Publications

Kadirvel, K., R. Taylor, S. Horowitz, W. Hunt, M. Sheplak, and T. Nishida, "Design and Characterization of a MEMS Optical Microphone", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1030, Reno, NV, January, 2004.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.

Jansson, D., J. Mathew, J. Hubner, M. Sheplak, and L. Cattafesta, "Design and Validation of an Aeroacoustic Test Facility", 8th AIAA / CEAS Aeroacoustics Conference, AIAA Paper 2002-2466, Breckenridge, CO, June, 2002.

Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.

Kadirvel, K., D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, "Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone", 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.

Homeijer, B., L. Cattafesta, T. Nishida, and M. Sheplak, "Design of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements", 13th AIAA/CEAS Aeroacoustics Conference and Exhibit, Rome, Italy, May, 2007.

Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "Development of a MEMS Dual Backplate Capacitive Microphone for Aeroacoustic Measurements", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-1246, Reno, NV, January, 2006.

Freidkes, B., D. A. Mills, C. Keane, L. S. Ukeiley, and M. Sheplak, "Development of a Two-Dimensional Wall Shear Stress Sensor for Wind Tunnel Applications", AIAA Scitech 2019 ForumAIAA Scitech 2019 Forum, San Diego, CaliforniaReston, Virginia, American Institute of Aeronautics and Astronautics, 2019.

Kasyap, A., A. Phipps, T. Nishida, M. Sheplak, and L. Cattafesta, "Development of MEMS-based Piezoelectric Vibration Energy Harvesters", SEC IMAC, 02/2010.

Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear-Stress Sensor Using Stokes Layer Excitation", 36th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 98-0585, Reno, NV, January, 1998.

Chandrasekaran, V., A. Cain, T. Nishida, and M. Sheplak, "Dynamic Calibration Technique for Thermal Shear Stress Sensors with Variable Mean Flow", 38th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2000-0508, Reno, NV, January, 2000.

Barnard, C., D. Mills, J. Meloy, and M. Sheplak, "Development of a Hydraulically Smooth Wall Shear Stress Sensor Utilizing Through Silicon Vias", Hilton Head 2016 Workshop, 2016.

Phipps, A., F. Liu, L. Cattafesta, M. Sheplak, and T. Nishida, "Demonstration of a wireless, self-powered electroacoustic liner system", J. Acoust. Soc. Am, vol. 125, no. 2, pp. 873-881, FEB, 2009.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Development of a micromachined piezoelectric microphone for aeroacoustics applications", J. Acoust. Soc. Am., vol. 122, no. 6, pp. 3428-3436, DEC, 2007.

Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "A directional acoustic array using silicon micromachined piezoresistive microphones", J. Acous. Soc. Amer., vol. 113, no. 1, pp. 289-298, JAN, 2003.

Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear Stress Sensor using Stokes Layer Excitation", AIAA Journal, vol. 39, issue 5, no. 5, pp. 819-823, JUN, 2001.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Dynamic calibration technique for thermal shear-stress sensors", Experiments in Fluids, vol. 38, pp. 56-65, JUL, 2005.

Martin, D., "Design, fabrication, and characterization of a MEMS dual-backplate capacitive microphone", Deparment of Electrical and Computer Engineering, vol. Ph.D., Gainesville, University of Florida, pp. 250, 2007.