Publications

Mills, D. A., W. C. Patterson, B. Freidkes, C. Keane, and M. Sheplak, "Characterization of a Fully-Differential, Dual-Axis, Capacitive Wall Shear Stress Sensor System for Low-Speed Wind Tunnels", AIAA Aviation 2019 ForumAIAA Aviation 2019 Forum, Dallas, TexasReston, Virginia, American Institute of Aeronautics and Astronautics, 2019.

Pabon, R. J., L. Ukeiley, M. Sheplak, and C. Barnard Keane, "Characteristics of turbulent boundary layer large scale motions using direct fluctuating wall shear stress measurements", Physical Review Fluids, vol. 3, issue 11, Jan-11-2018.

Mills, D. A., W. C. Patterson, C. Keane, and M. Sheplak, "Characterization of a Fully-Differential Capacitive Wall Shear Stress Sensor for Low-Speed Wind Tunnels", 2018 AIAA Aerospace Sciences Meeting2018 AIAA Aerospace Sciences Meeting, Kissimmee, FloridaReston, Virginia, American Institute of Aeronautics and Astronautics, 2018.

Mills, D. A., C. Barnard, and M. Sheplak, "Characterization of a Hydraulically Smooth Wall Shear Stress Sensor for Low-Speed Wind Tunnel Applications", 55th AIAA Aerospace Sciences Meeting55th AIAA Aerospace Sciences Meeting, Grapevine, TexasReston, Virginia, American Institute of Aeronautics and Astronautics, 2017.

Pabon, R., D. A. Mills, L. S. Ukeiley, and M. Sheplak, "Convection of wall shear stress events in a turbulent boundary layer", 70th APS Division of Fluid Dynamics, Denver, CO, 2017.

Sawant, S. G., I. Eskinazi, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Comparative Study of Two Methods for Driving Electrodynamic Zero-Net Mass-Flux Actuators", AIAA Journal, vol. 51, issue 9, pp. 2286 - 2290, 09/2013.

Williams, M. D., B. A. Griffin, T. N. Reagan, J. R. Underbrink, and M. Sheplak, "Characterization of Aeroacoustic MEMS Microphones for Aircraft Fuselage Arrays", AIAA Journal, vol. 50, pp. 2744-2752, 12/2012.

Sawant, S. G., I. Eskinazi, M. Sheplak, L. Cattafesta, and D. P. Arnold, "A comparative study of two methods for driving electrodynamic zero-net-mass-flux actuators", 6th AIAA Flow Control Conf., New Orleans, LA, AIAA, 06/2012.

Homeijer, B., B. A. Griffin, M. D. Williams, B. V. Sankar, and M. Sheplak, "Composite Circular Plates with Residual Tensile Stress Undergoing Large Deflections", Journal of Applied Mechanics, vol. 79, no. 2: ASME, 03/2012.

Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Characterization of a MEMS-Based Floating Element Shear Stress Sensor", 47th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, 01/2009.

Schultz, T., F. Liu, M. Sheplak, L. Cattafesta, and M. Jones, "A Comparison Study of Normal-Incidence Acoustic Impedance Measurements of a Perforate Liner", 15th AIAA/CEAS Aeroacoustics conference, AIAA 2009-3301, Miami, FL, May, 2009.

Schultz, T., L. Cattafesta, and M. Sheplak, "Comparison of the two microphone method and the modal decomposition method for acoustic impedance testing", 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2695, Cambridge, MA, May, 2006.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Wang, Z., J. Li, P. Stoica, M. Sheplak, and T. Nishida, "Constant-Beamwidth and Constant-Powerwidth Wideband Robust Capon Beamformers for Acoustic Imaging", J. Acoust. Soc. Am., vol. 116, no. 3, pp. 1621-1631, SEP, 2004.

Sheplak, M., A. Cain, T. Nishida, and L. Cattafesta, "Characterization of a Micromachined Thermal Shear Stress Sensor", AIAA Journal, vol. 40, no. 6, pp. 1099-1104, APR, 2002.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", International Journal of Aeroacoustics, vol. 1, no. 2, pp. 183-205, APR, 2002.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0666, Reno, NV, January, 2002.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Compliant-Backplate Helmholtz Resonators for Active Noise Control Applications", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0817, Reno, NV, January, 2001.

Sheplak, M., E. Spina, and C. McGinley, "Characterization of a Hot-Film Probe for Hypersonic Flow", 6th AIAA International Aerospace Plane and Hypersonic Technologies Conference, AIAA Paper 95-6110, Nashville, TN, April, 1995.

Sheplak, M., and E. Spina, "Control of High-Speed Impinging Jet Resonance", AIAA Journal, vol. 32, no. 8, pp. 1583-1588, JUL, 1994.