Publications

Kagan, C. R., D. P. Arnold, M. G. Allen, and R. H. Olsson, "IoT4Ag: MEMS-Enabled Distributed Sensing, Communications, And Information Systems for The Internet Of Things For Precision Agriculture", 2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS)2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS), virtual, IEEE, 2021.

Velez, C., S. Hwangbo, S. T. Chyczewski, J. Ewing, R. Bowrothu, C. S. Smith, Y-K. Yoon, and D. P. Arnold, "Investigation of Ferromagnetic Resonance Shift in Screen-Printed Barium Ferrite/Samarium Cobalt Composites", IEEE Transactions on Microwave Theory and Techniques, vol. 67, issue 8, pp. 3230 - 3236, Jan-08-2019.

Wang, Y., J. Ewing, and D. P. Arnold, "Increasing the thickness and deposition rate of high-performance electroplated CoPt permanent magnets", 2018 Digital Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, South Carolina, USASan Diego, Transducer Research Foundation, 2018.

Dhavalikar, R., D. Hensley, L. Maldonado-Camargo, S. Ceron, N. Garraud, L. R. Croft, P. W. Goodwill, S. M. Conolly, D. P. Arnold, and C. Rinaldi, "Insights into Magnetic Particle Imaging Obtained from Modeling", 2016 AIChE Annual Meeting, 2016.

Castillo-Torres, K. Y., N. Garraud, D. P. Arnold, and E. S. McLamore, "Investigation of magnetic microdiscs for bacterial pathogen detection", SPIE Commercial + Scientific Sensing and Imaging (Smart Biomedical and Physiological Sensor Technology XIII), vol. 9863, Baltimore, Maryland, United States, SPIE, pp. 98630G, 2016.

Garraud, A., C. Velez, Y. Shah, N. Garraud, B. Kozissnik, E. G. Yarmola, K. D. Allen, J. Dobson, and D. P. Arnold, "Investigation of the Capture of Magnetic Particles From High-Viscosity Fluids Using Permanent Magnets", IEEE Transactions on Biomedical Engineering, vol. 63, issue 2, pp. 372 - 378, 2/2016.

Garraud, A., O. D. Oniku, and D. P. Arnold, "Influence of temperature on the magnetic properties of electroplated L10 CoPt thick films", Journal of Applied Physics, vol. 117, issue 17, pp. 17C718, 05/2015.

Little, J. A., R. E. Carroll, M. J. Mazzoleni, N. Garraud, D. P. Arnold, and B. P. Mann, "Investigation of wave propagation behavior in magnetically coupled MEMS oscillators", ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences (IDETC/CIE 2015), Boston, MA, ASME, 08/2015.

Carroll, R. E., N. Garraud, J. A. Little, M. J. Mazzoleni, B. Mann, and D. P. Arnold, "Investigation of wave propagation phenomena in microfabricated arrays of nonlinearly coupled oscillators", 18th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers 2015), Anchorage, Alaska, IEEE, TRF, EDS, 06/2015.

Oniku, O. D., P. V. Ryiz, A. Garraud, and D. P. Arnold, "Imprinting of fine-scale magnetic patterns in electroplated hard magnetic films using magnetic foil masks", Journal of Applied Physics, vol. 115, issue 17, pp. 17A718, 05/2014.

Garraud, A., E. Shorman, O. D. Oniku, B. Qi, and D. P. Arnold, "Influence of temperature on the magnetic properties of electroplated Co-rich Co-Pt thick films", Journal of Micromechanics and Microengineering, vol. 24, no. 1, 11/2013, 2014.

Mur-Miranda, J. Oscar, S. Cheng, and D. P. Arnold, "Improving the efficiency of electrodynamic wireless power transmission", 7th European Conf. Antennas and Propagation (EuCAP 2013), Gothenburg, Sweden, EurAAP, 04/2013.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors", IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.

Rao, Y., and D. P. Arnold, "Input-powered energy harvesting interface circuits with zero standby power", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1992-1999, 03/2011.

Rao, Y., and D. P. Arnold, "An input-powered vibrational energy harvesting interface circuit with zero standby power", IEEE Trans. Power Electron., vol. 46, no. 12, pp. 3524-3533, 12/2011.

Meyer, C. D., S. S. Bedair, L. Xue, C. M. Dougherty, R. Bashirullah, D. P. Arnold, and B. C. Morgan, "Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process", 220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.

Cheng, S., R. D. Natarajan, and D. P. Arnold, "The importance of coupling strength for maximizing the output power of electrodynamic vibrational energy harvesters", 10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 351-354, 12/2010.

Rao, Y., and D. P. Arnold, "An Input-Powered Active AC/DC Converter with Zero Standby Power for Energy Harvesting Applications", IEEE Energy Conversion Congress and Exposition (ECCE), Atlanta, GA, pp. 4441-4446, 09/2010.

Zito, J., D. P. Arnold, R. Durscher, and S. Roy, "Investigation of impedance characteristics and power delivery for dielectric barrier discharge plasma actuators", 48th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2010.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.

Shetye, S., J. Agashe, and D. P. Arnold, "Investigation of microscale magnetic forces for magnet array self-assembly", IEEE Trans. Magn., vol. 43, no. 6, pp. 2713-2715, JUN, 2007.