Publications

Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "A MEMS Acoustic Energy Harvester", J. Micromech. Microeng., vol. 16, pp. S174-S181, SEP, 2006.

Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A MEMS Direct Skin Friction Sensor", Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.

Sheplak, M., and J. Seiner, "A MEMS Microphone for Aeroacoustics Measurements", 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.

Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.

Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.

Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.

Sheplak, M., "MEMS-Based acoustic sensors for fluid mechanics and aeroacoustics", The Journal of the Acoustical Society of America, vol. 141, issue 5, pp. 3721 - 3721, Jan-05-2017.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.

Tuzzo, S., D. Martin, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS-Based Sound Intensity Probe", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3260, Hilton Head, SC, May, 2003.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.

Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.

Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.

Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.

Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.

Appukuttan, A., W. Shyy, M. Sheplak, and L. Cattafesta, "Mixed Convection Induced by MEMS-Based Thermal Shear Stress Sensors", Numerical Heat Transfer-A, vol. 43, no. 3, pp. 283-305, JUL, 2003.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.

Griffin, B. A., V. Chandrasekaran, M. D. Williams, B. V. Sankar, and M. Sheplak, "Model for thermoelastic actuation of an axisymmetric isotropic circular plate via an internal harmonic heat source", International Journal of Solids and Structures, 02/2011.

Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.

Sawant, S. G., M. Oyarzun, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Modeling of electrodynamic zero-net mass-flux actuators", AIAA Journal, vol. 50, no. 6, 06/2012.