Publications

Found 1223 results
[ Author(Desc)] Title Type Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
A
Arnold, D. P., I. Zana, J. Park, S. Das, Y. Joung, D. Veazie, J. H. Lang, and M. G. Allen, "High-speed characterization and mechanical modeling of microscale, axial-flux, permanent-magnet generators", 13th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers 05), vol. 1, Seoul, Korea, pp. 701-704, June, 2005.
Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, pp. 157-190, 2009.
Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
Arnold, D. P., "Review of microscale magnetic power generation", IEEE Trans. Magn., vol. 43, no. 11, pp. 3940-3951, NOV, 2007.
Arnold, D. P., I. Zana, F. Herrault, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Optimization of a microscale, axial-flux, permanent-magnet generator", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 165-168, November, 2005.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "A directional acoustic array using silicon micromachined piezoresistive microphones", J. Acous. Soc. Amer., vol. 113, no. 1, pp. 289-298, JAN, 2003.
Arnold, D. P., and N. Wang, "Permanent Magnets for MEMS", J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.
Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.
Arnold, D. P., F. Cros, T. Glover, M. G. Allen, K. Hillman, and D. Veazie, "Materials and fabrication methods for high-temperature micro-magnetic machines for micro-turbine power generation", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 77-81, April, 2003.
Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, 2009.
Arnold, D. P., S. Bhardwaj, S. Gururaj, T. Nishida, and M. Sheplak, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
Arunajatesan, S., Q. Song, M. Palavicini, C. Moreno, and L. Cattafesta, "Towards Adaptive Closed-Loop Control of Transonic Cavity Flows", 4th Flow Control Conference: AIAA, 06/2008.
Arunajatesan, S., M. Oyarzun, M. Palavicini, and L. Cattafesta, "Modeling of Zero-Net Mass-Flux Actuators for Feedback Flow Control", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0743, January, 2009.
Augustine, S., P. Gu, X. Zheng, T. Nishida, and H. Z. Fan, "Low-power electrically controlled thermoelastic microvalves integrated in thermoplastic microfluidic devices", Microfluidics and Nanofluidics, vol. 19, issue 6, pp. 1385 - 1394, 12/2015.
Azie, O., K. Castillo-Torres, Z. Greenberg, D. P. Arnold, and J. Dobson, "Magnetically triggered release of active TGF-B from spin vortex microdiscs", Journal of Magnetism and Magnetic Materials, vol. 546, pp. 168732, Jan-03-2022.
B
Baek, SK., Y.K. Yoon, and J-H. Park, "Wireless actuated microvalve system using induction heating and its thermal effect on the microfluidic system", International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers’11), Beijing, China, 06/2011.
Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear Layer Correction Validation using a Non-Intrusive Acoustic Point Source", 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, June, 2010.
Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear layer time-delay correction using a non-intrusive acoustic point source", International Journal of Aeroacoustics, vol. 10, no. 5 & 6, pp. 497-530, 9/2011.
Bahr, C., J. Li, and L. Cattafesta, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Bahr, C., F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.
Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.
Bahr, C., and L. Cattafesta, "Comparison of Trailing Edge Noise Measurement Methods", Florida Center for Advanced Aero-Propulsion (FCAAP) - Annual Technical Symposium 2010, Tallahassee, August 2010.
Bahr, C., and L. Cattafesta, "Limits of Coherence-Based Aeroacoustic Analysis in the Presence of Distributed Sources", Journal of the Acoustical Society of America, vol. 129, no. 6, pp. EL248-EL253, 05/2011.
Barnard, C., D. Mills, J. Meloy, and M. Sheplak, "Development of a Hydraulically Smooth Wall Shear Stress Sensor Utilizing Through Silicon Vias", Hilton Head 2016 Workshop, 2016.