Publications

Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.

Cattafesta, L., Y. Tian, and R. Mittal, The Aerodynamics of Heavy Vehicles II: Trucks, Buses, and Trains, Lecture Notes in Applied and Computational Mechanics, vol. 21: Springer, pp. 151-160, DEC, 2008.

Zhang, J., and H. Z. Fan, "Aptamer-enabled tumor cell isolation", Circulating Tumor Cells: Isolation and Analysis : Wiley, 2016.

R Isfahani, N., and S. Moghaddam, "Absorption Characteristics of Thin Lithium Bromide (LiBr) Solution Film Constrained by a Porous Hydrophobic Membrane", ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, Sapporo, Japan, 06/2013.

Rao, Y., and D. P. Arnold, "An ac/dc voltage doubler with configurable power supply schemes for vibrational energy harvesting", Proc. 28th Applied Power Electronics Conf. & Exposition (APEC 2013), Long Beach, CA, IEEE, 03/2013.

Wetzel, D., F. Liu, B. Rosenberg, and L. Cattafesta, "Acoustic Characteristics of a Circulation Control Airfoil", 15th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2009-3103, Miami, FL, May, 2009.

Rassay, S., F. Hakim, M. Ramezani, and R. Tabrizian, "Acoustically Coupled Wideband RF Filters with Bandwidth Reconfigurablity Using Ferroelectric Aluminum Scandium Nitride Film", 2020 IEEE 33rd International Conference on Micro Electro Mechanical Systems (MEMS)2020 IEEE 33rd International Conference on Micro Electro Mechanical Systems (MEMS), Vancouver, BC, Canada, IEEE, 2020.

Tian, Y., L. Cattafesta, and R. Mittal, "Adaptive Control of Separated Flow", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1401, Reno, NV, January, 2006.

Tian, Y., Q. Song, and L. Cattafesta, "Adaptive Feedback Control of Flow Separation", 3rd Flow Control Conference, AIAA Paper 2006-3016, San Francisco, CA, June, 2006.

Cattafesta, L., and A. Pillarisetti, "Adaptive identification of fluid dynamic systems", 31th fluid dynamics conference & Exhibit, AIAA paper 2001-2978, June, 2001.

Kim, J., K. Lee, K. W. Oh, and Y.K. Yoon, "Adjustable refractive index method for complex microstructures by automated dynamic mode multidirectional UV lithography", International Conference of IEEE Micro Electro Mechanical Systems, Sorrento, Italy, 01/2009.

Garraud, A., and D. P. Arnold, "Advancements in electrodynamic wireless power transmission", IEEE Sensors Conf., Orlando,FL, 10.2016.

Garraud, A., and D. P. Arnold, "Advancements in electrodynamic wireless power transmission", 2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.

Bahr, C., J. Li, and L. Cattafesta, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Carroll, B., E. Boulos, M. Sytsma, L. Cattafesta, J. Hubner, and M. Sheplak, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.

Jia, K., S. Pal, and H. Xie, "An Agile Tip-Tilt-Piston Micromirror With Large Aperture, Large Scanning Range and Low Driving Voltage", Hilton Head 2008, Technical Digest pp. 284-287, 2008.

Williams, M. D., B. A. Griffin, A. Ecker, J. Meloy, and M. Sheplak, "An Aluminum Nitride Piezoelectric Microphone for Aeroacoustics Applications", Hilton Head 2010: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, Transducer Research Foundation, Inc., 06/2010.

Pal, S., and H. Xie, "Analysis and Simulation of Curved Bimorph Microactuators", Microtech Conference and Expo (Nanotech 2010 vol. 2), Anaheim, CA, NSTI, 2010.

Wang, G., B. V. Sankar, L. Cattafesta, and M. Sheplak, "Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS", International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.

Bahr, C., F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.

Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.

Pal, S., and H. Xie, "Analysis, simulation and fabrication of curved multimorphs that undergo bending and twisting", Sensors, 2011 IEEE, pp. 667-670, Oct, 2011.

Todd, S., and H. Xie, "An analytical electrothermal model of a 1D electrothermal MEMS micromirror", Smart Structures, Devices, and Systems IIProceedings of SPIE, vol. 5649, Sydney, Australia, SPIE, pp. 344 - 353, 2005.

Todd, S., and H. Xie, "An Analytical Electrothermal Model of a 1-D Electrothermal MEMS Micromirror", SPIE International Symposium on Smart Materials, Nano-, and Micro-Smart Systems, Sydney, Australia, December, 2004.

Chandrasekaran, V., B. V. Sankar, L. Cattafesta, T. Nishida, and M. Sheplak, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.