Publications

Hsu, A., C. Cowan, W. Chu, B. McCoy, A. Wong-Foy, R. Pelrine, C. Velez, D. P. Arnold, J. Lake, J. Ballard, et al., "Automated 2D micro-assembly using diamagnetically levitated milli-robots", 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Montreal, QC, IEEE, 2017.

Cheng, J., W. Liu, Q. Chen, N. Xu, Q. Sun, Y. Liu, W. Wang, and H. Xie, "An auto-aligned vertical comb drive for low-cost variable optical attenuators", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.

Peterson, B., F. Herrault, O. D. Oniku, Z. A. Kaufman, and D. P. Arnold, "Assessment of laser-induced damage in laser-micromachined rare-earth permanent magnets", IEEE Trans. Magn., vol. 48, no. 11, 2012.

Bauer, M., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Assembly of magnetoelectric nanowires into magnetic field sensors", 2017 Electronic Materials and Applications Conference, Orlando, FL, 2017.

Alvi, F., and L. Cattafesta, "The art and science of flow control – case studies using flow visualization methods", The European Physical Journal - Special Topics, vol. 182, issue 1, pp. 97-112, 04/2010.

Bauer, M., D. P. Arnold, and J. Andrew, "Arrays of Janus-Type Magnetoelectric Nanowires for Passive Magnetic Field Sensing", 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO), Cork, Ireland, IEEE, 2018.

Zhang, J., and H. Z. Fan, "Aptamer-enabled tumor cell isolation", Circulating Tumor Cells: Isolation and Analysis : Wiley, 2016.

Sheng, W., T. Chen, R. Kamath, X. Xiong, W. Tan, and Z.H. Fan, "Aptamer-Enabled Efficient Isolation of Cancer Cells from Whole Blood Using a Microfluidic Device", Analytical Chemistry, vol. 84, issue 9, pp. 4199 - 4206, 05/2012.

Xu, Y., J. A. Phillips, J. Yan, Q. Li, H. Z. Fan, and W. Tan, "Aptamer-Based Microfluidic Device for Enrichment, Sorting, and Detection of Multiple Cancer Cells", Analytical Chemistry, vol. 81, issue 17, pp. 7436 - 7442, 09/2009.

Schultz, T., M. Sheplak, and L. Cattafesta, "Application of multivariate uncertainty analysis to frequency response function estimates", J. Sound Vib., vol. 305, no. 1-2, pp. 116-133, AUG, 2007.

Griffin, J., T. Schultz, R. Holman, L. Ukeiley, and L. Cattafesta, "Application of multivariate outlier detection to fluid velocity measurements", Experiments in Fluids, vol. 49, issue 1, pp. 305-317, 07/2010.

Murray, N., and L. Ukeiley, "An Application of Gappy POD; for Subsonic Cavity Flow PIV Data", Experiments in Fluids, vol. 42, no. 1, pp. 79-91, JAN, 2007.

Jo, B., M. Ghatge, and R. Tabrizian, "Anti-symmetric shear-extensional AlN lamb-wave resonators with kt ² > 4%", 2017 Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium ((EFTF/IFC), BESANÇON, France, IEEE, 2017.

Lomenzo, P. D., Q. Takmeel, S. Moghaddam, and T. Nishida, "Annealing behavior of ferroelectric Si-doped HfO2 thin films", Thin Solid Films, vol. 615, pp. 139 - 144, Jan-09-2016.

Liu, Y., D. Wang, and D. F. Wang, "Analytical study on effect of piezoelectric patterns on frequency shift and support loss in ring-shaped resonators for biomedical applications", Microsystem Technologies, vol. 23, issue 7, pp. 2899 - 2909, Jan-07-2017.

Chandrasekaran, V., B. V. Sankar, L. Cattafesta, T. Nishida, and M. Sheplak, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.

Todd, S., and H. Xie, "An Analytical Electrothermal Model of a 1-D Electrothermal MEMS Micromirror", SPIE International Symposium on Smart Materials, Nano-, and Micro-Smart Systems, Sydney, Australia, December, 2004.

Todd, S., and H. Xie, "An analytical electrothermal model of a 1D electrothermal MEMS micromirror", Smart Structures, Devices, and Systems IIProceedings of SPIE, vol. 5649, Sydney, Australia, SPIE, pp. 344 - 353, 2005.

Prasad, S., Q. Gallas, S. Horowitz, B. Homeijer, B. V. Sankar, L. Cattafesta, and M. Sheplak, "An Analytical Electroacoustic Model of a Piezoelectric Composite Circular Plate", AIAA Journal, vol. 44, no. 10, pp. 2311-2318, OCT, 2006.

Pal, S., and H. Xie, "Analysis, simulation and fabrication of curved multimorphs that undergo bending and twisting", Sensors, 2011 IEEE, pp. 667-670, Oct, 2011.

Bigham, S., and S. Moghaddam, "Analysis of Microchannel Flow Boiling Process using Unprecedented Microscale Experimental Data", ASME HT/FE/ICNMM 2016, 2016.

Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.

Bahr, C., F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.

Halim, M. A., A. A. Rendon-Hernandez, S. E. Smith, and D. P. Arnold, "Analysis of a Dual-Transduction Receiver for Electrodynamic Wireless Power Transfer", IEEE Transactions on Power Electronics, vol. 37, issue 6, pp. 7470 - 7479, Jan-06-2022.

Wang, G., B. V. Sankar, L. Cattafesta, and M. Sheplak, "Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS", International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.