T. Kenny, "Process Compatible Polysilicon-Based Electrical Through-Wafer Interconnects In Silicon Substrates", J. Microelectromechanical Systems, vol. 11, no. 6, pp. 631-640, JUL, 2002.
Arnold, D. P., S. Bhardwaj, S. Gururaj, T. Nishida, and M. Sheplak, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
Papila, M., R. T. Haftka, T. Nishida, and M. Sheplak, "Piezoresistive Microphone Design Pareto Optimization: Tradeoff Between Sensitivity and Noise Floor", 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2003-1632, Norfolk, VA, April, 2003.
Papila, M., R. T. Haftka, T. Nishida, and M. Sheplak, "Piezoresistive Microphone Design Pareto Optimization: Tradeoff between Sensitivity and Noise Floor", J. Microelectromechanical Systems, vol. 15, no. 6, pp. 1632-1643, DEC, 2006.
Blood, D., D. Mills, M. Sheplak, and T. Schmitz, "Picosecond Laser Ablation of Sapphire for High Temperature Sensor Fabrication", Technologies for Future Micro-Nano Manufacturing Workshop, Napa, CA, Transducers Research Foundation, 08/2011.
Li, X., E. Larsson, M. Sheplak, and J. Li, "Phase-Shift Based Time-Delay Estimators for Proximity Acoustic Sensors", IEEE Journal of Oceanic Engineering, vol. 27, no. 1, pp. 47-56, JUL, 2002.
Rosenberg, K. T., S. Duvvuri, M. Luhar, B. J. McKeon, C. Barnard, B. Freidkes, J. Meloy, and M. Sheplak, "Phase relationships between velocity, wall pressure, and wall shear stress in a forced turbulent boundary layer", 46th AIAA Fluid Dynamics Conference, Washington, D.C.Reston, Virginia, American Institute of Aeronautics and Astronautics, 2016.
Rogers, J. E., Y-K. Yoon, M. Sheplak, and J. W. Judy, "A Passive Wireless Microelectromechanical Pressure Sensor for Harsh Environments", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 73 - 85, Jan-02-2018.
Sells, J., V. Chandrasekharan, H. Zmuda, M. Sheplak, and D. P. Arnold, "Passive Wireless Direct Shear Stress Measurement", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.
O
Mathew, J., Q. Song, B. V. Sankar, M. Sheplak, and L. Cattafesta, "Optimized Design of Piezoelectric Flap Actuators for Active Flow Control", AIAA Journal, vol. 44, no. 12, pp. 2919-2928, SEP, 2006.
Gallas, Q., G. Wang, M. Papila, M. Sheplak, and L. Cattafesta, "Optimization of Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0635, Reno, NV, January, 2003.
Papila, M., M. Sheplak, and L. Cattafesta, "Optimization of Clamped Circular Piezoelectric Composite Actuators", Sensors & Actuators A, vol. 147, no. 1, pp. 310-323, SEP, 2008.
Liu, F., S. Horowitz, L. Cattafesta, and M. Sheplak, "Optimization of an Electromechanical Helmholtz Resonator", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
Chen, T-A., D. Mills, V. Chandrasekharan, H. Zmuda, and M. Sheplak, "Optical Miniaturization of a MEMS-Based Floating Element Shear Stress Sensor with Moir", 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-0498, 01/2010.
Horowitz, S., T-A. Chen, L. Cattafesta, M. Sheplak, T. Nishida, and V. Chandrasekaran, "Optical Flow Sensor Using Geometric Moire Interferometry", 34th International Conference on Environmental Systems, SAE Paper 2004-01-2267, Colorado Springs, CO, July, 2004.
N
Liu, J., D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Nonlinear System Identification of a MEMS Dual-Backplate Capacitive Microphone by Harmonic Balance Method", 2005 ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2005-82880, Orlando, FL, November, 2005.
Griffin, B. A., B. Homeijer, V. Chandrasekaran, B. V. Sankar, and M. Sheplak, "A Nonlinear Model for the Large Deflections and Buckling of Circular Composite Diaphragms", 2005 ASME International Mechanical Engineering Congress & Exposition, November, 2005.
Liu, J., D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Nonlinear Model and System Identification of a Capacitive Dual-Backplate MEMS Microphone", J. Sound Vib., vol. 309, no. 1-2, pp. 276-292, JAN, 2008.