Publications

Found 249 results
Author Title Type [ Year(Desc)]
Filters: Author is David P. Arnold  [Clear All Filters]
2007
Bowers, B., J. Agashe, and D. P. Arnold, "A method to form bonded micromagnets embedded in silicon", Proc. 14th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 07), vol. 2, pp. 1581-1584, June, 2007.
Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
Cheng, S., N. Wang, and D. P. Arnold, "Modeling of magnetic vibrational energy harvesters using equivalent circuit representations", J. Micromech. Microeng., vol. 17, no. 11, pp. 2328-2335, NOV, 2007.
Cheng, S., N. Wang, and D. P. Arnold, "Optimization of magnetic vibrational energy harvesting systems using equivalent circuit representations", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2007), Freiburg, Germany, pp. 89-92, November, 2007.
Arnold, D. P., "Review of microscale magnetic power generation", IEEE Trans. Magn., vol. 43, no. 11, pp. 3940-3951, NOV, 2007.
2008
Williams, M. D., J. Zito, J. Agashe, A. Sopeju, and D. P. Arnold, "Design of an Electrodynamically Actuated Microvalve Using COMSOL Multiphysics and MATLAB", COMSOL Conference, Hannover, Germany, November, 2008.
Herrault, F., D. P. Arnold, I. Zana, P. Galle, and M. G. Allen, "High temperature operation of multi-watt, axial-flux, permanent-magnet microgenerators", Sensors & Actuators A, vol. 148, pp. 299-305, NOV, 2008.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.
Shetye, S., and D. P. Arnold, "Magnetic self-assembly of millimeter scale components", 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN, 01/2008.
Cheng, S., and D. P. Arnold, "A Multi-Pole Magnetic Generator with Enhanced Voltage Output for Low-Frequency Vibrational Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2008), Sendai Japan, pp. 125-128, November, 2008.
Boniche, I., B. C. Morgan, P. Taylor, C. D. Meyer, and D. P. Arnold, "Process development and material characterization of polycrystalline Bi2Te3, PbTe, and PbSnSeTe thin films on silicon for millimeter-scale thermoelectric generators", J. Vacuum Sci. Tech. A, vol. 26, no. 4, pp. 739-744, JUL, 2008.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008.
Bowers, B., and D. P. Arnold, "Spherical Magnetic Generators for Bio-Motional Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (Power MEMS 2008), Sendai, Japan, pp. 281-284, November, 2008.
Agashe, J., and D. P. Arnold, "A study of scaling and geometry effects on the forces between cuboidal and cylindrical magnets using analytical force solutions", J. Phys. D: Appl. Phys., vol. 41, no. 10, pp. 105001-1–105001-9, MAY, 2008.
Wang, N., and D. P. Arnold, "Thick electroplated Co-rich Co–Pt micromagnet arrays for magnetic MEMS", IEEE Trans. Magn., vol. 44, no. 11, pp. 3969-3972, 11/2008.
Wang, N., B. Bowers, and D. P. Arnold, "Wax-bonded NdFeB micromagnets for microelectromechanical systems application", J. Applied Physics, vol. 103, pp. 07E109, 04/2008.
2009
Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "A Bridge Voltage Doubler AC/DC Converter for Low-Voltage Energy Harvesting Applications", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington DC, pp. 25-28,, December, 2009.
Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Characterization of a MEMS-Based Floating Element Shear Stress Sensor", 47th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, 01/2009.
Boniche, I., S. Masilamani, R. Durscher, B. C. Morgan, and D. P. Arnold, "Design of a Miniaturized Thermoelectric Generator using Micromachined Silicon Substrates", Journal of Electronic Materials, vol. 38, no. 7, pp. 1293-1302, 07/2009.
Agashe, J., D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
Je, S. - S., N. Wang, H. C. Brown, D. P. Arnold, and J. Chae, "An electromagnetically actuated microspeaker with fully-integrated wax-bonded Nd–Fe–B micromagnets for hearing aid applications", 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, 06/2009.
Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, pp. 157-190, 2009.
Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, 2009.
Wang, N., and D. P. Arnold, "Fully batch-fabricated MEMS magnetic vibrational energy harvesters", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington, DC, December, 2009.